well, i'm back again !!! I have reinstalled PPP and now when i make : `dmesg | grep PPP`, i've got a message which indicates me that i have ppp. i've tried to connect with /dev/ttyS3 but it doesn't work... can you tell me what is the command line to get to connect ? the one i use is : pppd /dev/ttyS3 38400 `chat -v "" ATDT <phone> CONNECT "" ogin: <login> word: <password>` -detach debug crtscts modem defaultroute 0.0.0.0: where 0.0.0.0 is my ip adress( it is not this one, it's an example) one thing, i've got a USR Sportster Winmodem 33.6 PC, does is work under Linux ?
Jens B. Jorgensen wrote: > Ok, if your modem is com4 under windows then in Linux it should be > /dev/ttyS3. The process ppp is all-lowercase, so your grep command > below > wouldn't find it. Are you using xisp or something similar to control > dialup? > > Lily wrote: > > > Ok !!! but i've tried with it... all i know is that my modem is on > com 4 > > under windows > > what would it be under Linux... > > and when i do `dmesg | grep PPP` there is nothing although i have > > installed ppp and recompiled the kernel of Linux, make the modules > and > > install it... > > So, what can i do more precisly ?? > > > > Jens B. Jorgensen wrote: > > > > > The 'cuaX' naming convention for serial devices is deprecated. Now > > > > serial > > > devices are named like /dev/ttyS0, /dev/ttyS1, etc. Good luck. > > > > > > Lily wrote: > > > > > > > Hello, i'm Lily(nickname) !!! > > > > my problem is that i want to have internet under Linux but i > don't > > > have > > > > '/dev/cua?' . > > > > How can i do to have these ( i have already try with MAKEDEV but > > > > > nothing) ?? > > > > thanks for all... > > > > > > -- > > > Jens B. Jorgensen > > > [EMAIL PROTECTED] > > -- > Jens B. Jorgensen > [EMAIL PROTECTED] -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
