Eimar
So I have remove ide-scsi from the /etc/modules and
from the lilo.conf and ran lilo again to update the
MBR
here is the output after rebooting
cdrecord -scanbus dev=ATAPI
Cdrecord-Clone 2.01a38 (i686-pc-linux-gnu) Copyright
(C) 1995-2004 J\uffffrg Schilling
NOTE: this version of cdrecord is an inofficial
(modified) release of cdrecord
and thus may have bugs that are not present in
the original version.
Please send bug reports and support requests to
<[EMAIL PROTECTED]>.
The original author should not be bothered with
problems of this version.
cdrecord: Warning: Running on Linux-2.6.9-1-k7
cdrecord: There are unsettled issues with Linux-2.5
and newer.
cdrecord: If you have unexpected problems, please try
Linux-2.4 or Solaris.
cdrecord: Warning: Linux-2.6.8 introduced incompatible
interface changes.
cdrecord: Warning: SCSI transport does no longer work
for suid root programs.
cdrecord: Warning: if cdrecord fails, try to run it
from a root account.
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems
to be unmaintained.
Warning: There is absolutely NO DMA, operations thus
are slow.
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) 'PLEXTOR ' 'CD-R PX-W1610A'
'1.04' Removable CD-ROM
0,1,0 1) 'PIONEER ' 'DVD-ROM DVD-116 '
'1.22' Removable CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
cdrecord -prcap
Cdrecord-Clone 2.01a38 (i686-pc-linux-gnu) Copyright
(C) 1995-2004 J\uffffrg Schilling
NOTE: this version of cdrecord is an inofficial
(modified) release of cdrecord
and thus may have bugs that are not present in
the original version.
Please send bug reports and support requests to
<[EMAIL PROTECTED]>.
The original author should not be bothered with
problems of this version.
cdrecord: Warning: Running on Linux-2.6.9-1-k7
cdrecord: There are unsettled issues with Linux-2.5
and newer.
cdrecord: If you have unexpected problems, please try
Linux-2.4 or Solaris.
cdrecord: Warning: Linux-2.6.8 introduced incompatible
interface changes.
cdrecord: Warning: SCSI transport does no longer work
for suid root programs.
cdrecord: Warning: if cdrecord fails, try to run it
from a root account.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not
supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W1610A'
Revision : '1.04'
Device seems to be: Generic mmc CD-RW.
Drive capabilities, per MMC-3 page 2A:
Does read CD-R media
Does write CD-R media
Does read CD-RW media
Does write CD-RW media
Does not read DVD-ROM media
Does not read DVD-R media
Does not write DVD-R media
Does not read DVD-RAM media
Does not write DVD-RAM media
Does support test writing
Does read Mode 2 Form 1 blocks
Does read Mode 2 Form 2 blocks
Does read digital audio blocks
Does restart non-streamed digital audio reads
accurately
Does support Buffer-Underrun-Free recording
Does read multi-session CDs
Does read fixed-packet CD media using Method 2
Does not read CD bar code
Does read R-W subcode information
Does return R-W subcode de-interleaved and
error-corrected
Does read raw P-W subcode data from lead in
Does return CD media catalog number
Does return CD ISRC information
Does support C2 error pointers
Does deliver composite A/V data
Does play audio CDs
Number of volume control levels: 256
Does support individual volume control setting for
each channel
Does support independent mute setting for each
channel
Does not support digital output on port 1
Does not support digital output on port 2
Loading mechanism type: tray
Does support ejection of CD via START/STOP command
Does not lock media on power up via prevent jumper
Does allow media to be locked in the drive via
PREVENT/ALLOW command
Is not currently in a media-locked state
Does not support changing side of disk
Does not have load-empty-slot-in-changer feature
Does not support Individual Disk Present feature
Maximum read speed: 7056 kB/s (CD 40x, DVD 5x)
Current read speed: 7056 kB/s (CD 40x, DVD 5x)
Maximum write speed: 2822 kB/s (CD 16x, DVD 2x)
Current write speed: 2822 kB/s (CD 16x, DVD 2x)
Rotational control selected: CLV/PCAV
Buffer size in KB: 2048
Copy management revision supported: 0
Number of supported write speeds: 5
Write speed # 0: 2822 kB/s CLV/PCAV (CD 16x, DVD
2x)
Write speed # 1: 2117 kB/s CLV/PCAV (CD 12x, DVD
1x)
Write speed # 2: 1411 kB/s CLV/PCAV (CD 8x, DVD
1x)
Write speed # 3: 706 kB/s CLV/PCAV (CD 4x, DVD
0x)
Write speed # 4: 176 kB/s CLV/PCAV (CD 1x, DVD
0x)
Thanks
Manu
--- Elimar Riesebieter <[EMAIL PROTECTED]> wrote:
> On Sat, 08 Jan 2005 the mental interface of
> Manu told:
>
> > Hi
> >
> > I am using kernel 2.6.9 and udev
> > I have a CD/DVD /dev/hdd and mounted to /cdrom
> > (I do not have a /dev/cdrom for some reasons...)
> >
> > I have a CD Writer /dev/hdc (appearing at boot
> time
> > but cannot see it in the /dev )
> >
> > How can I have my CD writer acting like the CD/DVD
> > (appearing as a device in /dev , gnome etc...)
> >
> > I have the following modules loaded:
> > ide_scsi 17220 0
> > scsi_mod 125132 3
> > usb_storage,sr_mod,ide_scsi
> > ide_cd 42464 0
> > cdrom 40540 2 sr_mod,ide_cd
> > ide_core 141936 6
> >
>
usb_storage,ide_scsi,ide_cd,ide_generic,via82cxxx,ide_disk
> Don't use ide-scsi with 2.6 Kernels ;-). Remove the
> /dev/hd??=ide-scsi bootoption. Reboot. And tell us
> the output of
> $ cdrecord -scanbud dev=ATAPI
> $ cdrecord -precap
>
> Ciao
>
> Elimar
>
>
> --
> We all know Linux is great... it does infinite
> loops in 5 seconds.
> -- Linus Torvalds
>
> ATTACHMENT part 2 application/pgp-signature
name=signature.asc
__________________________________
Do you Yahoo!?
The all-new My Yahoo! - Get yours free!
http://my.yahoo.com
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
