"Gary Parker" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > Brian <bcap <at> clara.co.uk> writes: > > Woody (installed from a CD set). I . . . > > The Woody install seems to have given me 2.2.20. > > You can have a 2.4 kernel installed with something like "linux2.4" at the boot > prompt of the install cd. But yes, the default is a 2.2 kernel. > > > Thus, my command line is this: > > > > sh NVIDIA-Linux-x86-1.0-5328-pkg1.run --kernel-include-path > > /usr/src/kernel-source-2.2.20/include > > > > But, I still get the error described above. > > I had similar troubles with an Nvidia GForce 4 card a few months ago. After > many failed attempts with the nvidia installer I installed a 2.4 kernel. The > Woody CDs should have at least kernel-image-2.4.18-686 (the last three digits > are for your architecture, change it as necessary). I would recommend a 2.4 > kernel if you want to stay with Woody for now. Although, it may be better for > you, in the long run, to upgrade to Sid (unstable). > > Anyway, to get a new kernel try: > # apt-get install kernel-image-2.4.18-686 > # apt-get install kernel-headers-2.4.18-686 > > You may need kernel-source-2.4.18-686 also, but I don't think so > > Then you will need to run something like the following: > sh NVIDIA-Linux-x86-1.0-4349.run \ > --kernel-include-path=/usr/src/kernel-headers-2.4.18-386/include/ \ > --kernel-install-path=/lib/modules/2.4.18-386/kernel/drivers/video/ > > If this works, you then need to install the module: > # modprobe nvidia > > Then try startx. This is what worked for me after much research on the web. > > I still think that you need to permenently add the module to /etc/modules. I > believe that you do this with modconf, or you can just enter it my hand if > modprobe worked the first time. > > For installing debian packages in the future I would recommend two things. > First, check out the debian packages page: > http://www.debian.org/distrib/packages > > There is a nice package search tool at the bottom. > > Second install aptitude: > # apt-get install aptitude > > It has a nice interface for looking through available debian packages and > installing them. Aptitude does use the /etc/apt/sources.list file, which right > now probably contains only a list of your CDs. > > Also, I did eventually give up on Woody. I am now running Sid. I had to buy a > couple of DVDs because my internet connection is painfully slow. My vidio > display is fine with the modules provided with Sid. None of the above would be > necessary if you did upgrade to Sid. It is worth it, IMHO. > > If you have a fast internet connection then try to edit your sources.list to > something like: > deb http://http.us.debian.org/debian unstable main contrib non-free > deb http://non-us.debian.org/debian-non-US unstable/non-US main contrib non-free > > You would need to comment out (#) or delete the lines for your CDs. > > Then do the following: > # apt-get update > # apt-get dist-upgrade > > Hope this helps. > > Gary Parker > Cayuse, Oregon >
Hi Gary, and thanks - it's good to know that there's someone else who has suffered and won through with an Nvidia card! I'm going to try the complete upgrade before anything else, since that is clearly the unanimous recommendation of all the wonderful people who have tried to help! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
