One more this is while doing
dpkg-reconfigure -plow xserver-xfree86
How do I specify my video card BUS identifier?
-----Original Message-----
From: Rituraj Buddhisagar
Sent: Friday, October 15, 2004 5:59 PM
To: 'Nick Hastings'; [EMAIL PROTECTED]
Subject: RE: x server configuration problems
I am getting the same problem. Getting just 640X480 (I posted earlier to this maillist saying 800x600 sorry I was wrong)
I am attaching the logfile herewith after doing the following:
X > logfile 2>&1 &
sleep 10
killall X
######################logs###############
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED] Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-8 20040928112350 [EMAIL PROTECTED])
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.26 i686 [ELF]
Build Date: 28 September 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.27-1-686 ([EMAIL PROTECTED]) (gcc version 3.3.4 (Debian 1:3.3.4-9)) #1 Fri Sep 3 06:28:00 UTC 2004
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 15 23:13:24 2004
(==) Using config file: "/etc/X11/XF86Config-4"
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found
##################################################################
My monitor is Dell 773S. I also tried with Samsung Syncmaster 793s.
Video card is: Intel 82865G
I also did this as someone suggested:
>Make sure that you have `discover' installed (apt-get install
>discover) then try and reconfigure the server again with low priority.
>dpkg-reconfigure -plow xserver-xfree86
Still same resolution!
Please help
Thanks and Regards;
Rituraj
-----Original Message-----
From: Nick Hastings [mailto:[EMAIL PROTECTED]] On Behalf Of Nick Hastings
Sent: Friday, October 15, 2004 3:32 PM
To: [EMAIL PROTECTED]
Subject: Re: x server configuration problems
Hi,
* Sebastien Venot <[EMAIL PROTECTED]> [041015 18:34]:
> Hello everyone,
>
> i m new to Debian. I managed more or less to install debian successfully.
> My problem is that i cannot change the resolution of my screen.it keeps the
> size 800x600.
> i would like to use the resolution 1027x768.
> I configured many times the x server using the command:
> dpkg-reconfigure xserver-xfree86
Make sure that you have `discover' installed (apt-get install
discover) then try and reconfigure the server again with low priority.
dpkg-reconfigure -plow xserver-xfree86
> i also tried to change the config file.
> My monitor is a Nokia 500Xa.
> In each configuration, i only enabled 1024x768 and removed all other modes.
>
> the resolution is still 800x600.
>
> What is the problem?
Try the above, and if it doesn't help, report back to the list with
details including:
- the version of Debian you are installing
- your video card
> Who has a perfect X server configuration for me??
Depends on the above.
Cheers,
Nick.
--
Debian 3.1
Linux twofish 2.6.8-looxt93c4 i686 GNU/Linux
