On Wed, Aug 25, 2004 at 01:32:08PM +0200, Jacob Friis Larsen wrote: > How can I make my system run with full duplex? > > In /var/log/dmesg I see: > tg3: eth1: Link is up at 100 Mbps, half duplex. > tg3: eth1: Flow control is off for TX and off for RX. > tg3: eth0: Link is up at 100 Mbps, half duplex. > tg3: eth0: Flow control is off for TX and off for RX. > > Thanks, > Jacob > > > -- Hi Jacob,
here is snip of http://www.ovislink.com.tw/DRIVERS/8139/linux-help.htm -------------------------------- (3.) Adjusting speed: Driver is designed with the goal that no options should be needed in most environment. However not all cards and networks can be automatically configured, thus allow operational parameters to be modify when they are loaded as module. Typically the following variables may be set: insmod rtl8139 options=0x40 Hex Decimal Meaning 0x10 16 â..Force Full-Duplex operation (must be used with 0x20 or 0x40) 0x20 32 â..Force 100mbps-only operation 0x40 64 â..Force 10mbps-only If loading as a module and configured /etc/conf.modules alias eth0 rtl8139 options options=0x40 -------------------------------- -Kev -- (__) (oo) /------\/ / | || * /\---/\ ~~ ~~ ...."Have you mooed today?"...
signature.asc
Description: Digital signature
