You may have accidentally installed GPM and did not configure
/etc/X11/XF86Config-4 accordingly.

Despite other posters despise GPM, I love it.

All you have to do is to let the X read from repeater.

See my document at 
 http://www.debian.org/doc/manuals/reference/ch-install.en.html#s3.3

On Fri, Nov 01, 2002 at 08:12:00PM +0100, Christian Banik wrote:
> Dear Debian Users, 
>  
> i've got problems with my wheel mouse. I wrote the /etc/X11/XF86Config-4 file 
> myself (no concept of some of the entries there)in parts.  
> It worked 2 weeks very good, but now the mouse arrow freeze after 30 seconds 
> under X11. I've added my XF86 Config file, perhaps you see my mistake. The 
> configured and generic mouse are both necessary i realized. 
> Under SuSE the same mouse is OK, so it's not a hardware problem 
>  
> Thanks a lot Christian 
>  
> ### BEGIN DEBCONF SECTION
> # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
> # Debian X Configuration tool, using values from the debconf database.
> #
> # Edit this file with caution, and see the XF86Config-4 manual page.
> # (Type "man XF86Config-4" at the shell prompt.)
> #
> # If you want your changes to this file preserved by dexconf, only make 
> changes
> # before the "### BEGIN DEBCONF SECTION" line above, and/or after the
> # "### END DEBCONF SECTION" line below.
> #
> # To change things within the debconf section, run the command:
> #   dpkg-reconfigure xserver-xfree86
> # as root.  Also see "How do I add custom sections to a dexconf-generated
> # XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.
> 
> Section "Files"
>       FontPath        "unix/:7100"                    # local font server
>       # if the local font server has problems, we can fall back on these
>       FontPath        "/usr/lib/X11/fonts/misc"
>       FontPath        "/usr/lib/X11/fonts/cyrillic"
>       FontPath        "/usr/lib/X11/fonts/100dpi/:unscaled"
>       FontPath        "/usr/lib/X11/fonts/75dpi/:unscaled"
>       FontPath        "/usr/lib/X11/fonts/Type1"
>       FontPath        "/usr/lib/X11/fonts/Speedo"
>       FontPath        "/usr/lib/X11/fonts/100dpi"
>       FontPath        "/usr/lib/X11/fonts/75dpi"
> EndSection
> 
> Section "Module"
>       Load    "GLcore"
>       Load    "bitmap"
>       Load    "dbe"
>       Load    "ddc"
>       Load    "dri"
>       Load    "extmod"
>       Load    "freetype"
>       Load    "glx"
>       Load    "int10"
>       Load    "pex5"
>       Load    "record"
>       Load    "speedo"
>       Load    "type1"
>       Load    "vbe"
>       Load    "xie"
> EndSection
> 
> Section "InputDevice"
>       Identifier      "Generic Keyboard"
>       Driver          "keyboard"
>       Option          "CoreKeyboard"
>       Option          "XkbRules"      "xfree86"
>       Option          "XkbModel"      "pc104"
>       Option          "XkbLayout"     "de"
>       Option          "XkbVariant"    "nodeadkeys"
> EndSection
> 
> Section "InputDevice"
>       Identifier      "Configured Mouse"
>       Driver          "mouse"
>       Option          "CorePointer"
>       Option          "Device"                "/dev/psaux"
>       Option          "Protocol"              "ImPS/2"
>       Option          "Emulate3Buttons"       "true"
>       Option          "ZAxisMapping"          "4 5"
> EndSection
> 
> Section "InputDevice"
>       Identifier      "Generic Mouse"
>       Driver          "mouse"
>       Option          "SendCoreEvents"        "true"
>       Option          "Device"                "/dev/input/mice"
>       Option          "Protocol"              "ImPS/2"
>       Option          "Emulate3Buttons"       "true"
>       Option          "ZAxisMapping"          "4 5"
> EndSection
> 
> Section "Device"
>       Identifier      "Generic Video Card"
>       Driver          "nv"
>       Option          "dpms"          "true"
> EndSection
> 
> Section "Monitor"
>       Identifier      "Generic Monitor"
>       HorizSync       30-95
>       VertRefresh     50-75
>       Option          "DPMS"
>       UseModes        "Modes [0]"
> EndSection
> 
> Section "Modes"
>         Identifier      "Modes [0]"
>       Modeline        "640x480" 27.96 640 650 720 864 480 480 485 501
>       Modeline        "800x600" 43.68 800 816 928 1072 600 600 606 626
>       Modeline        "1024x768" 79.55 1024 1072 1248 1312 768 768 777 802
> EndSection
> 
> Section "Screen"
>       Identifier      "Default Screen"
>       Device          "Generic Video Card"
>       Monitor         "Generic Monitor"
>       DefaultDepth    24
>       SubSection "Display"
>               Depth           24
>               Modes           "1024x768" "800x600" "640x480"
>       EndSubSection
> EndSection
> 
> 
> Section "ServerLayout"
>       Identifier      "Default Layout"
>       Screen          "Default Screen"
>       InputDevice     "Generic Keyboard"
>       InputDevice     "Configured Mouse"
>       InputDevice     "Generic Mouse"
> EndSection
> 
> Section "DRI"
>       Mode    0660
> EndSection
> 
> ### END DEBCONF SECTION
> 
> 
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
> 
> 

-- 
~\^o^/~~~ ~\^.^/~~~ ~\^*^/~~~ ~\^_^/~~~ ~\^+^/~~~ ~\^:^/~~~ ~\^v^/~~~ +++++
        Osamu Aoki <[EMAIL PROTECTED]>   Cupertino CA USA, GPG-key: A8061F32
 .''`.  Debian Reference: post-installation user's guide for non-developers
 : :' : http://qref.sf.net and http://people.debian.org/~osamu
 `. `'  "Our Priorities are Our Users and Free Software" --- Social Contract


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to