you wrote it yourself but it says "Generated by dexconf" at the top? What I did was remove those lines saying ### BEGIN DEBCONF SECTION and END... then I removed all references to the "Generic Mouse" even in the "Server Layout" section. And I made a Option "SendCoreEvents" "true" entry to my "Configured Mouse"... also make sure you didnt accidentally install "gpm" along the way ps -A | grep gpm
HTH Shawn --- Christian Banik <[EMAIL PROTECTED]> wrote: > Dear Debian Users, > > i've got problems with my wheel mouse. I wrote the > /etc/X11/XF86Config-4 file > myself (no concept of some of the entries there)in parts. > It worked 2 weeks very good, but now the mouse arrow freeze after 30 > seconds > under X11. I've added my XF86 Config file, perhaps you see my > mistake. The > configured and generic mouse are both necessary i realized. > Under SuSE the same mouse is OK, so it's not a hardware problem > > Thanks a lot Christian > > ### BEGIN DEBCONF SECTION > # XF86Config-4 (XFree86 server configuration file) generated by > dexconf, the > # Debian X Configuration tool, using values from the debconf > database. > # > # Edit this file with caution, and see the XF86Config-4 manual page. > # (Type "man XF86Config-4" at the shell prompt.) > # > # If you want your changes to this file preserved by dexconf, only > make > changes > # before the "### BEGIN DEBCONF SECTION" line above, and/or after the > # "### END DEBCONF SECTION" line below. > # > # To change things within the debconf section, run the command: > # dpkg-reconfigure xserver-xfree86 > # as root. Also see "How do I add custom sections to a > dexconf-generated > # XF86Config or XF86Config-4 file?" in > /usr/share/doc/xfree86-common/FAQ.gz. > > Section "Files" > FontPath "unix/:7100" # local font server > # if the local font server has problems, we can fall back on these > FontPath "/usr/lib/X11/fonts/misc" > FontPath "/usr/lib/X11/fonts/cyrillic" > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/Type1" > FontPath "/usr/lib/X11/fonts/Speedo" > FontPath "/usr/lib/X11/fonts/100dpi" > FontPath "/usr/lib/X11/fonts/75dpi" > EndSection > > Section "Module" > Load "GLcore" > Load "bitmap" > Load "dbe" > Load "ddc" > Load "dri" > Load "extmod" > Load "freetype" > Load "glx" > Load "int10" > Load "pex5" > Load "record" > Load "speedo" > Load "type1" > Load "vbe" > Load "xie" > EndSection > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc104" > Option "XkbLayout" "de" > Option "XkbVariant" "nodeadkeys" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/psaux" > Option "Protocol" "ImPS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "InputDevice" > Identifier "Generic Mouse" > Driver "mouse" > Option "SendCoreEvents" "true" > Option "Device" "/dev/input/mice" > Option "Protocol" "ImPS/2" > Option "Emulate3Buttons" "true" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Device" > Identifier "Generic Video Card" > Driver "nv" > Option "dpms" "true" > EndSection > > Section "Monitor" > Identifier "Generic Monitor" > HorizSync 30-95 > VertRefresh 50-75 > Option "DPMS" > UseModes "Modes [0]" > EndSection > > Section "Modes" > Identifier "Modes [0]" > Modeline "640x480" 27.96 640 650 720 864 480 480 485 501 > Modeline "800x600" 43.68 800 816 928 1072 600 600 606 626 > Modeline "1024x768" 79.55 1024 1072 1248 1312 768 768 777 802 > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "Generic Video Card" > Monitor "Generic Monitor" > DefaultDepth 24 > SubSection "Display" > Depth 24 > Modes "1024x768" "800x600" "640x480" > EndSubSection > EndSection > > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > InputDevice "Generic Keyboard" > InputDevice "Configured Mouse" > InputDevice "Generic Mouse" > EndSection > > Section "DRI" > Mode 0660 > EndSection > > ### END DEBCONF SECTION > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > ===== Shawn Lamson Debian Gnu\Linux Sid Kernel 2.4.19-custom XFree86 Version 4.2.1 __________________________________________________ Do you Yahoo!? HotJobs - Search new jobs daily now http://hotjobs.yahoo.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
