Buenas, Que chip tiene esa tarjeta ?? Si es una RealTek 8139 creo que podre ayudarte
On Wed, 2003-02-19 at 21:16, David Cifre Garcia wrote: > > Hola, estoy desesperado. Llevo mucho tiempo mirando en google, y todas las > referencias que he encontrado al respecto no dan resultado. > > Así que voy a poner aquí paso a paso desde 0 que es lo que me pasa para ver > si > alguien me puede ayudar. > > Si necesitais algun dato más, alguna salida solo teneis que pedirmelo. > Deciros > solo que en Mandrake funciona, pese a que da un insmod error al arranque en > mandrake y no inicia la red, si luego lo haces tu manualmente iniciando > pcmcia y network funciona sin problemas. > > discover y kudzu no la detectan > > Hardware: > > Toshiba Satellite 1700-200 > Tarjeta de Red PCMCIA Surecom 32 bit 100/10 CardBus 428X/4B > > Debian woody 3.0 kernel bf24 > > En la instalación: > > -Configuro PCMCIA > -Eligo i82365 > -Dejo las opciones en blanco > -Se produce 1 pitido grave, no se enciendes las luces de la tarjeta. > -No cargo ningun controlador > -La instalación no me pide que meta los datos de la red (porque no ha > detectado la tarjeta por supuesto) > -Al pedirme que reinicie se produce un pitido agudo, las luces se enciende y > parpadean y se apaga la tarjeta a continuación. > -Arrancando se produce un pitido grave, y la tarjeta no se enciende. > > dmesg2.txt es la salida de dmesg > > Ahora edito el archivo interfaces que adjunto también > > $ifup eth0 > > Sale lo siguiente: > > SIOCSIFADDR: No such device > eth0: ERROR while getting interfaces flags:No such device > SIOCSINETMASK: No such device > eth0: ERROR while getting interfaces flags: No such device > > si hago otro $ifup me dice: > ifup: interface eth0 already configure > > pero si hago $ifconfig solo aparece lo, y no eth0 > > si hago > > $ifdown eth0 > > me dice: > > SIOCDELRT: No such device > > si hago $pcmcia status me dice > cardmgr is running... > > Al hacer un lspci -v con la tarjeta puesta me dice > > pcilib:cannot open /proc/bus/pci/02/000 > lspci:unable to read 64 bytes of conguration space > > Si hago lspci -v sin la tarjeta puesta me dice > lspci.txt adjunto > > también os pongo el lsmod en lsmod.txt > > Mantengo una relación amor/odio con debian. Llevo mucho tiempo queriendo > ponerla, y de hecho la he puesto varias veces. Pero siempre acabo volviendo a > mandrake. > > De hecho no me importa tener Debian y pelearme con las 3000 cosas!!! para que > todo funcione, al fin y al cabo lo poco que he aprendido de un linux a pelo > (incluido soltura básica con el vi) ha sido intentando configurar con la > debian. Pero por lo que no paso es por no tener internet y mientras no > consiga que funcione la tarjeta de red.... > > Saludos. > > > -- > > ID GNUPGP: 30E8FEF8 > pgp.rediris.es > > "La vida es una enfermedad de transmisión sexual con un 100% de mortalidad" > > "Bomba, terror, asesinar, matar, judíos, Allah, Jihad, goma 2, CIA, FBI, > Pentágono, Bin Laden, Bush, Sadam, Satan... Hola Echelon" > > ---- > > Linux version 2.4.18-bf2.4 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 > (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000eb800 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable) > BIOS-e820: 0000000007ff0000 - 0000000007fffc00 (ACPI data) > BIOS-e820: 0000000007fffc00 - 0000000008000000 (ACPI NVS) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > On node 0 totalpages: 32752 > zone(0): 4096 pages. > zone(1): 28656 pages. > zone(2): 0 pages. > Local APIC disabled by BIOS -- reenabling. > Could not enable APIC! > Kernel command line: auto BOOT_IMAGE=Linux ro root=303 > Initializing CPU#0 > Detected 646.835 MHz processor. > Console: colour VGA+ 80x25 > Calibrating delay loop... 1291.05 BogoMIPS > Memory: 125616k/131008k available (1783k kernel code, 5004k reserved, 549k > data, 280k init, 0k highmem) > Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) > Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) > Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) > Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) > Page-cache hash table entries: 32768 (order: 5, 131072 bytes) > CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 > CPU: L1 I cache: 16K, L1 D cache: 16K > CPU: L2 cache: 128K > CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 > CPU: Common caps: 0383f9ff 00000000 00000000 00000000 > CPU: Intel Celeron (Coppermine) stepping 06 > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... OK. > Checking for popad bug... OK. > POSIX conformance testing by UNIFIX > mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) > mtrr: detected mtrr type: Intel > PCI: PCI BIOS revision 2.10 entry at 0xfd9be, last bus=1 > PCI: Using configuration type 1 > PCI: Probing PCI hardware > Unknown bridge resource 2: assuming transparent > PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 > PCI: Found IRQ 10 for device 00:04.0 > PCI: Sharing IRQ 10 with 01:00.0 > PCI: Found IRQ 10 for device 00:04.1 > PCI: Cannot allocate resource region 4 of device 00:07.1 > Limiting direct PCI/PCI transfers. > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > Starting kswapd > VFS: Diskquotas version dquot_6.4.0 initialized > Journalled Block Device driver loaded > vga16fb: initializing > vga16fb: mapped to 0xc00a0000 > Console: switching to colour frame buffer device 80x30 > fb0: VGA16 VGA frame buffer device > pty: 256 Unix98 ptys configured > Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI > enabled > Real Time Clock Driver v1.10e > block: 128 slots per queue, batch=32 > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > Uniform Multi-Platform E-IDE driver Revision: 6.31 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > PIIX4: IDE controller on PCI bus 00 dev 39 > PIIX4: chipset revision 1 > PIIX4: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x1090-0x1097, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x1098-0x109f, BIOS settings: hdc:DMA, hdd:pio > hda: TOSHIBA MK6015MAP, ATA DISK drive > hdc: TOSHIBA CD-ROM XM-7002Bc, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: 11733120 sectors (6007 MB), CHS=730/255/63 > hdc: ATAPI 24X CD-ROM drive, 128kB Cache > Uniform CD-ROM driver Revision: 3.12 > ide-floppy driver 0.97.sv > Partition check: > hda: hda1 hda2 hda3 > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > Loading I2O Core - (c) Copyright 1999 Red Hat Software > I2O configuration manager v 0.04. > (C) Copyright 1999 Red Hat Software > loop: loaded (max 8 devices) > Compaq CISS Driver (v 2.4.5) > HDLC support module revision 1.02 for Linux 2.4 > Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 > Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. > ide-floppy driver 0.97.sv > Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found > Highpoint HPT370 Softwareraid driver for linux version 0.01 > No raid array found > SCSI subsystem driver Revision: 1.00 > Red Hat/Adaptec aacraid driver, Apr 14 2002 > DC390: 0 adapters found > 3ware Storage Controller device driver for Linux v1.02.00.016. > 3w-xxxx: No cards with valid units found. > request_module[scsi_hostadapter]: Root fs not mounted > request_module[scsi_hostadapter]: Root fs not mounted > i2o_scsi.c: Version 0.0.1 > chain_pool: 0 bytes @ c1204de0 > (512 byte buffers X 4 can_queue X 0 i2o controllers) > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP, IGMP > IP: routing cache hash table of 512 buckets, 4Kbytes > TCP: Hash tables configured (established 8192 bind 8192) > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > cramfs: wrong magic > FAT: bogus logical sector size 5632 > reiserfs: checking transaction log (device 03:03) ... > Using r5 hash to sort names > ReiserFS version 3.6.25 > VFS: Mounted root (reiserfs filesystem) readonly. > Freeing unused kernel memory: 280k freed > Adding Swap: 120480k swap-space (priority -1) > usb.c: registered new driver usbdevfs > usb.c: registered new driver hub > usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002 > usb-uhci.c: High bandwidth mode enabled > PCI: Enabling device 00:07.2 (0000 -> 0001) > PCI: Found IRQ 10 for device 00:07.2 > PCI: Sharing IRQ 10 with 00:10.0 > usb-uhci.c: USB UHCI at I/O 0x1060, IRQ 10 > usb-uhci.c: Detected 2 ports > usb.c: new USB bus registered, assigned bus number 1 > hub.c: USB hub found > hub.c: 2 ports detected > usb-uhci.c: v1.275:USB Universal Host Controller Interface driver > usb.c: registered new driver keyboard > usbkbd.c: :USB HID Boot Protocol keyboard driver > Linux PCMCIA Card Services 3.1.33 > kernel build: 2.4.18-bf2.4 unknown > options: [pci] [cardbus] [apm] > Intel ISA/PCI/CardBus PCIC probe: > PCI: Found IRQ 10 for device 00:04.0 > PCI: Sharing IRQ 10 with 01:00.0 > PCI: Found IRQ 10 for device 00:04.1 > TI 1420 rev 00 PCI-to-CardBus at slot 00:04, mem 0x10000000 > host opts [0]: [serial pci & irq] [pci irq 10] [lat 64/32] [bus 2/5] > host opts [1]: [serial pci & irq] [pci irq 10] [lat 64/32] [bus 6/9] > ISA irqs (scanned) = 3,4,7,11 PCI status changes > cs: cb_alloc(bus 2): vendor 0x10ec, device 0x8139 > ---- > > # /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) > > # The loopback interface > auto lo > iface lo inet loopback > > auto eth0 > iface eth0 inet static > address 172.26.0.5 > netmask 255.255.255.0 > gateway 172.26.0.1 > > ---- > > 00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 03) > Flags: bus master, medium devsel, latency 64 > Memory at e0000000 (32-bit, prefetchable) [size=64M] > Capabilities: [a0] AGP version 1.0 > > 00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) > (prog-if 00 [Normal decode]) > Flags: bus master, 66Mhz, medium devsel, latency 128 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > I/O behind bridge: 00002000-00002fff > Memory behind bridge: fc100000-fdffffff > > 00:04.0 CardBus bridge: Texas Instruments PCI1420 > Subsystem: Toshiba America Info Systems: Unknown device ff00 > Flags: bus master, medium devsel, latency 64, IRQ 10 > Memory at 10000000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=00, secondary=02, subordinate=05, sec-latency=32 > I/O window 0: 00000000-00000003 > I/O window 1: 00000000-00000003 > 16-bit legacy interface ports at 0001 > > 00:04.1 CardBus bridge: Texas Instruments PCI1420 > Subsystem: Toshiba America Info Systems: Unknown device ff00 > Flags: bus master, medium devsel, latency 64, IRQ 10 > Memory at 10001000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=00, secondary=06, subordinate=09, sec-latency=32 > I/O window 0: 00000000-00000003 > I/O window 1: 00000000-00000003 > 16-bit legacy interface ports at 0001 > > 00:07.0 Bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02) > Flags: bus master, medium devsel, latency 0 > > 00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80 > [Master]) > Flags: bus master, medium devsel, latency 64 > I/O ports at 1090 [size=16] > > 00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00 > [UHCI]) > Flags: bus master, medium devsel, latency 64, IRQ 10 > I/O ports at 1060 [size=32] > > 00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 03) > Flags: medium devsel, IRQ 9 > > 00:08.0 Multimedia audio controller: Cirrus Logic Crystal CS4281 PCI Audio > (rev 01) > Subsystem: Toshiba America Info Systems: Unknown device ff00 > Flags: medium devsel, IRQ 5 > Memory at fc010000 (32-bit, non-prefetchable) [disabled] [size=4K] > Memory at fc000000 (32-bit, non-prefetchable) [disabled] [size=64K] > Capabilities: [40] Power Management version 2 > > 00:10.0 Communication controller: Lucent Microelectronics LT WinModem > Subsystem: Askey Computer Corp.: Unknown device 4005 > Flags: medium devsel, IRQ 10 > Memory at fc011000 (32-bit, non-prefetchable) [disabled] [size=256] > I/O ports at 1080 [disabled] [size=8] > I/O ports at 1400 [disabled] [size=256] > Capabilities: [f8] Power Management version 2 > > 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP > 2x (rev 64) (prog-if 00 [VGA]) > Subsystem: Toshiba America Info Systems: Unknown device ff00 > Flags: bus master, stepping, medium devsel, latency 66, IRQ 10 > Memory at fd000000 (32-bit, non-prefetchable) [size=16M] > I/O ports at 2000 [size=256] > Memory at fc100000 (32-bit, non-prefetchable) [size=4K] > Expansion ROM at <unassigned> [disabled] [size=128K] > Capabilities: [50] AGP version 1.0 > Capabilities: [5c] Power Management version 1 > > ---- > > Module Size Used by Not tainted > ds 6624 2 > i82365 22416 2 > pcmcia_core 41408 0 [ds i82365] > keybdev 1664 0 (unused) > usbkbd 2848 0 (unused) > input 3072 0 [keybdev usbkbd] > usb-uhci 20708 0 (unused) > usbcore 48032 0 [usbkbd usb-uhci]
signature.asc
Description: This is a digitally signed message part
