Te da el error No core pointer. Generalmente cuando dan ese error, es porque no detecta bien el ratón, o algun device. Una solución es meter KnoppiX y copiar el archivo de configuracion de las X que KnoppiX usa en tu pc, y despues meterlo en Debian. Asi es como lo he hecho funcionar cuando he tenido esos problemas.
Saludos -- Fernando Membrive Guillén [EMAIL PROTECTED] www.membrive.tk On Sun, 03 Oct 2004 20:49:17 +0200, Juan Antonio Gomez Moriano <[EMAIL PROTECTED]> wrote: > Saludos a todo el mundo. > > Os comento lo que me ocurre, actualmente tengo instalado debian SID, > tendo dos Kernels: > > -2.2.20 : En este las X funcionan bien (salvo el refresco de pantalal > que está a 60Hz y lo quiero poner a 85) > > -2.6.7-1-386 : En este las X no van directamente, instalé los > controladores de Nvidia para este kernel y parece que dicha operación se > hizo correctamente, de hecho al hacer "startx", aparece el Logo de > Nvidia, pero luego aquello no va, el log dice : > > ********************************************* > (EE) xf86OpenSerial: Cannot open device /dev/psaux > No such device. > (EE) Configured Mouse: cannot open input device > (EE) PreInit failed for input device "Configured Mouse" > (II) UnloadModule: "mouse" > (**) Option "Protocol" "ImPS/2" > (**) Generic Mouse: Protocol: "ImPS/2" > (**) Option "SendCoreEvents" "true" > (**) Generic Mouse: always reports core events > (**) Option "Device" "/dev/input/mice" > (EE) xf86OpenSerial: Cannot open device /dev/input/mice > No such device. > (EE) Generic Mouse: cannot open input device > (EE) PreInit failed for input device "Generic Mouse" > (II) UnloadModule: "mouse" > (WW) No core pointer registered > No core pointer > > Fatal server error: > failed to initialize core devices > ********************************************* > > He probado ha hacer dpkg-reconfigure xfree... Pero la cosa sigue sin ir... > > El fichero de configuración de las X que funciona en el kernel 2.2.20 es > el mismo que uso para el kernel 2.6... lo dejo aquí : > > ********************************************* > ### BEGIN DEBCONF SECTION > # XF86Config-4 (XFree86 server configuration file) generated by dexconf, the > # Debian X Configuration tool, using values from the debconf database. > # > # Edit this file with caution, and see the XF86Config-4 manual page. > # (Type "man XF86Config-4" at the shell prompt.) > # > # If you want your changes to this file preserved by dexconf, only make > changes > # before the "### BEGIN DEBCONF SECTION" line above, and/or after the > # "### END DEBCONF SECTION" line below. > # > # To change things within the debconf section, run the command: > # dpkg-reconfigure xserver-xfree86 > # as root. Also see "How do I add custom sections to a dexconf-generated > # XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz. > > Section "Files" > FontPath "unix/:7100" # local font server > # if the local font server has problems, we can fall back on these > FontPath "/usr/lib/X11/fonts/misc" > FontPath "/usr/lib/X11/fonts/cyrillic" > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/Type1" > FontPath "/usr/lib/X11/fonts/Speedo" > FontPath "/usr/lib/X11/fonts/100dpi" > FontPath "/usr/lib/X11/fonts/75dpi" > EndSection > > Section "Module" > Load "GLcore" > Load "bitmap" > Load "dbe" > Load "ddc" > Load "dri" > Load "extmod" > Load "freetype" > #Load "glx" #Para driver nvidia > Load "int10" > Load "pex5" > Load "record" > Load "speedo" > Load "type1" > Load "vbe" > Load "xie" > EndSection > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc104" > Option "XkbLayout" "es" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/psaux" > Option "Protocol" "PS/2" > Option "Emulate3Buttons" "false" > Option "ZAxisMapping" "4 5" > EndSection > > Section "InputDevice" > Identifier "Generic Mouse" > Driver "mouse" > Option "SendCoreEvents" "true" > Option "Device" "/dev/input/mice" > Option "Protocol" "ImPS/2" > Option "Emulate3Buttons" "false" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Device" > Identifier "Generic Video Card" > Driver "vesa" > Option "UseFBDev" "true" > EndSection > > Section "Monitor" > Identifier "Generic Monitor" > HorizSync 31.5-64.3#70-100#31-80 #30-60 > VertRefresh 56-76#85-115#50-85 #50-75 > Option "DPMS" > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "Generic Video Card" > Monitor "Generic Monitor" > DefaultDepth 24 #16 > SubSection "Display" > Depth 1 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 4 > Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 8 > Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 15 > Modes "1280x960" "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 16 > Modes "1280x960" "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 24 > Modes "1280x960" "1024x768" "800x600" "640x480" > EndSubSection > EndSection > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > InputDevice "Generic Keyboard" > InputDevice "Configured Mouse" > InputDevice "Generic Mouse" > EndSection > > Section "DRI" > Mode 0666 > EndSection > > ### END DEBCONF SECTION > ********************************************* > > Como podéis ver estoy tirando del driver VESA (en el kernel 2.2 no > tengo puestos los de nvidia). > > Personalmente me lío un poco con el tema de los refrescos de pantalla > (vamos, que no se muy bien como va en el fichero, no hago más que probar > valores). > > Información sobre el equipo: > > Tarjeta de video : Nvidia GForceFX 5700 128MB > Monitor Philips 109E5 19" > Ratón y teclados por PS/2 > > Servidor X Xfree86 versión 4.3.0.dfsg.1-6 > > Saludos a todos y gracias de antemano. > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >
