Package: installation-reports INSTALL REPORT
Debian-installer-version: uname -a: Linux localhost 2.4.22-1-386 #9 Sat Oct 4 14:30:39 EST 2003 i686 GNU/Linux Date: Wed Nov 12 21:21:14 EST 2003 Method: How did you install? CD from http://gluck.debian.org/cdimage/testing/netinst/i386/sarge-i386-netinst.iso What did you boot off? CD If network install, from where? crosslink.net Proxied? No Machine: IBM PC 300PL Processor: Pentium II 400MHz Memory: 128MB Root Device: IDE, 6GB /dev/hda2 Root Size/partition table: /dev/hda1 1 49 393561 82 Linux swap /dev/hda2 * 50 784 5903887+ 83 Linux Filesystem Type Size Used Avail Use% Mounted on /dev/hda2 reiserfs 5.7G 678M 5.0G 12% / Output of lspci: 00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 00:02.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 00:02.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 00:02.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 00:02.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) 00:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05) 01:01.0 VGA compatible controller: S3 Inc. Trio 64 3D (rev 01) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [ ] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: Harware autodetect is a very welcome feature. Unfortunately, autodetect of my video card (S3) apparently didn't work, or Xfree configuration didn't see it, I had to enter it by hand. It would be really nice to have a kernel with XFS built in, either 2.6.x or patched 2.4.
