*This message was transferred with a trial version of CommuniGate(r) Pro*
Раньше использовал IDE-винт на 40 Gb, проблем никаких не было. Потом
решил преобрести еще один жесткий диск. В этот раз уже SATA на 400 Gb.
Но столкнулся с проблемой. Любое активное использование этого диска,
такое как проверка fsck при загрузке системы, активная запись больших
файлов, приводит к его отказу. Помогает только перезагрузка.
Перемонтирование не помогает. В windows с такими проблемами не
сталкиваюсь. Ниже приведена часть лога после возникновения ошибки.
~# cat /var/log/messages
Jul 26 14:08:17 krivedko kernel: [ 416.690335] ata1.00: configured for
UDMA/133
Jul 26 14:08:17 krivedko kernel: [ 416.690370] ata1: EH complete
Jul 26 14:08:26 krivedko kernel: [ 425.847105] res
51/40:00:29:bd:11/00:00:00:00:00/e0 Emask 0x9 (media error)
Jul 26 14:08:26 krivedko kernel: [ 425.873023] ata1.00: configured for
UDMA/133
Jul 26 14:08:26 krivedko kernel: [ 425.873057] ata1: EH complete
Jul 26 14:08:41 krivedko kernel: [ 441.272147] res
51/40:00:38:bd:11/00:00:00:00:00/e0 Emask 0x9 (media error)
Jul 26 14:08:41 krivedko kernel: [ 441.296818] ata1.00: configured for
UDMA/133
Jul 26 14:08:41 krivedko kernel: [ 441.296818] ata1: EH complete
Jul 26 14:08:51 krivedko kernel: [ 451.985588] res
51/40:00:29:bd:11/00:00:00:00:00/e0 Emask 0x9 (media error)
Jul 26 14:08:51 krivedko kernel: [ 452.002988] ata1.00: configured for
UDMA/133
Jul 26 14:08:51 krivedko kernel: [ 452.002988] ata1: EH complete
Jul 26 14:09:09 krivedko kernel: [ 470.825132] res
51/40:00:3a:bd:11/00:00:00:00:00/e0 Emask 0x9 (media error)
Jul 26 14:09:09 krivedko kernel: [ 470.850538] ata1.00: configured for
UDMA/133
Jul 26 14:09:09 krivedko kernel: [ 470.850538] ata1: EH complete
Jul 26 14:09:15 krivedko kernel: [ 477.031111] res
51/40:00:28:bd:11/00:00:00:00:00/e0 Emask 0x9 (media error)
Jul 26 14:09:15 krivedko kernel: [ 477.055279] ata1.00: configured for
UDMA/133
Jul 26 14:09:15 krivedko kernel: [ 477.055319] sd 0:0:0:0: [sda]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
Jul 26 14:09:15 krivedko kernel: [ 477.055326] sd 0:0:0:0: [sda] Sense
Key : Medium Error [current] [descriptor]
Jul 26 14:09:15 krivedko kernel: [ 477.055333] Descriptor sense data
with sense descriptors (in hex):
Jul 26 14:09:15 krivedko kernel: [ 477.055336] 72 03 11 04 00
00 00 0c 00 0a 80 00 00 00 00 00
Jul 26 14:09:15 krivedko kernel: [ 477.055345] 00 11 bd 28
Jul 26 14:09:15 krivedko kernel: [ 477.055349] sd 0:0:0:0: [sda] Add.
Sense: Unrecovered read error - auto reallocate failed
Jul 26 14:09:15 krivedko kernel: [ 477.055391] ata1: EH complete
Jul 26 14:09:16 krivedko kernel: [ 477.914384] sd 0:0:0:0: [sda]
781422768 512-byte hardware sectors (400088 MB)
Jul 26 14:09:16 krivedko kernel: [ 477.921757] sd 0:0:0:0: [sda] Write
Protect is off
Jul 26 14:09:16 krivedko kernel: [ 477.935832] sd 0:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 26 14:09:16 krivedko kernel: [ 477.951291] sd 0:0:0:0: [sda]
781422768 512-byte hardware sectors (400088 MB)
Jul 26 14:09:16 krivedko kernel: [ 477.959173] sd 0:0:0:0: [sda] Write
Protect is off
Jul 26 14:09:16 krivedko kernel: [ 477.959341] sd 0:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 26 14:09:21 krivedko kernel: [ 483.013276] res
51/40:00:29:bd:11/00:00:00:00:00/e0 Emask 0x9 (media error)
Jul 26 14:09:21 krivedko kernel: [ 483.037236] ata1.00: configured for
UDMA/133
Jul 26 14:09:21 krivedko kernel: [ 483.037272] ata1: EH complete
Jul 26 14:09:25 krivedko kernel: [ 487.554462] sd 0:0:0:0: [sda]
781422768 512-byte hardware sectors (400088 MB)
Jul 26 14:09:25 krivedko kernel: [ 487.554462] sd 0:0:0:0: [sda] Write
Protect is off
Jul 26 14:09:27 krivedko kernel: [ 489.619301] sd 0:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 26 14:10:05 krivedko kernel: [ 528.592798] res
40/00:00:29:bd:11/00:00:00:00:00/e0 Emask 0x4 (timeout)
Jul 26 14:10:10 krivedko kernel: [ 533.807082] ata1: port is slow to
respond, please be patient (Status 0xd0)
Jul 26 14:10:15 krivedko kernel: [ 538.853422] ata1: soft resetting link
Jul 26 14:10:16 krivedko kernel: [ 539.073191] ata1.00: configured for
UDMA/133
Jul 26 14:10:16 krivedko kernel: [ 539.073191] ata1: EH complete
Jul 26 14:10:46 krivedko kernel: [ 569.091792] res
40/00:00:29:bd:11/00:00:00:00:00/e0 Emask 0x4 (timeout)
Jul 26 14:10:51 krivedko kernel: [ 574.122656] ata1: port is slow to
respond, please be patient (Status 0xd0)
Jul 26 14:10:56 krivedko kernel: [ 579.077270] ata1: soft resetting link
Jul 26 14:10:56 krivedko kernel: [ 579.278982] ata1.00: configured for
UDMA/133
Jul 26 14:10:56 krivedko kernel: [ 579.278982] ata1: EH complete
Jul 26 14:11:26 krivedko kernel: [ 609.329029] res
40/00:00:29:bd:11/00:00:00:00:00/e0 Emask 0x4 (timeout)
Jul 26 14:11:31 krivedko kernel: [ 614.476289] ata1: port is slow to
respond, please be patient (Status 0xd0)
Jul 26 14:11:36 krivedko kernel: [ 619.571684] ata1: soft resetting link
Jul 26 14:11:36 krivedko kernel: [ 619.777493] ata1.00: configured for
UDMA/133
Jul 26 14:11:36 krivedko kernel: [ 619.777493] ata1: EH complete
Jul 26 14:11:40 krivedko kernel: [ 624.112825] res
51/40:00:50:8d:13/00:00:00:00:00/e0 Emask 0x9 (media error)
Jul 26 14:11:40 krivedko kernel: [ 624.128250] ata1.00: configured for
UDMA/133
Jul 26 14:11:40 krivedko kernel: [ 624.128250] ata1: EH complete
Jul 26 14:12:10 krivedko kernel: [ 654.468845] ata1.00: limiting speed
to UDMA/100:PIO4
Jul 26 14:12:10 krivedko kernel: [ 654.468845] res
40/00:00:50:8d:13/00:00:00:00:00/e0 Emask 0x4 (timeout)
Jul 26 14:12:16 krivedko kernel: [ 659.700271] ata1: port is slow to
respond, please be patient (Status 0xd0)
Jul 26 14:12:20 krivedko kernel: [ 665.000370] ata1: soft resetting link
Jul 26 14:12:51 krivedko kernel: [ 697.279758] ata1.00: qc timeout (cmd
0xec)
Jul 26 14:12:51 krivedko kernel: [ 697.279758] ata1.00: failed to
IDENTIFY (I/O error, err_mask=0x4)
Jul 26 14:12:51 krivedko kernel: [ 697.279758] ata1: failed to recover
some devices, retrying in 5 secs
Jul 26 14:13:01 krivedko kernel: [ 707.450962] ata1: port is slow to
respond, please be patient (Status 0xd0)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
