* Jurko Gospodnetić: " Re: Packaging of suds-jurko (was: suds)" (Thu, 03 Jul 2014 11:32:28 +0200):
Hi Jurko, > On 3.7.2014. 0:07, Mathias Behrle wrote: > >> My epydocs experience is *very* rusty. How hard would it be to covert the > >> docs to Sphinx-consumable reST? Clearly, that's the state of the art in > >> Python documentation these days. > > > > That was my initial thought, too. But then I supposed, that Jurko probably > > wanted to remain as near to the origin as possible in case his project > > would be re-merged. But at a second glance I think, that the migration of > > docs could also merged back as an improvement. > > > > Any thoughts, Jurko? > > I personally have no experience with epydoc and only some slight > experience with Sphinx, and don't really care one way or the other at > this point which one gets used. Since Sphinx is the de-facto standard > today - I'd like to port the docs to Sphinx, but that can happen at a > later time as well. Completely agreed. > A plan that sounds reasonable to me: > > Phase 1. > - get the current docs building as they stand now - whatever takes > the least effort > - doc sources & infrastructure stored in the project's main version > control repository > - a build system that can generate the docs in html/pdf/txt/whatever > format > > Phase 2. > - generated release docs included in the published distributions, > e.g. uploaded together with the release packages onto PyPI & BitBucket > - find out where the original suds project docs are kept, e.g. wiki > at fedorahosted.org, generated code-level docs at > http://jortel.fedorapeople.org/suds/doc > - a distribution system that can keep an up-to-date version readily > available in a public location, e.g. on https://readthedocs.org or the > same site where the original project is hosted, possibly replacing the > original project's docs > > Phase 3. > - port the docs to Sphinx > > Since the original project already has publicly available docs, I'd > be fine with replacing the original suds project after phase 2. > > If later phases are something that can be integrated 'at no cost' > into earlier ones, I'm all for it, but I don't see it as a strict > requirement. > > Some more thoughts on the scheduling: > - phase 1 should not take much time, assuming the original project > did have that automated somehow > - if the original project had only a manually maintained WIKI as its > basic docs - I'll have to see what to do about that as I really would > not like a separate project setup like that > - phase 2 might be tricky - I think readthedocs.org does not work > with epydoc, but only sphinx so unless we manage to take over the > original project's hosting locations it might be necessary to go the > sphinx route earlier - essentially - more research is required :-) > - as for phase 3 - the original project's autogenerated API docs > would need to me transformed so they are generated using some sphinx plugin > - suds does not have a terribly huge code-base so I guess any source > code formatting/markup changes can be done in a full day or two > > I can do the legwork, go through the docs and update as needed but > I'd rather not have such a potentially long-lasting task be a > requirement for something with a deadline and constantly have that on my > conscience. My day-job can easily take me away from suds for weeks at a > time. :-) > > And I really really really would not like to have to go through all > the docstrings and update their markup more than once. :-) My personal approach after a short glance to the existing documentation would be: - Release now after renaming the project without the docs (the existing documentation of suds is still existing on the web and should be roughly enough at this very moment). - Convert the available docs immediately to Sphinx, which AFAIS would mean - Get the wiki page from the fedora wiki [1], which is in mediawiki format, give it some love and convert it to sphinx. I attached the export of this page to this mail. - Convert the docstrings to Sphinx format - Here I found most interesting this sed script [2]. - or alternatively use a translation mechanism of Sphinx to use the current docstrings [3]. - Add the documentation, when ready, to the project and publish on read-the-docs. Personally I would prefer to convert at once and to not invest time in work, that will be superseeded anyway. This sequence of steps seems to me the most effective way to get things done. HTH, Mathias [1] https://fedorahosted.org/suds/wiki/Documentation [2] http://www.tomaz.me/2013/09/28/migrating-from-epydoc-to-sphinx-style-docstrings-using-sed-and-some-command-line-fu.html [3] http://stackoverflow.com/questions/10012741/automated-way-to-switch-from-epydocs-docstring-formatting-to-sphinx-docstring-f -- Mathias Behrle PGP/GnuPG key availabable from any keyserver, ID: 0x8405BBF6
[[PageOutline]]
== OVERVIEW ==
The ''Suds'' web services client is a lightweight soap-based client for python
the is licensed under LGPL.
Basic features:
* No class generation
* Provides an object-like API.
* Reads wsdl at runtime for encoding/decoding
* Provides for the following SOAP (style) binding/encoding:
* Document/Literal
* RPC/Literal
* RPC/Encoded (section 5)
The goal of suds is to present an RPC-''like'' interface into soap-based web
services. This means that in most cases, users do not
need to be concerned with the complexities of the WSDL and referenced schemas.
Regardless of which soap message style is specified, the
signature of the service methods remain the same. Uses that do examine the
WSDL will notice that even with the ''document'' soap message
style, the signature of each method resembles an RPC. The method signature
contains the contents of the ''document'' defined for the message
instead of the document itself.
The primary interface into the library is the
[http://jortel.fedorapeople.org/suds/doc/suds.client.Client-class.html Client]
object. It provides
methods for configuring the library and (2) sub-namespaces defined below. When
the [http://jortel.fedorapeople.org/suds/doc/suds.client.Client-class.html
Client]
is created, it processes the wsdl and referenced schema(s). From this
information, it derives a representation of this information which is used to
provide the user with a ''service description'' and for message/reply
processing.
== LOGGING ==
The ''suds'' package use the Python standard lib logging package:
all messages are at level DEBUG or ERROR.
To register a console handler you can use basicConfig:
{{{
#!python
import logging
logging.basicConfig(level=logging.INFO)
}}}
Once the console handler is configured, the user can enable module
specific debugging doing the following:
logging.getLogger(<desired package>).setLevel(logging.<desired-level>)
A common example (show sent/received soap messages):
{{{
#!python
logging.getLogger('suds.client').setLevel(logging.DEBUG)
}}}
Suggested modules for debugging:
''suds.client''::
Set the logging level to ''DEBUG'' on this module to see soap messages (in
& out) and http headers.
''suds.transport''::
Set the logging level to ''DEBUG'' on this module to see more details about
soap messages (in & out) and http headers.
''suds.xsd.schema''::
Set the logging level to ''DEBUG'' on this module to see digestion of the
schema(s).
''suds.wsdl''::
Set the logging level to ''DEBUG'' on this module to see digestion WSDL.
== BASIC USAGE ==
Version: API^3^
The ''suds''
[http://jortel.fedorapeople.org/suds/doc/suds.client.Client-class.html Client]
class provides a consolidated API for consuming
web services. The object contains (2) sub-namespaces:
__service__::
The [http://jortel.fedorapeople.org/suds/doc/suds.client.Service-class.html
service] namespace provides a proxy for the consumed service. This object
is used to invoke operations (methods) provided by the service endpoint.
__factory__::
The [http://jortel.fedorapeople.org/suds/doc/suds.client.Factory-class.html
factory] namespace provides a factory that may be used to create instances
of objects and types defined in the WSDL.
You will need to know the url for WSDL for each service used. Simply create
a client for that service as follows:
{{{
#!python
from suds.client import Client
url = 'http://localhost:7080/webservices/WebServiceTestBean?wsdl'
client = Client(url)
}}}
You can inspect service object with: {{{__str()__}}} as follows to get a list of
methods provide by the service:
{{{
#!python
print client
}}}
{{{
Suds - version: 0.3.3 build: (beta) R397-20081121
Service (WebServiceTestBeanService) tns="http://test.server.enterprise.rhq.org/";
Prefixes (1):
ns0 = "http://test.server.enterprise.rhq.org/";
Ports (1):
(Soap)
Methods:
addPerson(Person person, )
echo(xs:string arg0, )
getList(xs:string str, xs:int length, )
getPercentBodyFat(xs:string name, xs:int height, xs:int weight)
getPersonByName(Name name, )
hello()
testExceptions()
testListArg(xs:string[] list, )
testVoid()
updatePerson(AnotherPerson person, name name, )
Types (23):
Person
Name
Phone
AnotherPerson
}}}
'''note:''' See example of service with multiple ports below.
The sample ouput lists that the service named
''{{{WebServiceTestBeanService}}}''
has methods such as getPercentBodyFat() and addPerson().
==== Simple Arguments ====
Let's start with the simple example. The getPercentBodyFat() method
has the signature of getPercentBodyFat(''xs:string'' name, ''xs:int'' height,
''xs:int'' weight). In this case, the parameters are ''simple'' types. That
is, they
not objects. This method would be invoked as follows:
{{{
#!python
result = client.service.getPercentBodyFat('jeff', 68, 170)
print result
}}}
You have 21% body fat.
{{{
#!python
result = client.service.getPercentBodyFat(name='jeff', height=68, weight=170)
print result
}}}
You have 21% body fat.
{{{
#!python
d = dict(name='jeff', height=68, weight=170)
result = client.service.getPercentBodyFat(**d)
print result
}}}
{{{
You have 21% body fat.
}}}
==== Complex Arguments ====
The addPerson() method takes a ''person'' argument of type: ''Person'' and has
a signature of:
addPerson(''Person'' person, ) where parameter type is printed followed by it's
name. There is a type (or class)
named 'person' which is coincidentally the same name as the argument. Or in
the case of getPercentBodyFat()
the parameters are __string__ of type xs:string and __integer__ of type xs:int.
So, to create a ''Person'' object to pass as an argument we need to get a
person argument
using the ''factory'' sub-namespace as follows:
{{{
#!python
person = client.factory.create('Person')
print person
}}}
{{{
(Person)=
{
phone = []
age = NONE
name(Name) =
{
last = NONE
first = NONE
}
}
}}}
As you can see, the object is created as defined by the WSDL. The list of phone
number is empty so we'll have to create a ''Phone'' object:
{{{
#!python
phone = client.factory.create('Phone')
phone.npa = 202
phone.nxx = 555
phone.number = 1212
}}}
... and the name (Name object) and age need to be set and we need to create a
name object first:
{{{
#!python
name = client.factory.create('Name')
name.first = 'Elmer'
name.last = 'Fudd'
}}}
Now, let's set the properties of our ''Person'' object
{{{
#!python
person.name = name
person.age = 35
person.phone = [phone]
}}}
or
{{{
#!python
person.phone.append(phone)
}}}
... and invoke our method named addPerson() as follows:
{{{
#!python
try:
person_added = client.service.addPerson(person)
except WebFault, e:
print e
}}}
It's that easy.
The ability to use python ''dict'' to represent complex objects was
'''re-introduced in 0.3.8'''. However, this is not the preferred method
because it may lead to passing incomplete objects. Also, this approach has a
significant limitation. Users may __not__ use python
''dict'' for complex objects when they are subclasses (or extensions) of types
defined in the wsdl/schema. In other words, if the schema
defines a type to be an ''Animal'' and you wish to pass a ''Dog'' (assumes Dog
''isa'' Animal), you may __not__ use a ''dict'' to represent
the dog. In this case, suds needs to set the xsi:type="Dog" but cannot because
the python ''dict'' does not provide enough information
to indicate that it is a ''Dog'' not an ''Animal''. Most likely, the server
will reject the request and indicate that it cannot instantiate a abstract
''Animal''.
==== Complex Arguments Using Python (dict) ====
'''Note:''' version 0.3.8+
Just like the factory example, let's assume the addPerson() method takes a
''person'' argument of type: ''Person''.
So, to create a ''Person'' object to pass as an argument we need to get a
person object and we can do so by
creating a simple python ''dict''.
{{{
#!python
person = {}
}}}
According to the WSDL we know that the Person contains a list of Phone
objects so we'll need ''dict''s for them as well.
{{{
#!python
phone = {
'npa':202,
'nxx':555,
'number':1212,
}
}}}
... and the name (Name object) and age need to be set and we need to create a
name object first:
{{{
#!python
name = {
'first':'Elmer',
'last':'Fudd'
}
}}}
Now, let's set the properties of our ''Person'' object
{{{
#!python
person['name'] = name
person['age'] = 35
person['phone'] = [phone,]
}}}
... and invoke our method named addPerson() as follows:
{{{
#!python
try:
person_added = client.service.addPerson(person)
except WebFault, e:
print e
}}}
=== FAULTS ===
The Client can be configured to throw web faults as {{{WebFault}}} or
to return a tuple (<status>, <returned-value>) instead as follows:
{{{
#!python
client = client(url, faults=False)
result = client.service.addPerson(person)
print result
}}}
{{{
( 200, person ...)
}}}
=== OPTIONS ===
The ''suds''
[http://jortel.fedorapeople.org/suds/doc/suds.client.Client-class.html client]
has many that may be used to
control the behavior of the library. Some are
[http://jortel.fedorapeople.org/suds/doc/suds.options.Options-class.html
general options] and
others are
[http://jortel.fedorapeople.org/suds/doc/suds.transport.options.Options-class.html
transport options]. Although, the options objects are
exposed, the preferred and supported way to set/unset options is through:
* The [http://jortel.fedorapeople.org/suds/doc/suds.client.Client-class.html
Client] constructor
* The [http://jortel.fedorapeople.org/suds/doc/suds.client.Client-class.html
Client].set_options()
* The
[http://jortel.fedorapeople.org/suds/doc/suds.transport.Transport-class.html
Transport] constructor(s).
They are as follows:
''faults''::
Controls web fault behavior.
''service''::
Controls the default service name for multi-service wsdls.
''port''::
Controls the default service port for multi-port services.
''location''::
This overrides the service port address ''URL'' defined in the WSDL.
''proxy''::
Controls http proxy settings.
''transport''::
Controls the ''plugin'' web
[http://jortel.fedorapeople.org/suds/doc/suds.transport.Transport-class.html
transport].
''cache''::
Provides caching of documents and objects related to loading the WSDL.
Soap envelopes are never cached.
''cachingpolicy''::
The caching policy, determines how data is cached. The default is 0.
''version 0.4+''
* 0 = XML documents such as WSDL & XSD.
* 1 = WSDL object graph.
''headers''::
Provides for ''extra'' http headers.
''soapheaders''::
Provides for soap headers.
''wsse''::
Provides for WS-Security object.
''{{{__inject}}}''::
Controls message/reply message injection.
''doctor''::
The schema ''doctor'' specifies an object used to fix broken schema(s).
''xstq''::
The '''X'''ML '''s'''chema '''t'''ype '''q'''ualified flag indicates that
''xsi:type'' attribute __values__ should be qualified by namespace.
''prefixes''::
Elements of the soap message should be qualified (when needed) using XML
prefixes as opposed to xmlns="" syntax.
''timeout''::
The URL connection timeout (seconds) default=90.
''retxml''::
Flag that causes the I{raw} soap envelope to be returned instead
of the python object graph.
''autoblend''::
Flag that ensures that the schema(s) defined within the WSDL import each
other.
''nosend''::
Flag that causes suds to generate the soap envelope but not send it.
Instead, a
[http://jortel.fedorapeople.org/suds/doc/suds.client.RequestContext-class.html
RequestContext] is returned Default: False.
== ENUMERATIONS ==
Enumerations are handled as follows:
Let's say the wsdl defines the following enumeration:
{{{
#!xml
<xs:simpleType name="resourceCategory">
<xs:restriction base="xs:string">
<xs:enumeration value="PLATFORM"/>
<xs:enumeration value="SERVER"/>
<xs:enumeration value="SERVICE"/>
</xs:restriction>
</xs:simpleType>
}}}
The client can instantiate the enumeration so it can be
used. Misspelled references to elements of the ''enum'' will raise a
{{{AttrError}}} exception as:
{{{
#!python
resourceCategory = client.factory.create('resourceCategory')
client.service.getResourceByCategory(resourceCategory.PLATFORM)
}}}
== FACTORY ==
The [http://jortel.fedorapeople.org/suds/doc/suds.client.Factory-class.html
factory] is used
to create complex objects defined the the wsdl/schema. This is __not__
necessary for parameters
or types that are specified as ''simple'' types such as xs:string, xs:int, etc
...
The create() method should always be used becuase it returns objects that
already
have the proper structure and schema-type information. Since xsd supports
nested type
definition, so does create() using the (.) dot notation. For example suppose
the (Name)
type was not defined as a top level "named" type but rather defined within the
(Person) type.
In this case creating a (Name) object would have to be quanified by it's
parent's name using the
dot notation as follows:
{{{
#!python
name = client.factory.create('Person.Name')
}}}
If the type is in the same namespace as the wsdl (targetNamespace) then it may
be referenced
without any namespace qualification. If not, the type must be qualifed by
either a namespace
prefix such as:
{{{
#!python
name = client.factory.create('ns0:Person')
}}}
Or, the name can be fully qualified by the namespace itself using the full
qualification syntax as (as of 0.2.6):
{{{
#!python
name = client.factory.create('{http://test.server.enterprise.rhq.org/}person')
}}}
Qualified names can only be used for the '''first''' part of the name, when
using (.) dot
notation to specify a path.
== SERVICES WITH MULTIPLE PORTS ==
Some services are defined with multiple ports as:
{{{
#!xml
<wsdl:service name="BLZService">
<wsdl:port name="soap" binding="tns:BLZServiceSOAP11Binding">
<soap:address
location="http://www.thomas-bayer.com:80/axis2/services/BLZService"/>
</wsdl:port>
<wsdl:port name="soap12" binding="tns:BLZServiceSOAP12Binding">
<soap12:address
location="http://www.thomas-bayer.com:80/axis2/services/BLZService"/>
</wsdl:service>
}}}
And are reported by suds as:
{{{
#!python
url = 'http://www.thomas-bayer.com/axis2/services/BLZService?wsdl'
client = Client(url)
print client
}}}
{{{
Suds - version: 0.3.3 build: (beta) R397-20081121
Service (BLZService) tns="http://thomas-bayer.com/blz/";
Prefixes (1)
ns0 = "http://thomas-bayer.com/blz/";
Ports (2):
(soap)
Methods (1):
getBank(xs:string blz, )
(soap12)
Methods (1):
getBank(xs:string blz, )
Types (5):
getBankType
getBankResponseType
getBankType
getBankResponseType
detailsType
}}}
This example only has (1) method defined for each port but it could very likely
have
may methods defined. Suds does not require the method invocation to be qualifed
(as shown above) by the port as:
{{{
#!python
client.service.<port>.getBank()
}}}
unless the user wants to specify a particular port. In most cases, the server
will
work properly with any of the soap ports. However, if you want to invoke the
getBank() method on this service the user may qualify the method name with the
port.
There are (2) ways to do this:
* Select a default port using the ''port''
[http://jortel.fedorapeople.org/suds/doc/suds.options.Options-class.html
option] before invoking the method as:
{{{
#!python
client.set_options(port='soap')
client.service.getBank()
}}}
* fully qualify the method as:
{{{
#!python
client.service.soap.getBank()
}}}
'''**'''After r551 version 0.3.7, this changes some to support
multiple-services within (1) WSDL as follows:
This example only has (1) method defined for each port but it could very likely
have
may methods defined. Suds does not require the method invocation to be qualifed
(as shown above) by the port as:
{{{
#!python
client.service[port].getBank()
}}}
unless the user wants to specify a particular port. In most cases, the server
will
work properly with any of the soap ports. However, if you want to invoke the
getBank() method on this service the user may qualify the method name with the
port.
The ''port'' may be subscripted either by name (string) or index(int).
There are many ways to do this:
* Select a default port using the ''port''
[http://jortel.fedorapeople.org/suds/doc/suds.options.Options-class.html
option] before invoking the method as:
{{{
#!python
client.set_options(port='soap')
client.service.getBank()
}}}
* fully qualify the method using the port ''name'' as:
{{{
#!python
client.service['soap'].getBank()
}}}
* fully qualify the method using the port ''index'' as:
{{{
#!python
client.service[0].getBank()
}}}
== WSDL WITH MULTIPLE SERVICES & MULTIPLE PORTS ==
version: 0.3.7+
Some WSDLs define multiple services which may (or may not) be defined with
multiple ports as:
{{{
#!xml
<wsdl:service name="BLZService">
<wsdl:port name="soap" binding="tns:BLZServiceSOAP11Binding">
<soap:address
location="http://www.thomas-bayer.com:80/axis2/services/BLZService"/>
</wsdl:port>
<wsdl:port name="soap12" binding="tns:BLZServiceSOAP12Binding">
<soap12:address
location="http://www.thomas-bayer.com:80/axis2/services/BLZService"/>
</wsdl:service>
<wsdl:service name="OtherBLZService">
<wsdl:port name="soap" binding="tns:OtherBLZServiceSOAP11Binding">
<soap:address
location="http://www.thomas-bayer.com:80/axis2/services/OtherBLZService"/>
</wsdl:port>
<wsdl:port name="soap12" binding="tns:OtherBLZServiceSOAP12Binding">
<soap12:address
location="http://www.thomas-bayer.com:80/axis2/services/OtherBLZService"/>
</wsdl:service>
}}}
And are reported by suds as:
{{{
#!python
url = 'http://www.thomas-bayer.com/axis2/services/BLZService?wsdl'
client = Client(url)
print client
}}}
{{{
Suds - version: 0.3.7 build: (beta) R550-20090820
Service (BLZService) tns="http://thomas-bayer.com/blz/";
Prefixes (1)
ns0 = "http://thomas-bayer.com/blz/";
Ports (2):
(soap)
Methods (1):
getBank(xs:string blz, )
(soap12)
Methods (1):
getBank(xs:string blz, )
Types (5):
getBankType
getBankResponseType
getBankType
getBankResponseType
detailsType
Service (OtherBLZService) tns="http://thomas-bayer.com/blz/";
Prefixes (1)
ns0 = "http://thomas-bayer.com/blz/";
Ports (2):
(soap)
Methods (1):
getBank(xs:string blz, )
(soap12)
Methods (1):
getBank(xs:string blz, )
Types (5):
getBankType
getBankResponseType
getBankType
getBankResponseType
detailsType
}}}
This example only has (1) method defined for each port but it could very likely
have
may methods defined. Suds does __not__ require the method invocation to be
qualifed
(as shown above) by the service and/or port as:
{{{
#!python
client.service[service][port].getBank()
}}}
unless the user wants to specify a particular service and/or port. In most
cases, the server will
work properly with any of the soap ports. However, if you want to invoke the
getBank() method on the ''{{{OtherBLZService}}}'' service the user may qualify
the method name with the service and/or port.
If not specified, suds will default the service to the 1st server defined in
the WSDL and default to the 1st port within each service.
Also, when a WSDL defines (1) services, the [] subscript is applied to the port
selection. This may be a little confusing because
the syntax for subscripting can seem inconsistent.
Both the ''service'' __and__ ''port'' may be subscripted either by name
(string) or index (int).
There are many ways to do this:
* Select a default service using the ''service'' option and default port using
''port'' option
[http://jortel.fedorapeople.org/suds/doc/suds.options.Options-class.html
option] before invoking the method as:
{{{
#!python
client.set_options(service='OtherBLZService', port='soap')
client.service.getBank()
}}}
* method qualified by ''service'' and ''port'' as:
{{{
#!python
client.service['OtherBLZService']['soap'].getBank()
}}}
* method qualified by ''service'' and ''port'' using indexes as:
{{{
#!python
client.service[1][0].getBank()
}}}
* method qualified by ''service'' (by name) only as:
{{{
#!python
client.service['OtherBLZService'].getBank()
}}}
* method qualified by ''service'' (by index) only as:
{{{
#!python
client.service[1].getBank()
}}}
Note, that if a WSDL defines more then one service, you __must__ qualify the
''service'' via
[http://jortel.fedorapeople.org/suds/doc/suds.options.Options-class.html
option] or by using the
subscripting syntax in order to specify the ''port'' using the subscript syntax.
== SOAP HEADERS ==
SOAP headers may be passed during the service invocation by using the
''soapheaders''
[http://jortel.fedorapeople.org/suds/doc/suds.options.Options-class.html
option] as follows:
{{{
#!python
client = client(url)
token = client.factory.create('AuthToken')
token.username = 'Elvis'
token.password = 'TheKing'
client.set_options(soapheaders=token)
result = client.service.addPerson(person)
}}}
OR
{{{
#!python
client = client(url)
userid = client.factory.create('Auth.UserID')
userid.set('Elvis')
password = client.factory.create('Auth.Password')
password.set('TheKing')
client.set_options(soapheaders=(userid,password))
result = client.service.addPerson(person)
}}}
OR
{{{
#!python
client = client(url)
userid = 'Elmer'
passwd = 'Fudd'
client.set_options(soapheaders=(userid,password))
result = client.service.addPerson(person)
}}}
The ''soapheaders'' option may also be assigned a dictionary for those
cases when optional headers are specified and users don't want to pass None
place holders.
This works much like the method parameters. Eg:
{{{
#!python
client = client(url)
myheaders = dict(userid='Elmer', passwd='Fudd')
client.set_options(soapheaders=myheaders)
result = client.service.addPerson(person)
}}}
Passing ''soapheaders'' by keyword (dict) is available in 0.3.4 (r442) and
later.
== CUSTOM SOAP HEADERS ==
Custom SOAP headers may be passed during the service invocation by using the
''soapheaders''
[http://jortel.fedorapeople.org/suds/doc/suds.options.Options-class.html
option]. A ''custom'' soap header is defined
as a header that is required by the service by __not__ defined in the wsdl.
Thus, the ''easy'' method of passing soap headers already
described cannot be used. This is done by constructing and passing an
[http://jortel.fedorapeople.org/suds/doc/suds.sax.element.Element-class.html
Element]
or collection of
[http://jortel.fedorapeople.org/suds/doc/suds.sax.element.Element-class.html
Elements] as follows:
{{{
#!python
from suds.sax.element import Element
client = client(url)
ssnns = ('ssn', 'http://namespaces/sessionid')
ssn = Element('SessionID', ns=ssnns).setText('123')
client.set_options(soapheaders=ssn)
result = client.service.addPerson(person)
}}}
Do __not__ try to pass the header as an XML ''string'' such as:
{{{
#!python
client = client(url)
ssn = '<ssn:SessionID>123</ssn:SessionID>'
client.set_options(soapheaders=ssn)
result = client.service.addPerson(person)
}}}
It will not work because:
1. Only
[http://jortel.fedorapeople.org/suds/doc/suds.sax.element.Element-class.html
Elements] are processed as ''custom'' headers.
1. The XML string would be escaped as
<ssn:SessionID>123</ssn:SessionID> anyway.
'''*Notes:'''
1. Passing single
[http://jortel.fedorapeople.org/suds/doc/suds.sax.element.Element-class.html
Elements] as soap headers fixed in Ticket #232 (r533) and will be released on
0.3.7.
1. Reusing this
[http://jortel.fedorapeople.org/suds/doc/suds.sax.element.Element-class.html
Element] in subsequent calls fixed in Ticket #233 (r533) and will be released
on 0.3.7.
== WS-SECURITY ==
As of r452 / 0.3.4 (beta) to provide basic ws-security with
''{{{UsernameToken}}}'' with ''clear-text'' password (no digest).
{{{
#!python
from suds.wsse import *
security = Security()
token = UsernameToken('myusername', 'mypassword')
security.tokens.append(token)
client.set_options(wsse=security)
}}}
or, if the ''Nonce'' and ''Create'' elements are needed, they can be generated
and set as follows:
{{{
#!python
from suds.wsse import *
security = Security()
token = UsernameToken('myusername', 'mypassword')
token.setnonce()
token.setcreated()
security.tokens.append(token)
client.set_options(wsse=security)
}}}
but, if you want to manually set the ''Nonce'' and/or ''Created'', you may do
as follows:
{{{
#!python
from suds.wsse import *
security = Security()
token = UsernameToken('myusername', 'mypassword')
token.setnonce('MyNonceString...')
token.setcreated(datetime.now())
security.tokens.append(token)
client.set_options(wsse=security)
}}}
== MULTI-DOCUMENT ''Docuemnt/Literal'' ==
In most cases, services defined using the document/literal SOAP binding style
will define a single document as the message payload. The <message/> will only
have (1) <part/> which references an <element/> in the schema. In this case,
suds
presents a RPC view of that method by displaying the method signature as the
contents (nodes) of the document.
Eg:
{{{
#!xml
<schema>
...
<xs:element name="Foo" type = "tns:Foo"/>
<xs:complexType name="Foo">
<xs:sequence>
<xs:element name="name" type="xs:string"/>
<xs:element name="age" type="xs:int"/>
</xs:sequence>
</xs:complexType>
...
</schema>
<definitions>
...
<message name="FooMessage">
<part name="parameters" element="Foo">
</message>
...
</definitions>
}}}
Suds will report the method ''foo'' signature as:
{{{
foo(xs:string name, xs:int age,)
}}}
This provides an RPC feel to the document/literal soap binding style.
Now, if the wsdl defines:
{{{
#!xml
<schema>
...
<xs:element name="Foo" type = "tns:Foo"/>
<xs:element name="Bar" type = "xs:string"/>
<xs:complexType name="Foo">
<xs:sequence>
<xs:element name="name" type="xs:string"/>
<xs:element name="age" type="xs:int"/>
</xs:sequence>
</xs:complexType>
...
</schema>
<definitions>
...
<message name="FooMessage">
<part name="foo" element="Foo">
<part name="bar" element="Bar">
</message>
...
</definitions>
}}}
Suds will be forced to report the method ''foo'' signature as:
{{{
foo(Foo foo, xs:int bar)
}}}
The message has (2) parts which defines that the message payload contains
(2) documents. In this case, suds must present a /Document/ view of the method.
== HTTP AUTHENTICATION ==
==== Basic ====
As of version 0.3.3 and ''newer'', ''basic'' HTTP authentication as defined by
[http://www.ietf.org/rfc/rfc2617.txt RFC-2617] can be done as follows:
{{{
#!python
client = Client(url, username='elmer', password='fudd')
}}}
Authentication is provided by the (default)
[http://jortel.fedorapeople.org/suds/doc/suds.transport.https.HttpAuthenticated-class.html
HttpAuthenticated] ''Transport''
class defined in the
[http://jortel.fedorapeople.org/suds/doc/suds.transport.http-module.html
transport.https] module that follows the challenge (http 401) / response
model defined in the RFC.
As of r537, ''0.3.7'' beta, a new ''Transport'' was added in the
[http://jortel.fedorapeople.org/suds/doc/suds.transport.http-module.html
transport.http] module that provides
http authentication for servers that don't follow the challenge/response model.
Rather, it sets the ''Authentication:''
http header on __all__ http requests. This transport can be used as follows:
{{{
#!python
from suds.transport.http import HttpAuthenticated
t = HttpAuthenticated(username='elmer', password='fudd')
client = Client(url, transport=t)
}}}
Or
{{{
#!python
from suds.transport.http import HttpAuthenticated
t = HttpAuthenticated()
client = Client(url, transport=t, username='elmer', password='fudd')
}}}
For version: '''0.3.3 and older ONLY''':
Revision 63+ (and release 0.1.8+) includes the migration from httplib to
urllib2 in the suds default
[http://jortel.fedorapeople.org/suds/doc/suds.transport.HttpTransport-class.html
transport]
which enables users to leverage all of the authentication features provided
by urllib2. For example basic HTTP authentication could be implemented
as follows:
{{{
#!python
myurl = 'http://localhost:7080/webservices/WebServiceTestBean?wsdl'
client = Client(myurl)
import urllib2
baseurl = 'http://localhost:7080/'
username = 'myuser'
password = 'mypassword'
passman = urllib2.HTTPPasswordMgrWithDefaultRealm()
passman.add_password(None, baseurl, username, password)
authhandler = urllib2.HTTPBasicAuthHandler(passman)
client.options.transport.urlopener = urllib2.build_opener(authhandler)
}}}
The suds default
[http://jortel.fedorapeople.org/suds/doc/suds.transport.HttpTransport-class.html
HTTP transport] uses urllib2.urlopen(), basic http authentication is handled
automatically if you create the transport's urlopener correctly and set the
urlopener.
==== Windows (NTLM) ====
As of 0.3.8, suds includes a
[http://jortel.fedorapeople.org/suds/doc/suds.transport.https.WindowsHttpAuthenticated-class.html
NTLM transport] based on urllib2.
This implementation requires ''users'' to install the
[http://code.google.com/p/python-ntlm/ python-ntlm]. It is __not__ packaged
with ''suds''.
To use this, simply do something like:
{{{
#!python
from suds.transport.https import WindowsHttpAuthenticated
ntlm = WindowsHttpAuthenticated(username='xx', password='xx')
client = Client(url, transport=ntlm)
}}}
== PROXIES ==
The suds default
[http://jortel.fedorapeople.org/suds/doc/suds.transport.HttpTransport-class.html
transport] handles proxies using urllib2.Request.set_proxy(). The proxy
options can be passed set using Client.set_options. The proxy
options must contain a dictionary where keys=protocols and values are
the hostname (or IP) and port of the proxy.
{{{
#!python
...
d = dict(http='host:80', https='host:443', ...)
client.set_options(proxy=d)
...
}}}
== MESSAGE INJECTION ''(Diagnostics/Testing)'' ==
The service API provides for message/reply injection.
To inject either a soap message to be sent or to inject a reply or fault to be
processed as if returned by the
soap server, simply specify the ''{{{__inject}}}'' keyword argument with a
value of a
dictionary containing either:
* ''msg'' = <message string>
* ''reply'' = <reply string>
* ''fault'' = <fault string>
when invoking the service. Eg:
Sending a ''raw'' soap message:
{{{
#!python
message = \
"""<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope>
<SOAP-ENV:Body>
...
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>"""
print client.service.test(__inject={'msg':message})
}}}
Injecting a response for testing:
{{{
#!python
reply = \
"""<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope>
<SOAP-ENV:Body>
...
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>"""
print client.service.test(__inject={'reply':reply})
}}}
== PERFORMANCE ==
As of 0.3.5 r473, suds provides some URL caching. By default, http get(s) such
as getting the WSDL and importing XSDs are
cached. The caching applies to URL such as those used to get the referenced
WSDLs and XSD schemas but does __not__ apply to
service method invocation as this would not make sense.
In 0.3.9, !FileCache was replaced with !ObjectCache.
The default ''cache'' is a
[http://jortel.fedorapeople.org/suds/doc/suds.cache.ObjectCache-class.html
ObjectCache] with an expiration of (1) day.
This duration may be adjusted as follows:
{{{
#!python
cache = client.options.cache
cache.setduration(days=10)
}}}
OR
{{{
#!python
cache.setduration(seconds=90)
}}}
The ''duration'' my be (months, weeks, days, hours, seconds ).
The default ''location'' (directory) is ''/tmp/suds'' so ''Windows'' users will
need to set the ''location'' to something that makes
sense on windows.
The cache is an
[http://jortel.fedorapeople.org/suds/doc/suds.options.Options-class.html
option] and can be set with any
kind of [http://jortel.fedorapeople.org/suds/doc/suds.cache.Cache-class.html
Cache] object or may be disabled by setting the option to ''None''.
So, uses may ''plug-in'' any kind of cache they want.
{{{
#!python
from suds.cache import Cache
class MyCache(Cache)
...
client.set_options(cache=MyCache())
}}}
To disable caching:
{{{
#!python
client.set_options(cache=None)
}}}
== FIXING BROKEN SCHEMA(s) ==
There are many cases where the schema(s) defined both within the WSDL or
imported are broken. The most common problem
is failure to import the follow proper import rules. That is, references are
made in one schema to named objects defined in another
schema without importing it. The
[http://jortel.fedorapeople.org/suds/doc/suds.xsd.doctor-module.html doctor]
module defines a
set of classes for ''mending'' broken schema(s).
=== Doctors ===
The [http://jortel.fedorapeople.org/suds/doc/suds.xsd.doctor.Doctor-class.html
Doctor] class provides the interface for classes
that provide this service. Once defined, the ''doctor'' can be specified using
the schema ''doctor'' as an
[http://jortel.fedorapeople.org/suds/doc/suds.options.Options-class.html
option] when creating the Client. Or, you can
use one of the stock ''doctors''
*
[http://jortel.fedorapeople.org/suds/doc/suds.xsd.doctor.ImportDoctor-class.html
ImportDoctor] - Used to fix ''import'' problems.
For example:
{{{
#!python
imp = Import('http://schemas.xmlsoap.org/soap/encoding/')
imp.filter.add('http://some/namespace/A')
imp.filter.add('http://some/namespace/B')
doctor = ImportDoctor(imp)
client = Client(url, doctor=doctor)
}}}
In this example, we've specified that the ''doctor'' should examine schema(s)
with a ''targetNamespace'' of {{{http://some/namespace/A or
http://some/namespace/B}}}
and ensure that the schema for the
{{{http://schemas.xmlsoap.org/soap/encoding/}}} is imported. If those
schema(s) do not have an <xs:import/> for those
namespaces, it is added.
For cases where the ''schemaLocation'' is not bound to the ''namespace'', the
[http://jortel.fedorapeople.org/suds/doc/suds.xsd.doctor.Import-class.html
Import]
can be created specifying the ''location'' has follows:
{{{
#!python
imp = Import('http://www.w3.org/2001/XMLSchema',
location='http://www.w3.org/2001/XMLSchema.xsd')
imp.filter.add('http://some/namespace/A')
imp.filter.add('http://some/namespace/B')
doctor = ImportDoctor(imp)
client = Client(url, doctor=doctor)
}}}
A commonly referenced schema (that is not imported) is the SOAP section 5
encoding schema. This can now be fixed
as follows:
{{{
#!python
imp = Import('http://schemas.xmlsoap.org/soap/encoding/')
imp.filter.add('http://some/namespace/A')
doctor = ImportDoctor(imp)
client = Client(url, doctor=doctor)
}}}
'''note:''' Available in r512+ and 0.3.6 ''beta''.
=== Binding Schema Locations (URL) to Namespaces ===
Some WSDL(s) schemas import as: <import
namespace="http://schemas.xmlsoap.org/soap/encoding/"/> without
schemaLocation="" and expect processor to use the namespace URI as the schema
location for the namespace. The specifications for processing <import/> leave
the resolution of the imported namespace to a schema to the descession of the
processor (in this case suds) when @schemaLocation is not specified. Suds
always looks within the WSDL for a schema but does not look outside unless:
* A schemaLocation is specified, or
* A static binding is specified using the following syntax:
{{{
#!python
from suds.xsd.sxbasic import Import
ns = 'http://schemas.xmlsoap.org/soap/encoding/'
location = 'http://schemas.xmlsoap.org/soap/encoding/'
Import.bind(ns, location)
}}}
Or, the shorthand (when location is the same as the namespace URI)
{{{
#!python
Import.bind(ns)
}}}
'''note:''' {{{http://schemas.xmlsoap.org/soap/encoding/'}}} automatically
''bound'' in 0.3.4 as of (r420).
== PLUGINS ==
New in 0.4 is a plugin facility. It is intended to be a general, more
extensible, mechanism for users to inspect/modify
suds while it is running. Today, there are two ''one-off'' ways to do this:
1. bindings.Binding.replyfilter - The reply text can be inspected & modified.
2. xsd.Doctor - The doctor ''option'' used to mend broken schemas.
The [http://jortel.fedorapeople.org/suds/doc/toc-suds.plugin-module.html
plugin] module provides a number of classes
but users really only need to be concerned with a few:
* The [http://jortel.fedorapeople.org/suds/doc/suds.plugin.Plugin-class.html
Plugin] class which defines the interface for user plugins
* The ''Context'' classes which are passed to the plugin.
The plugins are divided into (4) classes based on the ''tasks'' of the soap
client:
''Initialization'' ::
The client initialization task which is when the client has digested the
WSDL and associated XSD.
''Document Loading'' ::
The document loading task. This is when the client is loading WSDL & XSD
documents.
''Messaging'' ::
The messaging task is when the client is doing soap messaging as part of
method (operation) invocation.
==== !InitPlugin ====
The ''!InitPlugin'' currently has (1) hook:
''initialized()'' ::
Called after the client is initialized. The context contains the ''WSDL''
object.
==== !DocumentPlugin ====
The ''!DocumentPlugin'' currently has (2) hooks::
''loaded()'' ::
Called before parsing a ''WSDL'' or ''XSD'' document. The context contains
the url & document text.
''parsed()'' ::
Called after parsing a ''WSDL'' or ''XSD'' document. The context contains
the url & document ''root''.
==== !MessagePlugin ====
The ''!MessagePlugin'' currently has (5) hooks ::
''marshalled()''::
Provides the plugin with the opportunity to inspect/modify the envelope
'''Document''' __before__ it is sent.
''sending()'' ::
Provides the plugin with the opportunity to inspect/modify the message
'''text''' __before__ it is sent.
''received()'' ::
Provides the plugin with the opportunity to inspect/modify the received XML
'''text''' __before__ it is SAX parsed.
''parsed()'' ::
Provides the plugin with the opportunity to inspect/modify the sax parsed
DOM tree for the reply __before__ it is unmarshalled.
''unmarshalled()'' ::
Provides the plugin with the opportunity to inspect/modify the unmarshalled
reply __before__ it is returned to the caller.
General usage:
{{{
#!python
from suds.plugin import *
class MyPlugin(DocumentPlugin):
...
plugin = MyPlugin()
client = Client(url, plugins=[plugin])
}}}
Plugins need to override __only__ those methods (hooks) of interest - not all
of them. Exceptions are caught and logged.
Here is an example. Say I want to add some attributes to the document root
element in the soap envelope. Currently suds does
not provide a way to do this using the main API. Using a plugin much like the
schema doctor, we can do this.
Say our envelope is being generated by suds as:
{{{
<soapenv:Envelope>
<soapenv:Body>
<ns0:foo>
<name>Elmer Fudd</name>
<age>55</age>
</ns0:foo>
</soapenv:Body>
</soapenv:Envelope>
}}}
But what you need is:
{{{
<soapenv:Envelope>
<soapenv:Body>
<ns0:foo id="1234" version="2.0">
<name>Elmer Fudd</name>
<age>55</age>
</ns0:foo>
</soapenv:Body>
</soapenv:Envelope>
}}}
{{{
#!python
from suds.plugin import MessagePlugin
class MyPlugin(MessagePlugin):
def marshalled(self, context):
body = context.envelope.getChild('Body')
foo = body[0]
foo.set('id', '12345')
foo.set('version', '2.0')
client = Client(url, plugins=[MyPlugin()])
}}}
In the future, the ''Binding.replyfilter'' and ''doctor'' __option__ will
likely be deprecated. The
[http://jortel.fedorapeople.org/suds/doc/suds.xsd.doctor.ImportDoctor-class.html
ImportDoctor]
has been extended to implement the
[http://jortel.fedorapeople.org/suds/doc/suds.plugin.Plugin-class.html
Plugin].onLoad() API.
In doing this, we can treat the !ImportDoctor as a plugin:
{{{
#!python
imp = Import('http://www.w3.org/2001/XMLSchema')
imp.filter.add('http://webservices.serviceU.com/')
d = !ImportDoctor(imp)
client = Client(url, plugins=[d])
}}}
We can also replace our Binding.replyfilter() with a plugin as follows:
{{{
#!python
def myfilter(reply):
return reply[1:]
Binding.replyfilter = myfilter
# replace with:
class Filter(MessagePlugin):
def received(self, context):
reply = context.reply
context.reply = reply[1:]
client = Client(url, plugins=[Filter()])
}}}
== TECHNICAL (FYI) NOTES ==
* XML namespaces are represented as a tuple (prefix, URI).
The default namespace is (None,None).
* The suds.sax module was written becuase elementtree and other
python XML packages either: have a DOM API which is very unfriendly
or: (in the case of elementtree) do not deal with namespaces and
especially prefixes sufficiently.
* A qualified reference is a type that is referenced in the WSDL such as <tag
type="tns:Person/>
where the qualified reference is a tuple ('Person',
('tns','http://myservce/namespace'))
where the namespace is the 2nd part of the tuple. When a prefix is not
supplied as in
<tag type="Person/>, the namespace is the targetNamespace for the defining
fragment.
This ensures that all lookups and comparisons are fully qualified.
signature.asc
Description: PGP signature
