Hello Luigi, thank you for your feedback. Regarding your hints, I already tried ext 2, ext 3 and ext 4. :-) I was running DEBIAN 6 before, this mean the enviroment is setup in the right way. I can use AmigaOS 4.1, MOS and Debian 6 over a bootmenue.
So it is really no problem of the installation itself, something was changed and now the PEG is no more working. It seems that some parts of the base system could not be installed, but I cannot say which one… Is there no official who could be informed about this problem? Because the installation routines for the PEG are also in Debian 8 and as I wrote before everything is working fine up to 95%. If it was the best machine, why did you sold it? :-) Would be usefully now. :-) Best regards, Robert > Am 02.05.2015 um 02:39 schrieb Luigi Burdo <intermedi...@hotmail.com>: > > Last that i had been installed was debian wheezy 7.6 > install it without upgrading during installing ( dont install upgrade from > network during the installation procedures) . Remember to make the Swap and > the / partitions dont use ext 4 try with ext 2 fs because is more compatible > with old pegasos2 openfirmware. > > remember to make a boot partition where you will copy the kernle and the > intrd.img ... you can use that partion for boot loader of morphos and > amigaos 4 plus for start osx . > > I cant help moore because i dont have a peggy2 any more :-( ... one of the > best machine that i had > in my life. > > Luigi > CC: intermedi...@hotmail.com <mailto:intermedi...@hotmail.com>; > debian-powerpc@lists.debian.org <mailto:debian-powerpc@lists.debian.org> > From: a...@gmx.ch <mailto:a...@gmx.ch> > Subject: Re: Debian 8.0 PPC not working on Pegasos II G4 > Date: Sat, 2 May 2015 01:09:22 +0200 > To: herminio.hernande...@gmail.com <mailto:herminio.hernande...@gmail.com> > > Hello, > > I and also the other guys in our forum already tried to install 7.8, which > ends in the same problem like 8.0. Which version was running on your Peg-2? > > I only remember that 6.x was running fine. > > But it would be nice to find the problem, because the part with the > installation works fine up to 95%. > > MfG, Robert > Send from iPhone 5 > > > Am 01.05.2015 um 17:30 schrieb Herminio Hernandez Jr. > <herminio.hernande...@gmail.com <mailto:herminio.hernande...@gmail.com>>: > > Thanks for responding > > Sent from my iPhone > > On May 1, 2015, at 10:28 AM, Luigi Burdo <intermedi...@hotmail.com > <mailto:intermedi...@hotmail.com>> wrote: > > Guys i had this machine with radeon radeon 9000 and / 9800pro > and was working good with debian wheezy 7.x . > i sold it in september 2014. > the machine is one of the best powerpc platform that i had ...phase 5 after > bplan after genensis > was make great hardware. > > i suggest the guys to install wheezy that was tested and working by me in > person. > > > Luigi > > > On 01/05/15 16:57, Herminio Hernandez, Jr. wrote: > Do you have any advice for these guys? > > ---------- Forwarded message ---------- > From: aPEX <a...@gmx.ch <mailto:a...@gmx.ch>> > Date: Fri, May 1, 2015 at 9:36 AM > Subject: Re: Debian 8.0 PPC not working on Pegasos II G4 > To: "Herminio Hernandez Jr." <herminio.hernande...@gmail.com > <mailto:herminio.hernande...@gmail.com>> > > > Hello Herminio, > > in our forum now 3 other guys with a PEG-II did a test and came excatly to > the same result / problem. > > I am not a linux specialist, but the kernel part which is starting the > installation is working fine. > But because the installation fail and later also the booting there must be a > difference in the > kernel which is installed later. > > The Pegasos is based on the CHRP plattform: > http://www.freescale.com/files/32bit/doc/app_note/AN2666.pdf > <http://www.freescale.com/files/32bit/doc/app_note/AN2666.pdf> > > Thank you if you can help in any kind. > > Best regards, Robert > > > > Am 01.05.2015 um 16:27 schrieb Herminio Hernandez Jr. > <herminio.hernande...@gmail.com <mailto:herminio.hernande...@gmail.com>>: > > Oh that is not good. Let me reach out to a friend. > > Sent from my iPhone > > On May 1, 2015, at 8:41 AM, aPEX <a...@gmx.ch <mailto:a...@gmx.ch>> wrote: > > Hello, > > I tried this but it ends in this, see picture. > <IMG_0051.JPG> > > > > Am 30.04.2015 um 20:57 schrieb Herminio Hernandez Jr. > <herminio.hernande...@gmail.com <mailto:herminio.hernande...@gmail.com>>: > > If you are yaboot try this > > Linux radeon.modeset=1 video=offb:off video=radeonfb:off > > If that does not help then add this as well radeon.agpmode=-1 > > Sent from my iPhone > > On Apr 30, 2015, at 1:46 PM, aPEX <a...@gmx.ch <mailto:a...@gmx.ch>> wrote: > > Hello, > > it is a RADEON 9000 Pro with 128MB Memory. > > Best regards, aPEX > > > > Am 30.04.2015 um 19:38 schrieb Herminio Hernandez Jr. > <herminio.hernande...@gmail.com <mailto:herminio.hernande...@gmail.com>>: > > What is the video card you are using? > > Sent from my iPhone > > On Apr 30, 2015, at 12:07 PM, aPEX <a...@gmx.ch <mailto:a...@gmx.ch>> wrote: > > Hello, > > no one who can help? Debian 6.8 was still running fine… > I think if I will try Debian 8 I will have same problem like with 7.8? > > Best regards, aPEX > > > > Am 27.04.2015 um 20:27 schrieb aPEX <a...@gmx.ch <mailto:a...@gmx.ch>>: > > Hello all, > > I was using a long time Debian 6.x on my Pegasos II G4 with 1Ghz CPU und 2GB > Memory. > Last week I got the stupid idea to install everything new using latest Debian > 7.8, because > on the DVD there is still the install script for the Pegasos. :-) > > Installation itself is working fine till 95% and then abort there, some like > after-installation trigger. > We tested it on several Pegasos II that we have, always the same. I can go on > without installing > more software, but I assume that also some basic stuff is missing. > > Also the 3.x kernel is no more working on the Pegasos II, you will get screen > with grafic trash > right after starting the kernel. > > <IMG_9965.JPG> > > Any idea? I tried it in the IRC, but got no answer. > > It would be really fantastic if this problem could be fixed and the Pegasos > II will work again. > > > Best regards, Robert aka aPEX > > > > PS: I am just a user, no Linux guru, sorry for this… > > > -- > To UNSUBSCRIBE, email to debian-powerpc-requ...@lists.debian.org > <mailto:debian-powerpc-requ...@lists.debian.org> > with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org > <mailto:listmas...@lists.debian.org> > Archive: https://lists.debian.org/a1381917-b685-409d-8700-e25f3186f...@gmx.ch > <https://lists.debian.org/A1381917-B685-409D-8700-E25F3186F7B2%40gmx.ch> > > > -- > To UNSUBSCRIBE, email to debian-powerpc-requ...@lists.debian.org > <mailto:debian-powerpc-requ...@lists.debian.org> > with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org > <mailto:listmas...@lists.debian.org> > Archive: > https://lists.debian.org/806dd26d-3f78-411c-9a64-22d775eb5...@gmail.com > <https://lists.debian.org/806DD26D-3F78-411C-9A64-22D775EB5797%40gmail.com>
