-------- Original-Nachricht -------- > Datum: Sat, 04 Jun 2011 01:27:03 +0800 > Von: Bear <jiling...@gmail.com> > An: Gerhard Pircher <gerhard_pirc...@gmx.net> > CC: debian-powerpc@lists.debian.org > Betreff: Re: Can I install debian on a e300 board?
> hi, > It's amazing! I tried Freescale default Linux image and it also halt! > > U-Boot 1.3.0 (Dec 22 2008 - 11:19:29) MPC83XX > > Reset Status: > > CPU: e300c3, MPC8313E, Rev: 21 at 333.333 MHz, CSB: 166 MHz > Board: Freescale MPC8313ERDB > I2C: ready > DRAM: 128 MB > FLASH: 8 MB > NAND: 32 MiB > In: serial > Out: serial > Err: serial > Net: TSEC0, TSEC1 [PRIME] > Hit any key to stop autoboot: 0 > => > => setenv serverip 192.168.0.104 > => setenv loadaddr 0x01000000 > => dhcp > Speed: 100, full duplex > BOOTP broadcast 1 > DHCP client bound to address 192.168.0.103 > Using TSEC1 device > TFTP from server 192.168.0.104; our IP address is 192.168.0.103 > Filename 'uImage'. > Load address: 0x1000000 > Loading: ################################################################# > ############################################## > done > Bytes transferred = 1617371 (18addb hex) > => bootm 0x01000000 > ## Booting image at 01000000 ... > Image Name: Linux-2.6.23 > Created: 2008-12-22 3:22:49 UTC > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 1617307 Bytes = 1.5 MB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > Uncompressing Kernel Image ... OK > > The default kernel should be boot correctly, but it also make my board > hang. Is there anybody can give me some advice? Thanks! I would check, if U-Boot really hands over a device tree to the kernel (the "fdt" command may be of use here). Otherwise you may have to load a device tree file manually and specify its address as an argument for the bootm command (if that is supported by your U-Boot version). Gerhard -- Empfehlen Sie GMX DSL Ihren Freunden und Bekannten und wir belohnen Sie mit bis zu 50,- Euro! https://freundschaftswerbung.gmx.de -- To UNSUBSCRIBE, email to debian-powerpc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110603211317.246...@gmx.net
