On Apr 26, 2010, at 7:10 AM, Shawn H Corey wrote:
Frédéric Massot wrote:
Hi,
4 years ago, I installed Debian with a software RAID 1 on a G4 for
an LDAP server. In the end, I did not use the G4 and it remained
in a closet. I would again make use of this G4 server with a
software RAID 1 and LVM, I use the Squeeze installer.
- Is it always to be given at the beginning of the hard drives the
two partitions "Apple_partition_map" and "Apple_Bootstrap"?
The first partition of any drive must be the partition map so the
software can find it. The Apple_Bootstrap partition must be the
second partition in the map but, physically, it can be anywhere on
the disk.
- Is that still uses Yaboot or Squeeze uses grub2 ?
PowerPCs always use yaboot.
Does yaboot know enough about LVMs and RAIDs to find the kernel and
initrd in a root partition that's in a logical volume on a software
raid-1?
To be safe, I'd create a real, live, physical root (or at least a /
boot -- not the same as the "Apple_Bootstrap") on each of physical
disks of the RAID-1, and periodically mirror them from the "active
one". Then if the disk with the active root (or /boot) goes south,
you can manually tell yaboot to use one of the mirrors.
I've never actually tried that, myself. The configuration I use
personally is slightly less reliable but much easier to set-up. I
have 3 disks, one small one and two big ones. The two big ones are
setup in a raid-1 and partitioned with LVM. All user data resides on
the RAID/LVM. The small disk has everything necessary to boot the
system, find the LVM and so on, but nothing that can't be
reconstructed by re-installing -- i.e. no user data. If the root disk
goes south, I can replace it and use a live-cd to restore it from
backups or re-install it from scratch using an install CD.
Enjoy!
Rick
--
To UNSUBSCRIBE, email to debian-powerpc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/021d9ab6-34ac-4b0c-817a-07fc73814...@pobox.com