Problems hitting Airport Extreme Base Station with WEP

[Rory Campbell-Lange]

I'm trying to connect to an Airport Extreme Base Station using WEP. I am
trying to connect from an iBook rev2.2 using the old wireless card -- I
can connect fine without WEP.

My interfaces file has the following stanza:

auto eth0
iface eth0 inet static
    address 10.0.1.11
    netmask 255.255.255.0
    gateway 10.0.1.1
    up iwconfig eth0 essid clw
    up iwconfig eth0 enc <password>.


First of all its difficult to find out what the key is as I understand I have
to try and extract the hex key. I dumped the config files after changing
my base station from 40bit WEP to 128bit WEP and found that the only
differences were:

    (128bit)
    <key>raWE</key>
    <data>
    kcpW10XKkLsUv/UJYg==
    </data>
    <key>raWM</key>
    <integer>2</integer>

    (40bit)
    <key>raWE</key>
    <data>
    kcpW10U=
    </data>
    <key>raWM</key>
    <integer>1</integer>

Any ideas on how to extract the keys? I've tried using these keys, but I
get errors (obviously, I suppose, since they are the wrong length...):

# iwconfig eth0 key kcpW1OU=
Error for wireless request "Set Encode" (8B2A) :
    invalid argument "kcpW1OU=".

Thanks,
Rory
-- 
Rory Campbell-Lange 
<[EMAIL PROTECTED]>
<www.campbell-lange.net>