> > So in the XF86Config-4 file I set PCI to 00:10:0
>
> lspci gives HEX output... 0x10 is actually decimal 16, so try 00:16:0 :-)
Ah. OK then. In that case my problem is that the display dies at some stage
during the process of starting X. I get the same result by commenting out the
BusID line altogether or by using the example XF86Config-4 from:
http://mij.oltrelinux.com/ibook/step_step/#xfree
Following execution of the startx command the screen goes blank (as expected),
gives a momentary flick of light (as expected) and then reverts to blankness.
My network is up and running. I have tried both 'startx' and 'startxfce4'.
A ps -ax executed via an ssh session now gives:
532 tty1 S+ 0:00 /bin/sh /usr/bin/X11/startx
543 tty1 S+ 0:00 xinit /usr/X11R6/lib/X11/xinit/xinitrc -- /usr/X11R6/
544 ? R< 0:43 /usr/bin/X11/X -dpi 100 -nolisten tcp
I have put the resulting X log files at:
http://www.soton.ac.uk/~ajl199/xlogs/
The machine is an ibook G3 900 and its graphics card according to lspci is:
ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
Any ideas?
Many thanks again,
Adrian.
*******
