I'm trying to get my airport card working on my ibook 800Mhz G3. It used to work fine, in multiple locations with my 2.4.25 kernel on my ibook 500Mhz! I'm not sure what I'm doing wrong -- I've installed wireless tools. I expected to see "hermes" and "orinoco" listed in lsmod, but if I try to insmod these they can not be found.
Help much appreciated. Rory Simple case details: auto eth1 iface eth1 inet static address 192.168.181.11 netmask 255.255.255.0 gateway 192.168.181.254 up iwconfig eth1 essid benguela ifup eth1: Error for wireless request "Set ESSID" (8B1A) : SET failed on device eth1 ; Operation not supported. Failed to bring up eth1. eth1 Link encap:UNSPEC HWaddr 00-0A-95-FF-FE-E4-6A-F6-00-00-00-00-00-00-00-00 inet addr:192.168.181.11 Bcast:192.168.181.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) lsmod: Module Size Used by af_packet 21096 0 radeon 138416 2 ipv6 308900 10 usb_storage 89292 0 eth1394 24840 0 sungem 37444 0 crc32 4832 1 sungem sungem_phy 10240 1 sungem ohci1394 41764 0 ieee1394 448104 2 eth1394,ohci1394 ohci_hcd 24420 0 usbcore 128768 4 usb_storage,ohci_hcd uninorth_agp 8672 1 agpgart 42380 2 uninorth_agp tsdev 8640 0 evdev 11936 0 ide_cd 50692 0 cdrom 49276 1 ide_cd xfs 592308 0 jfs 197440 0 nls_base 8672 1 jfs reiserfs 305912 0 ext2 65348 0 ext3 129776 1 jbd 71320 1 ext3 mbcache 10116 1 ext3 ide_disk 27424 3 sd_mod 25536 0 scsi_mod 118368 2 usb_storage,sd_mod unix 32088 78 -- Rory Campbell-Lange <[EMAIL PROTECTED]> <www.campbell-lange.net>