Selon Joe Malik <[EMAIL PROTECTED]>: > On Wed, Dec 24, 2003 at 02:00:51PM +0100, Nicolas Bertolissio wrote:
> > So I have created a 3GB file with (home/ has an ext3 filesystem): > > dd if=/dev/zero of=/home/mol/macosx bs=3k count=1M > > This file is not mounted when I try to start MOL. > > It starts well and I get the Mac OS X install utility, but the Disk > > Utility shows a disk with 0 byte capacity instead of the expected > > 3GB. > > > > I've got the following error on the console when MOL mounts the > > disks: > > ----- MOL console > > <No SCSI Device> > > > > CD /dev/cdrom CDROM <read-only> ------ BOOT1 > > fstat: Value too large for defined data type > > fstat: Value too large for defiend data type > > Disk /home/mol/maco.. <rw> ------ > > ----- MOL console > > > > How can I find which value is too large and what the maximum value > > is? > > > > Hi Nicolas, > > you need to create a filesystem on the file. Use 'hformat <file>' to > do > this. The hformat binary is in the hfsutils-package. # hformat /home/mol/macosx hformat: /home/mol/macosx: error opening medium (File too large) 3GB is too much for ext3? Nicolas
