hi list... i just wanted to add some info about my 15" albook to this..
* "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> [2003-12-06 14:54 +0100]: > What can work for now ? > > - Audio CD's are working too (with xine -H). External HP work too. > (Not tested Audio-in) hm, that does not work for me. i can play CDs, but cannot hear them (in contrast to playing internet-radio, ogg, system-sounds). there is no channel for CD seen in the alsamixer. i tried to upgrade to alsa 1.0.0rc1 once which did not seem to be compatible to kernel 2.6.0-test11-benh (last week) which comes with alsa 0.9.7. perhaps you are using the OSS module (dmasound_pmac)? well, somewhere, there must be a newer version of alsa than 0.9.7 for 2.6.x... > The screen luminosity (F1, F2) and the sounds buttons (F3 F4 F5) are > working too. The eject button don't work for now. well, pbbuttonsd does not work for me when it comes to the buttons. the luminosity works as long as there is _no_ pbbuttonsd running. volume, eject and power buttons are ignored, although the generated keycodes match with the ones defined in the config file. except the eject-button which generates several keycodes at once. perhaps my slightly modified i386-qwertz-de-latin1-nodeadkeys keymap has something to do with that? fortunately, i work a lot with gnome and acme is really helpful, then. :) > What "can, but not sure" work : > > Bluetooth hm, sort of works. but not really. when i load the module, i get this: Bluetooth: HCI USB driver ver 2.4 bus usb: add driver hci_usb bound device '2-1:1.0' to driver 'hci_usb' hci_usb: probe of 2-1:1.1 failed with error -5 hci_usb: probe of 2-1:1.2 failed with error -5 drivers/usb/core/usb.c: registered new driver hci_usb hci0 can be upped but then dmesg shows this: hci_usb_isoc_rx_submit: hci0 isoc rx submit failed urb e3931e14 err -22 afterwards, i can l2ping my mobile phone. though i get a reply with 0 bytes (?). the sdptool also discovers all services offered by the phone. but rfcomm does not work at all, but this could be a user-space problem as it complains about a not-found configuration for rfcomm0. which is definitely there and is read by rfcomm. anyway, the README of bluez-utils says that they currently focus on 2.4. > PCMCIA works great. tried with wlan, lan and modem cards. > IEEE1394. works with my external harddisk, too. at least in S400, do not have a device for S800. although i get a trace when loading ohci1394: bus pci: add driver ohci1394 ohci1394: $Rev: 1045 $ Ben Collins <[EMAIL PROTECTED]> ohci1394_0: Unexpected PCI resource length of 1000! ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[4096] bad: scheduling while atomic! Call trace: [c000bb28] dump_stack+0x18/0x28 [c0017d44] schedule+0x81c/0x820 [c0007dfc] syscall_exit_work+0x108/0x10c [d6633d48] 0xd6633d48 [f5461c4c] nodemgr_add_host+0xac/0x11c [ieee1394] [f545d46c] highlevel_add_host+0xac/0xb4 [ieee1394] [f545c67c] hpsb_add_host+0x80/0xc0 [ieee1394] [f5093148] ohci1394_pci_probe+0x38c/0x4f4 [ohci1394] [c00dc5dc] pci_device_probe_static+0x6c/0x8c [c00dc64c] __pci_device_probe+0x50/0x70 [c00dc69c] pci_device_probe+0x30/0x60 [c00fa7e4] bus_match+0x50/0x8c [c00fa964] driver_attach+0x88/0xc8 [c00facfc] bus_add_driver+0xa4/0xf4 [c00fb194] driver_register+0x30/0x40 bus ieee1394: add device fw-host0 bounddevice'fw-host0'todriver'ieee1394_host' bounddevice'0002:06:0e.0'todriver'ohci1394' busieee1394:adddevice000a95fffedc19b2 bounddevice'000a95fffedc19b2'todriver'ieee1394_node' ieee1394:Hostadded:ID:BUS[0-00:1023] GUID[000a95fffedc19b2] well, i will post this on the somewhen next year on the firewire-ml, when the things not yet working got somewhat fixed. :) ok, i think i will tackle the bluetooth issues next, as they seem the most pressing to me. but beforehand i am trying to fix the problems with yafc, as you can see at BTS #222632. cheers, sebastian -- ::: .O. ::: ..O ::: OOO ::: lynx -source http://www.kodeaffe.de/shensche.pub | gpg --import
signature.asc
Description: Digital signature
