[BE CAREFUL : cut the NOSPAM in the reply to field if you want to send
me an email]
Hi,
Just for say I now can use XFree on my new powerbook (SD / 1,25GHz) :-)
Debian unstable (sid), of course. But why doesn't XFree work ?
It was simply my fault : the rsync tree I was using wasn't the good
one...after an incomplete command, like above, I was able to find the
solution :
[EMAIL PROTECTED]:~$ rsync -avz --delete source.mvista.com::
mol Mac-On-Linux Source
libmol Binary MOL Support Files
yaboot Ethan's Yaboot Devel Tree
yaboot-benh BenH's Experimental Yaboot Tree
linuxppc_2_4 LinuxPPC 2.4 BitKeeper tree, stable branch
linuxppc-2.4 "LinuxPPC branch of the official 2.4 BitKeeper tree"
linuxppc_2_4_benh Ben's 2.4 Tree (aka, the PowerMac tree)
linuxppc_2_4_devel LinuxPPC 2.4 BitKeeper tree, development branch
linuxppc-2.5 LinuxPPC 2.5 tree, based on Linus' BitKeeper tree
linuxppc-2.5-benh Ben's 2.5 / 2.6 tree, based on the LinuxPPC 2.5 / 2.6
tree.
And before I see my error I was using the linuxppx-2.5 tree, while the
good one was the linuxppx-2.5-benh :-/
I found this inspecting the .config from Michel Dänzer, because I
couldn't set CONFIG_FB_RADEON_I2C.
Thank you Michel.
FYI, all the modelines I've placed in my /etc/X11XF86Config-4 seems to
work. For example, I can test
1280x960 (85Hz, 75Hz and 60Hz), 1152x864 (100Hz, 60,01Hz),1024x768
(74,77Hz). All the value are given by xvitune.
Iv'e tested 800x600 (144,53 Hz !!), 640x512, 640x400 and a lot of not
really usable modelines, all with success.
For the fun, glxgears give me nearly 100 FPS :-)
The only problem I've is a black stripe (lost area) in the bottom
of the screen for 2 or 3 modelines.
What can work for now ?
- DVD are working perfectly in *fullscreen* with Xine
(but not tested DVDrecording )
- Audio CD's are working too (with xine -H). External HP work too.
(Not tested Audio-in)
- USB is working perfectly : usb mouse (Logitech V : 0x046d P : 0xc001).
USB wifi-gadget MA111 from NetGear don't work with 2.6.0testxx, but
works perfectly (excepted WEP) with 2.4.2x. So it's not an hardware
problem, but a driver problem.
No tested so-called USB2, because I've not such hardware. But EHCI Host
controller appears with a correct description with usbview.
I've seen an unknown Device :
Vendor Id : 0x05ac (Apple Computer :-) )
Pruduct Id : 0x8203 [ unknown ]
(if this can help someone, I've others informations about this)
- Internal Ethernet is working perfectly too.
The screen luminosity (F1, F2) and the sounds buttons (F3 F4 F5) are
working too. The eject button don't work for now.
What "can, but not sure" work :
Bluetooth, PCMCIA, IEEE1394.
lsmod give :
[EMAIL PROTECTED]:~$ /sbin/lsmod
Module Size Used by
atmel_cs 8836 0
atmel 43396 1 atmel_cs
firmware_class 7872 1 atmel
bnep 16832 0
l2cap 25060 3 bnep
bluetooth 54460 4 bnep,l2cap
ds 14436 3 atmel_cs
yenta_socket 16320 1
pcmcia_core 78040 3 atmel_cs,ds,yenta_socket
evdev 9440 3
ehci_hcd 26052 0
raw1394 26860 0
sbp2 24624 0
ohci1394 36936 0
ieee1394 301208 3 raw1394,sbp2,ohci1394
st 38328 0
sr_mod 19300 0
sg 35644 0
sd_mod 16512 0
dmasound_pmac 85240 2
dmasound_core 19884 3 dmasound_pmac
soundcore 8192 3 dmasound_core
uninorth_agp 6816 1
agpgart 33100 1 uninorth_agp
radeon 132172 0
sungem 32772 0
sungem_phy 9600 1 sungem
PCMCIA card :
Belkin F5D6020 ver. 2 with ATMEL AT76C502A chipset (I'm sure : I've open
it :p ). So I've decided to use the atmel_cs kernel module, new in the
2.6.x. Am'I wrong somewhere?
alube:/home/eric# dump_cis
Socket 0:
attr_dev_info
fn_specific 250ns, 2kb
manfid 0x01bf, 0x3302
funcid network_adapter
vers_1 5.0, "Belkin", "11Mbps-Wireless-Notebook-Network-Adapter"
config base 0x0800 mask 0x0001 last_index 0x02
cftable_entry 0x01 [default]
[mwait] [pwrdown]
Vcc Vnom 5V Iavg 250mA Ipeak 250mA Idown 25mA
timing wait 12us
io 0x0000-0x001f [lines=5] [16bit]
irq mask 0xffb8
[EMAIL PROTECTED]:~$ cat /proc/bus/pccard/drivers
atmel_cs 1 0
But this card doesn't work for now, because I don't know how to "bind"
it in /etc/pcmcia/config :
card "Belkin 11Mbps-Network-Wireless-Notebook-Network-Adapter"
manfid 0x01bf, 0x3302
bind "?????"
# what write here? atmel_cs doesn't work and stop the boot from time to time
/proc/ioports give :
00000000-007fffff : /[EMAIL PROTECTED]
00000060-0000006f : i8042
00001000-000010ff : PCI CardBus #02
00001400-000014ff : PCI CardBus #02
00802000-01001fff : /[EMAIL PROTECTED] course,
00802400-008024ff : 0000:00:10.0
ff7fe000-ffffdfff : /[EMAIL PROTECTED]
And /proc/interrupts :
CPU0
1: 246 OpenPIC Edge Built-in Sound out
2: 0 OpenPIC Edge Built-in Sound in
24: 9 OpenPIC Level ide1
25: 158823 OpenPIC Level VIA-PMU
26: 363 OpenPIC Level keywest i2c
29: 10 OpenPIC Level ohci_hcd
39: 16395 OpenPIC Level ide0
40: 2 OpenPIC Level ohci1394
41: 5145 OpenPIC Level eth0
42: 0 OpenPIC Level keywest i2c
47: 7945 OpenPIC Level GPIO1/ADB
53: 3 OpenPIC Level yenta
61: 2 OpenPIC Edge Headphone detect
63: 61113 OpenPIC Level ohci_hcd, ohci_hcd, ehci_hcd
BAD: 146656
Dont work (sure) :
external DVI --> VGA adaptator :
One word about MOL : doesn't even compile, because an userland fb
problem. So, I've not the time to investigate more for now. But hfsplus
and hfs modules are mowking perfectly (r/w). So I'm happy :-)
The last but not the least :
*about sleep*
First I'm using 2.6.0test11 from BenH
I cannot reproduce the "feature" described above : CapsLock Button is
working correctly for me. Be careful, because I'm using a "french_new"
with (from XF86Config-4), not the standard configuration :
Option "XkbRules" "xfree86"
Option "XkbModel" "macintosh"
Option "XkbLayout" "fr_new" # clavier Apple
# from Etienne Herlent, the same one as I'm using for my ibook
#
#
Option "XkbOptions" "NoDeadKeys"
my kernel version is the :
Linux alube 2.6.0-test11v2 #1 Thu Dec 4 10:23:18 CET 2003 ppc GNU/Linux
# so called (v2) because the v1 doesn't come from the good tree :-)
Of course, giving all this information I wish they can help someone.
Again, thank you BenH and Muchel Dänzer for your very good work.
Best Regards, eric
--
NO ePATENTS / NON AUX BREVETS SUR LES LOGICIELS.See / Voir
http://swpat.ffii.org/
eric b
