On Wed, 25 Jun 2003, Mich Lanners wrote: > On 25 Jun, this message from Martin-Éric Racine echoed through > cyberspace: > >> On Tue, Jun 10, 2003 at 09:53:10AM +0300, Martin-Éric Racine wrote: > >> > Most things work, except for sound, yet I have enabled > >> > CONFIG_DMASOUND_PMAC=m (I also tried to compile it built-in, > >> > before). Syslog complains that: > >> > > >> > Jun 10 09:36:00 omena modprobe: modprobe: Can't locate module > >> > char-major-10-134 > > char 10 134 is /dev/apm_bios. Did you start X just before? Then you are > lacking kernel apm emulation. Anyway, unrelated to sound.
Correct. I do not find any menu option for this, on this architecture, though. > >> > Jun 10 09:36:07 omena modprobe: modprobe: Can't locate module > >> > sound-slot-1 > > This is the second sound card, Correct. > >> > Jun 10 09:36:07 omena modprobe: modprobe: Can't locate module > >> > sound-service-1-0 > > and this the corresponding mixer device /dev/mixer1. Correct. > Try 'modprobe dmasound_pmac' by hand and report the results. Syslog shows the exact same credits and defaults as when loaded from the stock kernel-image-2.4.20-powerpc, except there is no 'pop' sounds when the module is loaded and sound output is dead, on my self-compiled kernel-image: PowerMac Burgundy DMA sound driver rev 016 installed Core driver edition 01.06 : PowerMac Built-in Sound driver edition 00.07 Write will use 4 fragments of 32768 bytes as default Read will use 4 fragments of 32768 bytes as default -- Martin-Éric Racine http://www.pp.fishpool.fi/~q-funk/
