Hello Harold!
STOP STOP!!!!
If you have a PowerBook (FireWire) you do not have to remove any part of
the case to upgrade your memory.
I you want to get to the bottom mem-slot, you have to remove the
keyboard, the heat-desipator from the cpu and than you can pull out the
cpu-modul.
You will be very dispointed if you remove the bottom case, cause you
will only see the mainboard and no mem-slot.
Hope this helps,
Christoph
"Harold G. Stevenson" schrieb:
>
> Hi,
>
> I'm trying to upgrade the memory on a PowerBook G-3 2000 series(I believe
> that that means with firewire).
>
> My problem is removing the case from the bottom in order to replace the
> 126MB that came with it. I have the PDF file from vikingcomponents.com;
> however, its diagram shows 3 screws going across the middle underside of
> the machine. I can only see 2. One on one side and the other on the other.
> Does this middle screw exit? Or, is it hidden under the Apple logo? Or, is
> there some other explanation.
>
> I have taken all of the screws off and there still seems to be something
> holding it down in that area that the PDF file suggests.
>
> If anyone has any suggestions or even the answer to my situation please
> let me know how to remove it.
>
> Thank you and any HELP will be greatly appreciated.
>
> >From Tucson-:))
>
> Harold
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
--
Dipl. Ing. Christoph Ewering C & E Informationsdienste GbR
0 52 54 80 68 66 oder 0173 566 266 1
[EMAIL PROTECTED]
