On Mon, Mar 05, 2001 at 01:16:32PM -0800, Alan DuBoff wrote: > > I think you are better off getting the CD to boot and building the kernel on > the titanium. I don't like the concept of building a kernel on another > machine, since the hardware could be and probably is different,
That's totally bogus. Nothing depends on the hardware of the computer the kernel is compiled on. With a cross-compiler, you should be able to use a fast PPC to compile a kernel on an old x86 laptop. > it gets > confusing knowing which .config you used...just my $0.02, take it with a grain > of salt. The two machines are similar, so you could do that though. The .config files are the only confusing part. I usually copy .config to /usr/src/machinename.conf when I'm done. I use my P200MMX desktop machine to compile kernels for my slower x86 machines, a P75 and a 486 laptop. The laptop didn't (until a recent factor-of-20 upgrade to disk space :) have enough room for the kernel source tree, and it would have taken all day to compile 2.4.2 on it with 20MB of RAM. My PPC machine compiles its own kernel, because it's easier to do that than install a cross compiler to compile my x86 kernels on it. You can switch .config files by copying a new one in and running make oldconfig. -- #define X(x,y) x##y Peter Cordes ; e-mail: X([EMAIL PROTECTED] , ns.ca) "The gods confound the man who first found out how to distinguish the hours! Confound him, too, who in this place set up a sundial, to cut and hack my day so wretchedly into small pieces!" -- Plautus, 200 BCE
