> Ok, the patch is now getting "good enough" for wider testing. It applies
> on current "git" tree (or 2.6.12-rc6 when/if that is ever released). It
> requires one other patch to be applied first:
>
> http://gate.crashing.org/~benh/ppc32-remove-macserial.diff
>
> The PM patch itself can be found at:
>
> http://gate.crashing.org/~benh/ppc32-rework-pm.diff
>
> This patch completely reworks both suspend-to-ram and suspend-to-disk
> support on PowerMac:
This patch works almost perfectly on my PowerBook5,6 15" (ATI). Suspending to
RAM
and DISK work beautifully, even in X, even with a USB mouse connected, even with
some music being played.
I have a few minor glitches with suspend-to-disk only:
* after resuming the sound won't work until you 'touch' the master volume
and/or
the DRC level in alsamixer.
* looking at the console messages when resuming, I see those 'normal'
messages:
Stopping tasks:
=============================================================================================================================================|
Freeing memory... done (42488 pages freed)
swsusp critical section done
After those messages and before the machine powers down, I see a few
messages
related to resume, such as (hand copied so not necessarily exact):
Restoring Highmem
radeonfb resuming from state 2
eth0: resuming
PHY ID: 1410cc2, addr: 0
hda: Enabling Ultra DMA 5
hdc: Enabling MultiWord DMA 2
ehci_hcd 0001:10:1b.2: park 0
ehci_hcd 0001:10:1b.2: USB 2.0 restarted
I'm not sure those actions are supposed to happen. Or is this necessary for
powering down the machine ?
* time doesn't get restored correctly, I have to do a
/etc/init.d/hwclock.sh start
after resuming. I'm not sure this is normal or should be done automagically
on resume.
Thanks Ben !
Stelian.
--
Stelian Pop <[EMAIL PROTECTED]>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
