> > /dev/fd0 /floppy auto defaults,user,noauto 0 0
> > /dev/cdrom /cdrom iso9660 defaults,ro,user,noauto 0 0
>
> The defaults directive doesn't make too much sense when combined with
> other directives, it should be removed from both those lines. You only
> need to specify defaults when you're not specifying anything else.
If i know it correctly, /etc/fstab and /etc/init.d/network looks like as
the above. I like it to have it a lilltle bit verbose; my fstab looks:
# /etc/fstab: static file system information.
# $Id: fstab.sample,v 3.4 1995/02/20 03:30:26 imurdock Exp $
#
# The following is an example. Please see fstab(5) for further details.
# Please refer to mount(1) for a complete description of mount options.
#
# Format:
# <file system> <mount point> <type> <options> <dump> <pass>
#
# dump(8) uses the <dump> field to determine which file systems need
# to be dumped. fsck(8) uses the <pass> column to determine which file
# systems need to be checked--the root file system should have a 1 in
# this field, other file systems a 2, and any file systems that should
# not be checked (such as MS-DOS or NFS file systems) a 0.
#
# The `sw' option indicates that the swap partition is to be activated
# with `swapon -a'.
/dev/sda5 none swap sw 0 0
#
# The `bsdgroups' option indicates that the file system is to be mounted
# with BSD semantics (files inherit the group ownership of the directory
# in which they live). `ro' can be used to mount a file system read-only.
#/dev/sda1 /mnt msdos defaults,noauto 0 0
/dev/sda2 / ext2 defaults 0 1
#/dev/sda4 /cdimage msdos defaults,noauto 0 0
/dev/sda6 /home ext2 defaults 0 2
/dev/sda3 /var ext2 defaults 0 2
#/dev/sda8 /tmp ext2 defaults 0 2
#/dev/sda9 /home/ftp ext2 defaults 0 2
/dev/sda7 /project ext2 defaults 0 2
#/dev/sda11 /usr/local ext2 defaults 0 2
#
# noauto: file system should not be mounted with 'mount -a'
# user : indicates that normal users are allowed to mount
# unhide:
#
/dev/cdrom /cdrom iso9660 ro,user,noauto,unhide 0 0
/dev/fd0 /floppy msdos defaults,noauto,user 0 0
#
# NFS file systems:
#server:/export/usr /usr nfs defaults 0 0
#
# proc file system:
proc /proc proc defaults 0 0
# pts file system
devpts /dev/pts devpts gid=5,mode=620 0 0
and /etc/init.d/network:
#!/bin/sh
# network: establish the network connection.
# $Id: network,v 1.1 1995/02/19 20:29:29 imurdock Exp $
# Configure the loopback device.
/sbin/ifconfig lo 127.0.0.1
/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 dev lo
# Configure the ethernet device or start SLIP/PPP below.
IPADDR="172.16.10.1" # Your IP address
NETMASK="255.255.255.0" # Your netmask
NETWORK="172.16.10.0" # Your network address
BROADCAST="172.16.10.255" # Your broadcast address (blank if none)
GATEWAY="192.129.16.1" # Your gateway address
/sbin/ifconfig eth0 ${IPADDR} netmask ${NETMASK} broadcast ${BROADCAST}
#/sbin/ifconfig dummy ${IPADDR} netmask ${NETMASK} broadcast ${BROADCAST}
#/sbin/route add -net ${NETWORK} netmask 255.255.255.0 dev eth0
#/sbin/route add -net ${NETWORK} netmask 255.255.255.0 dev dummy
#/sbin/route add default gw ${GATEWAY} metric 1
I like also some addings for /etc/profile, but this is maybe off-topic:
# /etc/profile: system-wide .profile file for bash(1).
PATH="/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games"
PS1="\\$ "
export PATH PS1
export CVS_RSH=ssh
alias l='ls -l'
alias ll='ls -al'
alias lr='ls -ltr'
if [ -x /usr/bin/less ] ; then
export LESS='-c -e -M'
PAGER=/usr/bin/less
LESSCHARSET=latin1
export PAGER LESSCHARSET
elif [ -x /usr/bin/most ] ; then
PAGER=/usr/bin/most
export PAGER
fi
if [ -x /usr/bin/minicom ] ; then
MINICOM='-m -c on'
export MINICOM
fi
umask 002
/usr/bin/check-sendfile
if [ -f /etc/language ]; then source /etc/language; fi
if [ -f /etc/bash_aliases ]; then . /etc/bash_aliases; fi
The 'less' entry speedup remote access per less. Users wonders why
minicom startsup in monochrome. And 'l', 'll' and 'lr' are useful.
Thanks,
Hartmut
