Hi,
thank you a lot foir your post.
In tried it.
I copied from your xorg.conf
that part and tried the command.
It didn't work.
After the command
"xrandr --output LVDS --mode 1024x768 --output VGA-0 --mode 1024x768
--left-of LVDS"
it created on the laptop screen on the right a blue area...
Maybe the screen are completely messed out.
The laptop screen is replaced by the external monitor?
When the system enters into gdm the external
screen is going out already.
I think that I made the upgrade into 'lenny'
when the external screen was connected.
Maybe that created a problem?
- hv
--- On Fri, 2/20/09, Maggie Dusnic <mag...@clivemenzies.co.uk> wrote:
From: Maggie Dusnic <mag...@clivemenzies.co.uk>
Subject: Re: external monitor?
To: debian-laptop@lists.debian.org
Date: Friday, February 20, 2009, 10:25 PM
Hannu Virtanen wrote:
Hi,
thank you a lot for your post.
I spent quite a long time already yesterday
with that wiki text. But it didn't help much.
Where should you put that
"xrandr --output LVDS --mode 1024x768 --output VGA-0 --mode 1024x768
--left-of LVDS"
?
In "xorg.conf file" or?
the output of xrandr -q in my system:
+++++++++++++++
~$ xrandr -q
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1680 x 1200
VGA-0 connected 1024x768+0+0 (normal left inverted right x axis y axis)
306mm x 230mm
1680x1050 60.0
1600x1024 60.0
1400x1050 60.0
1280x1024 59.9 60.0
1440x900 60.2
1280x960 60.0
1280x800 60.0
1152x864 75.0
1280x768 60.0
1152x768 54.8
1024x768 84.9 85.0 75.1 75.0 70.1 60.0*
832x624 74.6
800x600 84.9 85.1 72.2 75.0 60.3 56.2
640x480 85.0 75.0 72.8 75.0 60.0 59.9
720x400 85.0 70.1
640x400 85.1
640x350 85.1 70.1
LVDS connected 1024x768+0+0 (normal left inverted right x axis y axis)
304mm x 228mm
1024x768 60.0*+
800x600 60.3
640x480 59.9
S-video disconnected (normal left inverted right x axis y axis)
++++++++++++++
What is your advice, what do with that?
- hv
--- On Fri, 2/20/09, Maggie Dusnic <mag...@clivemenzies.co.uk>
wrote:
xrandr does work on Lenny. We've got
two laptops using it with no
problems. Studying http://www.thinkwiki.org/wiki/Xorg_RandR_1.2
was
really helpful, particularly understanding the 2048x2048 concept in the
Virtual screen section. With xrandr you keep your xorg.conf file to a
minimum.
Obviously your mileage may vary but if it's any help, my xrandr command
is:
$ xrandr --output LVDS --mode 1024x768 --output VGA-0 --mode 1024x768
--left-of LVDS.
I had to change VGA to VGA-0. You can find your own display types with:
$ xrandr -q
That's it, although in Xfce I have to log out and then back in again to
get the extra widths showing in the desktop workspaces.
Hope it helps
Maggie
Here's an extract from my xorg.conf:
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
# DefaultDepth 24
SubSection "Display"
# Depth 24
# Modes "1024x768"
Virtual 2048 2048
EndSubSection
EndSection
Then, from the command line, run:
xrandr --output LVDS --mode 1024x768 --output VGA-0 --mode 1024x768
--left-of LVDS
Maggie
