On Sun, Aug 12, 2007 at 06:30:48PM -0500, José Manuel Pérez wrote: > 2007/8/12, Thomas Hahn <[EMAIL PROTECTED]>: > > Hello, > > I have a Toshiba M40X-112 laptop. > > So far I am quite happy with it, but the DVD-writer does not work. > > I am getting loads of: > > > > ---snip--- > > Aug 6 13:39:01 satellita kernel: sr0: CDROM not ready. Make sure there is > > a disc in the drive. > > Aug 6 13:39:32 satellita last message repeated 31 times > > ---snap--- > > > > I have googled around and this problem comes up quite a few times. > > Most remedies deal with older kernels and so far I cannot figure > > out a way to make it work. > > > > When I look at kernel messages, there is: > > ---snip--- > > Aug 6 13:39:01 satellita kernel: sr0: CDROM not ready. Make sure there is > > a disc in the drive. > > Aug 12 17:02:36 satellita kernel: ahci: probe of 0000:00:1f.2 failed with > > error -22 > > Aug 12 17:02:36 satellita kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE > > IDE ] > > Aug 12 17:02:36 satellita kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> > > GSI 19 (level, low) -> IRQ 19 > > Aug 12 17:02:36 satellita kernel: scsi0 : ata_piix > > Aug 12 17:02:36 satellita kernel: scsi1 : ata_piix > > Aug 12 17:02:36 satellita kernel: ata1: SATA max UDMA/133 cmd 0x000101f0 > > ctl 0x000103f6 bmdma 0x000118b0 irq 14 > > Aug 12 17:02:36 satellita kernel: ata2: PATA max UDMA/100 cmd 0x00010170 > > ctl 0x00010376 bmdma 0x000118b8 irq 15 > > ---snap--- > > > > So for me it looks like the ahci module is giving up and ata_piix is > > taking over. > > lsmod prints out: > > ---snip--- > > Aug 6 13:39:01 satellita kernel: sr0: CDROM not ready. Make sure there is > > a disc in the drive. > > sr_mod 17284 1 > > cdrom 33568 1 sr_mod > > sd_mod 27904 6 > > ata_piix 14148 6 > > ahci 22020 0 > > ata_generic 8324 0 > > libata 116624 3 ata_piix,ahci,ata_generic > > scsi_mod 137388 5 firewire_sbp2,sg,sr_mod,sd_mod,libata > > ---snap--- > > > > lspci shows: > > ---snip--- > > 00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller > > (rev 03) > > ---snap--- > > > > kernel command line is: > > ---snip--- > > Aug 12 17:02:36 satellita kernel: Kernel command line: root=/dev/sda5 ro > > libata.atapi_enabled=1 > > ---snap--- > > > > So I have tried this libata.atapi_enabled=1 option, but this doesnt > > help. > > > > Any advice? > > Thanks Thomas > > -- > > Thomas Hahn == [EMAIL PROTECTED] > > > > > What version of kernel do you have ?
Arggh, sorry forgot this: 2.6.22-1-686-bigmem -- Thomas Hahn == [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]