Hello, I have a Toshiba M40X-112 laptop. So far I am quite happy with it, but the DVD-writer does not work. I am getting loads of:
---snip--- Aug 6 13:39:01 satellita kernel: sr0: CDROM not ready. Make sure there is a disc in the drive. Aug 6 13:39:32 satellita last message repeated 31 times ---snap--- I have googled around and this problem comes up quite a few times. Most remedies deal with older kernels and so far I cannot figure out a way to make it work. When I look at kernel messages, there is: ---snip--- Aug 6 13:39:01 satellita kernel: sr0: CDROM not ready. Make sure there is a disc in the drive. Aug 12 17:02:36 satellita kernel: ahci: probe of 0000:00:1f.2 failed with error -22 Aug 12 17:02:36 satellita kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] Aug 12 17:02:36 satellita kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 Aug 12 17:02:36 satellita kernel: scsi0 : ata_piix Aug 12 17:02:36 satellita kernel: scsi1 : ata_piix Aug 12 17:02:36 satellita kernel: ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14 Aug 12 17:02:36 satellita kernel: ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15 ---snap--- So for me it looks like the ahci module is giving up and ata_piix is taking over. lsmod prints out: ---snip--- Aug 6 13:39:01 satellita kernel: sr0: CDROM not ready. Make sure there is a disc in the drive. sr_mod 17284 1 cdrom 33568 1 sr_mod sd_mod 27904 6 ata_piix 14148 6 ahci 22020 0 ata_generic 8324 0 libata 116624 3 ata_piix,ahci,ata_generic scsi_mod 137388 5 firewire_sbp2,sg,sr_mod,sd_mod,libata ---snap--- lspci shows: ---snip--- 00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03) ---snap--- kernel command line is: ---snip--- Aug 12 17:02:36 satellita kernel: Kernel command line: root=/dev/sda5 ro libata.atapi_enabled=1 ---snap--- So I have tried this libata.atapi_enabled=1 option, but this doesnt help. Any advice? Thanks Thomas -- Thomas Hahn == [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]