Hi, I am a young network administrator and i need you help. I have a wireless network to test on my bussiness and for that reason i bought the orinoco gold card (monitor mode and a good price). I have a Toshiba Laptop 2450 and a kernel 2.6.14.
Linux Seth 2.6.14 #1 SMP Fri Jan 20 11:34:25 CET 2006 i686 GNU/Linux I use the orinoco driver 0.15RC2 and i suppose the monitor patch is include on it. This is the resul of dmesg | grep orinoco orinoco 0.15rc2 (David Gibson <[EMAIL PROTECTED]>, Pavel Roskin <[EMAIL PROTECTED]>, et al) orinoco_cs 0.15rc2 (David Gibson <[EMAIL PROTECTED]>, Pavel Roskin <[EMAIL PROTECTED]>, et al) I thought it was a good beginning but i ve made a mistake. This is the result of lsmod : Module Size Used by snd_pcm_oss 56864 0 snd_mixer_oss 22912 4 snd_pcm_oss orinoco_cs 18056 1 pcmcia 44588 5 orinoco_cs joydev 13760 0 parport_pc 45380 0 parport 41288 1 parport_pc yenta_socket 31116 6 rsrc_nonstatic 17536 1 yenta_socket pcmcia_core 48408 3 pcmcia,yenta_socket,rsrc_nonstatic And in conclusion this is teh result of iwconfig : eth1 IEEE 802.11-DS ESSID:"My_Network" Nickname:"Seth" Mode:Managed Bit Rate:11 Mb/s RTS thr:off Encryption key:7365-6375-31 Security mode:open Link Quality:0 Signal level:134 Noise level:134 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 The ifconfig eth1 said me that : eth1 Lien encap:Ethernet HWaddr 00:02:2D:38:5B:F6 inet adr:192.168.1.12 Bcast:192.168.1.255 Masque:255.255.255.0 BROADCAST PROMISC MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interruption:3 Adresse de base:0xc100 But the result of this command : airmon start eth1 is eth1 HermesI orinocoSIOCSIFFLAGS: Périphérique ou ressource occupé (monitor mode enabled) And when i launch kismet , ive got that : Server options: none Client options: none Starting server... Waiting for server to start before starting UI... Suid priv-dropping disabled. This may not be secure. No specific sources given to be enabled, all will be enabled. Enabling channel hopping. Enabling channel splitting. Source 0 (HermesI): Enabling monitor mode for orinoco source interface eth1 channel 10... FATAL: channel get ioctl failed 16:Device or resource busy And in conclusion the result of iwpriv is: eth1 Available private ioctls : force_reset (8BE0) : set 0 & get 0 card_reset (8BE1) : set 0 & get 0 set_port3 (8BE2) : set 1 int & get 0 get_port3 (8BE3) : set 0 & get 1 int set_preamble (8BE4) : set 1 int & get 0 get_preamble (8BE5) : set 0 & get 1 int set_ibssport (8BE6) : set 1 int & get 0 get_ibssport (8BE7) : set 0 & get 1 int get_rid (8BE9) : set 0 & get 1024 byte Did somebody encounter the problem ?? Could you help me to find a solution to this problem ? When i used Whax distrib , it is ok : the card is on and kismet is ok ? Please help me to solve it ! I prefer to use Debian !! Thanks for you help !!! best regards PP P.s: Sorry, but english is not my native language !! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]