Hi, > I am a young network administrator and i need you help. I have a wireless network to test on my bussiness and for that reason i bought the orinoco gold card (monitor mode and a good price). I have a Toshiba Laptop 2450 and a kernel 2.6.14.
Linux Seth 2.6.14 #1 SMP Fri Jan 20 11:34:25 CET 2006 i686 GNU/Linux I use the orinoco driver 0.15RC2 and i suppose the monitor patch is include on it. > This is the resul of dmesg | grep orinoco > orinoco 0.15rc2 (David Gibson <[EMAIL PROTECTED]>, Pavel > Roskin <[EMAIL PROTECTED]>, et al) > orinoco_cs 0.15rc2 (David Gibson <[EMAIL PROTECTED]>, Pavel > Roskin <[EMAIL PROTECTED]>, et al) > > I thought it was a good beginning but i ve made a mistake. > > This is the result of lsmod : > > Module Size Used by > snd_pcm_oss 56864 0 > snd_mixer_oss 22912 4 snd_pcm_oss > orinoco_cs 18056 1 > pcmcia 44588 5 orinoco_cs > joydev 13760 0 > parport_pc 45380 0 > parport 41288 1 parport_pc > yenta_socket 31116 6 > rsrc_nonstatic 17536 1 yenta_socket > pcmcia_core 48408 3 pcmcia,yenta_socket,rsrc_nonstatic > > And in conclusion this is teh result of iwconfig : > > eth1 IEEE 802.11-DS ESSID:"My_Network" Nickname:"Seth" > Mode:Managed Bit Rate:11 Mb/s > RTS thr:off > Encryption key:7365-6375-31 Security mode:open > Link Quality:0 Signal level:134 Noise level:134 > Rx invalid nwid:0 invalid crypt:0 invalid misc:0 > > The ifconfig eth1 said me that : > > eth1 Lien encap:Ethernet HWaddr 00:02:2D:38:5B:F6 > inet adr:192.168.1.12 Bcast:192.168.1.255 > Masque:255.255.255.0 > BROADCAST PROMISC MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 lg file transmission:1000 > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > Interruption:3 Adresse de base:0xc100 > > > But the result of this command : airmon start eth1 is > eth1 HermesI orinocoSIOCSIFFLAGS: Périphérique ou > ressource occupé > (monitor mode enabled) > > And when i launch kismet , ive got that : > Server options: none > Client options: none > Starting server... > Waiting for server to start before starting UI... > Suid priv-dropping disabled. This may not be secure. > No specific sources given to be enabled, all will be enabled. > Enabling channel hopping. > Enabling channel splitting. > Source 0 (HermesI): Enabling monitor mode for orinoco source interface > eth1 channel 10... > FATAL: channel get ioctl failed 16:Device or resource busy > > And in conclusion the result of iwpriv is: > > > eth1 Available private ioctls : > force_reset (8BE0) : set 0 & get 0 > card_reset (8BE1) : set 0 & get 0 > set_port3 (8BE2) : set 1 int & get 0 > get_port3 (8BE3) : set 0 & get 1 int > set_preamble (8BE4) : set 1 int & get 0 > get_preamble (8BE5) : set 0 & get 1 int > set_ibssport (8BE6) : set 1 int & get 0 > get_ibssport (8BE7) : set 0 & get 1 int > get_rid (8BE9) : set 0 & get 1024 byte > > Did somebody encounter the problem ?? Could you help me to find a > solution to this problem ? When i used Whax distrib , it is ok : the > card is on and kismet is ok ? > Please help me to solve it ! I prefer to use Debian !! > Thanks for you help !!! > best regards > > PP > > P.s: Sorry, but english is not my native language !! > > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
