On Friday 12 August 2005 19:21, Chris Beggy wrote: > I'm failing to run a WG511 wireless CardBus card, with the latest prism54 > firmware and driver, on a Toshiba 2100. > > The prism54 seems to be loaded with hotplug. > > Is the problem with IRQ, pcmcia, PCI? > Restarting /etc/init.d/pcmcia or /etc/init.d/networking do not > fix things. The entry for the WG511 /etc/networks/interfaces > seems OK. The device gets recognized by iwconfig as sit0, which > seems strange. > > Here's some output from dmesg: > > Yenta: ISA IRQ mask 0x06b8, PCI irq 0 > Socket status: 30000020 > PCI: IRQ 0 for device 0000:00:13.1 doesn't match PIRQ mask - try > pci=usepirqmask PCI: No IRQ known for interrupt pin B of device > 0000:00:13.1. Please try using pci=biosirq. Yenta: CardBus bridge found at > 0000:00:13.1 [1179:0001] > Yenta: ISA IRQ mask 0x06b8, PCI irq 0 > Socket status: 30000020 > Loaded prism54 driver, version 1.2 > PCI: Enabling device 0000:01:00.0 (0000 -> 0002) > PCI: No IRQ known for interrupt pin A of device 0000:01:00.0. > Please try using pci=biosirq. This is your clue. Try using pci=biosirq and the problem should go away.
David > eth0: could not install IRQ handler > prism54: probe of 0000:01:00.0 failed with error -5 > > Thanks. > > Chris -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
