I'm failing to run a WG511 wireless CardBus card, with the latest prism54 firmware and driver, on a Toshiba 2100.
The prism54 seems to be loaded with hotplug. Is the problem with IRQ, pcmcia, PCI? Restarting /etc/init.d/pcmcia or /etc/init.d/networking do not fix things. The entry for the WG511 /etc/networks/interfaces seems OK. The device gets recognized by iwconfig as sit0, which seems strange. Here's some output from dmesg: Yenta: ISA IRQ mask 0x06b8, PCI irq 0 Socket status: 30000020 PCI: IRQ 0 for device 0000:00:13.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: No IRQ known for interrupt pin B of device 0000:00:13.1. Please try using pci=biosirq. Yenta: CardBus bridge found at 0000:00:13.1 [1179:0001] Yenta: ISA IRQ mask 0x06b8, PCI irq 0 Socket status: 30000020 Loaded prism54 driver, version 1.2 PCI: Enabling device 0000:01:00.0 (0000 -> 0002) PCI: No IRQ known for interrupt pin A of device 0000:01:00.0. Please try using pci=biosirq. eth0: could not install IRQ handler prism54: probe of 0000:01:00.0 failed with error -5 Thanks. Chris -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
