On 14 Apr 2004, [EMAIL PROTECTED] wrote:
Hello Jörg,
Thanks for your help
>
> #fdisk -l /dev/sda
This gives me a truely odd result
--8<------------------------schnipp------------------------->8---
fdisk -l /dev/sda
Disk /dev/sda: 1 MB, 1474560 bytes
1 heads, 3 sectors/track, 960 cylinders
Units = cylinders of 3 * 512 = 1536 bytes
Device Boot Start End Blocks Id System
/dev/sda1 ? 639983657 1263044256 934590898+ 61 SpeedStor
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(364, 109, 48) logical=(639983656, 0, 2)
Partition 1 has different physical/logical endings:
phys=(288, 99, 37) logical=(1263044255, 0, 1)
Partition 1 does not end on cylinder boundary.
/dev/sda2 ? 639749586 1195614002 833796624 75 PC/IX
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(99, 101, 32) logical=(639749585, 0, 3)
Partition 2 has different physical/logical endings:
phys=(369, 97, 44) logical=(1195614001, 0, 2)
Partition 2 does not end on cylinder boundary.
/dev/sda3 ? 179658763 645779734 699181456 0 Empty
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(10, 97, 13) logical=(179658762, 0, 3)
Partition 3 has different physical/logical endings:
phys=(288, 73, 15) logical=(645779733, 0, 1)
Partition 3 does not end on cylinder boundary.
/dev/sda4 ? 1820786 1820786 0 53 OnTrack DM6 Aux3
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(335, 83, 4) logical=(1820785, 0, 1)
Partition 4 has different physical/logical endings:
phys=(32, 32, 32) logical=(1820784, 0, 3)
Partition 4 does not end on cylinder boundary.
Partition table entries are not in disk order
--8<------------------------schnapp------------------------->8---
>
> which should list your partition table of your TEAC RemovableDisk
> and after this has run out successfully you should try something
> like
> #mdkir /mnt/usbdisk1 #mount /dev/sda1 /mnt/usbdisk1
Problem
/dev/sda1: Input/output error
mount: you must specify the filesystem type
So if I try to do this I get
mount -t ext3 /dev/sda1 /mnt/usbdisk1
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
or too many mounted file systems
Etc.
What is wrong?
Uwe
