On Wednesday 07 May 2003 17:53, Florian Struck wrote: > On Wednesday 07 May 2003 15:03, Emil Pedersen wrote: > > Espen Tagestad wrote: > > > On Wed, Apr 14, 2004 at 11:13:21PM +0200, Herbert Volkmann wrote: > > > > Hej guys! > > > > > > > > Does anybody know if it is possible to get a resolution of about > > > > 1400x1050 with an intel i830m chipset?? > > -Bigsnip- > > I got my sony vaio working on 1400x1050 without problems with following > monitor setting (modeline) in XF86Config-4 > (works for xfree 4.x, currently running 4.3) > Its a ati rage and a display wich seems to have a static resolution (means > it shows only little square in the middle of the screen when resolution too > low) > > snip from XF86Config-4: > > Section "Monitor" > Identifier "Generic Monitor" > HorizSync 31.5-100 > VertRefresh 40-100 > Option "DPMS" > ModeLine "1400x1050" 107.85 1400 1450 1500 1999 1050 1058 1070 1150 > EndSection > > Check your frequencies to be safe. > > Regards > Florian
Actually i just realized that my post didnt answer your question. Sorry i should read more carefully. But i use the opportunity and ask if someone got the ati framebuffer, only for the console, to work at 1400x1050 (on an ati rage mobility P/M). cause if i use the vesa framebuffer at 1280x1024 (or lower) my Xserver will start but only very messy and unusable (even if i use ati2 X module) That means i cant use a framebuffer console at the same time with xfree. But i would need it cause the tiny screen in the middle of my display running a standart console is rather frustrating. I hope someone understands my confused words =) (had a hard day) Any help welcome. regards Florian
