Renaud de Villemeur, 2003-Apr-17 22:55 +0200:
>
> Here is my /proc/devices file
> Character devices:
> 1 mem
> 2 pty
> 3 ttyp
> 4 ttyS
> 5 cua
> 7 vcs
> 10 misc
> 13 input
> 14 sound
> 29 fb
> 128 ptm
> 129 ptm
> 136 pts
> 137 pts
> 162 raw
> 180 usb
> 188 ttyUSB
>
> and the interrupt one.
> Block devices:
> 2 fduser@(none):/proc$ cat interrupts
> CPU0
> 0: 1032379 XT-PIC timer
> 1: 7186 XT-PIC keyboard
> 2: 0 XT-PIC cascade
> 9: 30417 XT-PIC usb-uhci, eth0
> 10: 26883 XT-PIC Allegro
> 12: 92067 XT-PIC PS/2 Mouse
> 14: 15047 XT-PIC ide0
> NMI: 0
> ERR: 0
Here's mine from my Dell Latitude CPx:
$ cat /proc/devices
Character devices:
1 mem
2 pty
3 ttyp
4 ttyS
5 cua
6 lp
7 vcs
10 misc
13 input
14 sound
29 fb
128 ptm
136 pts
162 raw
180 usb
188 ttyUSB
200 nlkcomm
202 cpu/msr
203 cpu/cpuid
254 pcmcia
Block devices:
2 fd
3 ide0
22 ide1
$ cat /proc/interrupts
CPU0
0: 108026961 XT-PIC timer
1: 322349 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 423595 XT-PIC Maestro3(i)
8: 23573258 XT-PIC rtc
11: 1416709 XT-PIC Texas Instruments PCI1225, Texas Instruments
PCI1225 (#2), usb-uhci, eth0
12: 2875368 XT-PIC PS/2 Mouse
14: 764395 XT-PIC ide0
15: 13032 XT-PIC ide1
NMI: 0
ERR: 52116
I don't see any "Block devices:" on your output. On mine, "ide0" is
my HDD (/dev/hda) and "ide1" is my CDROM drive. Also note my "pcmcia"
device, which I don't see on your output either.
What kernel are you using?
Are you sure the yenta module is the right one for your pcmcia
controller? That one is the replacement in 2.4 kernels for the i82365
controller. I don't know about the other one, PCIC?
As for the modem on the PCMCIA card, you need to have pcmica serial
card services enabled in the kernel to use that.
jc
--
Jeff Coppock Systems Engineer
Diggin' Debian Admin and User
