"blair" == blair kelly <[EMAIL PROTECTED]> writes: blair> Does anyone have an idea what the message that I get in blair> /etc/syslog when I insert the PCMCIA card for the CD-reader blair> means:
blair> : cardmgs[339]: get dev info on socket 0 failed: Resource blair> temporarily unavailable Shyamal Prasad <[EMAIL PROTECTED]> suggested: Shyamal> On my Sony VAIO N505VE I had to (config.opts) Shyamal> Shyamal> exclude irq5 Shyamal> exclude irq7 Shyamal> exclude irq9 Shyamal> Shyamal> and also (/etc/pcmcia or ????) Shyamal> Shyamal> PCIC_OPTS="irq_list=10,11 has_ring=0" Shyamal> Shyamal> to get my PCMCIA driver to work. On the CD-ROM I had to set it to boot Shyamal> mode "boot" as opposed to "cardbus" but you probably already knew Shyamal> that. Shyamal> Shyamal> See if this helps....this is all with the i82365 driver, but the same Shyamal> files worked with yenta socket as far as I remember. I'm sorry I am Shyamal> not able to lookup my laptop right now, this if from notes I have. If Shyamal> you need more information just ask. I tried the suggestion Shyamal, but nothing seemed to change. I have done some more looking around and have found that /etc/pcmcia/config contains : card "Ninja ATA" : version " ", "NinjaATA-" : bind "ide_cs" which explains why I keep seeing "ide_cs" when I insert the card for the Sony PCGA-CD51 CD-ROM drive. If I do /etc/init.d/pcmcia restart, I see : cardmgr[990]: executing: 'modprobe -r ide_cs' : cardmgr[990]: exiting : kernel: unloading PCMCIA Card Services : kernel: Linux PCMCIA Card Services 3.1.34 : kernel: kernel build: 2.4.18-686 unknown : kernel: options: [pci] [cardbus] [apm] : kernel: Intel ISA/PCI/CardBus PCIC probe: : kernel: PCI: Found IRQ 9 for device 00:0c.0 : kernel: PCI: Sharing IRQ 9 with 00:0a.0 : kernel: Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:0c, mem 0x10000000 : kernel: host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 168/176] [bus 2/5] : kernel: ISA irqs (default) = 3,4,5,7,10,11,12,15 PCI status changes : cardmgr[1055]: starting, version is 3.1.33 : cardmgr[1055]: watching 1 sockets : cardmgr[1055]: Card Services release does not match And then when I insert the card: : kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. : cardmgr[990]: socket 0: Ninja ATA : cardmgr[990]: executing: 'modprobe ide_cs' : cardmgr[990]: get dev info on socket 0 failed: Resource temporarily unavailable As I said nothing changes if I follow the suggestions of Shyamal. Other suggestions, please? Blair
