Hi, > > cardmgr is supposed to first identify and beep, then configure and beep. > > But there is only one low beep, meaning that identifying failed. Is > > there a way i can force drivers, or identification? cardmgr says: > > > > cs: cb_alloc(bus 2): vendor 0x10ec, device 0x8139
I have the same card, had the same problem with the stock pcmcia-cs sources. My card is a cheap no-name "AllNet ALL0142+" that could not be identified by cardmgr. giedi:/var/log# cardctl ident Socket 0: no product info available Socket 1: product info: "PCMCIA", "Fast-Ethernet", "", "" manfid: 0xffff, 0x1090 function: 6 (network) Important are the product info and manfid lines. I had to manually add the following lines to /etc/pcmcia/config: card "PCMCIA Fast-Ethernet" version "PCMCIA", "Fast-Ethernet" manfid 0xffff, 0x1090 bind "axnet_cs" After restarting pcmcia services the card was recognized. The puzzle was how the card could be identified by cardmgr through version and manfid strings and binding the axnet_cs driver to it. The "card" line can consist of an arbitrary string like "ASIX AX88190 based card". There already several entries for a Asix AX88190-based card in /etc/pcmcia/config; try to build one yourself that matches the information from "cardctl ident" output, especially manfid and version. Restart pcmcia and hopefully the card gets identified. Regards, Frank -- ------------------------------------------------------------- Frank Trenkamp ftrenkam at uos.de PGP fprt: 5A0C 4AE9 74A5 51F0 2D34 E7DC 67FF 32C4 0357 5653 ------------------------------------------------------------- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
