This one time, at band camp, Johan Ehnberg said: > Thanks, this helps me on the way. pcmcia-cs is set up durinf setup. The > cardmgr is supposed to first identify and beep, then configure and beep. > But there is only one low beep, meaning that identifying failed. Is > there a way i can force drivers, or identification? cardmgr says: > > cs: cb_alloc(bus 2): vendor 0x10ec, device 0x8139
http://pcmcia-cs.sourceforge.net/ftp/SUPPORTED.CARDS has the list of all supported cards, as well as the driver they use. You may also want to go through the PCMCIA HOWTO, availale at: http://pcmcia-cs.sourceforge.net/ftp/doc/PCMCIA-HOWTO.html IIRC, I had to exclude some ranges being scanned to get my card recognized properly every time. Check out syslog and messages for clues as to what's flling over. Write back with details if you need more help. Steve -- "Life sucks, but death doesn't put out at all...." -- Thomas J. Kopp
pgpEnk8Lsb0Rq.pgp
Description: PGP signature
