I have a Dell Lattitude CP with a Xircom 33k6 Eth/modem combo. I installed slink with no problems. The card is recognised and configured properly and the ethernet device works. Problem is the modem. I can see no errors in the syslog file (attached), but sending ATZ to the modem has no effect. I read some HOWTO's and README files, but have not found the problem or the solution.
Does this ring a bell to you, or have you got any suggestions where to look? please tell me! Greating, Ben Mesman. --- Part of syslog --- Nov 5 09:15:07 nl1019 cardmgr[103]: starting, version is 3.0.5 Nov 5 09:15:07 nl1019 cardmgr[103]: watching 2 sockets Nov 5 09:15:07 nl1019 kernel: cs: IO port probe 0x1000-0x17ff: excluding nothing: probe failed. Nov 5 09:15:07 nl1019 kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x210-0x217 0x220-0x22f 0x290-0x297 0x378-0x37f 0x388-0x38f 0x4d0-0x4d7 Nov 5 09:15:07 nl1019 kernel: cs: IO port probe 0x0a00-0x0aff: clean. Nov 5 09:15:07 nl1019 kerneld: started, pid=110, qid=0 Nov 5 09:15:07 nl1019 cardmgr[103]: initializing socket 0 Nov 5 09:15:07 nl1019 kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Nov 5 09:15:07 nl1019 cardmgr[103]: socket 0: Xircom CEM33 Ethernet/Modem Nov 5 09:15:07 nl1019 cardmgr[103]: executing: 'insmod /lib/modules/2.0.36/pcmcia/xirc2ps_cs.o' Nov 5 09:15:07 nl1019 kernel: xirc2ps_cs.c 1.29 1998/04/27 19:20:19 (dd9jn+kvh) Nov 5 09:15:07 nl1019 cardmgr[103]: executing: 'insmod /lib/modules/2.0.36/pcmcia/serial_cs.o' Nov 5 09:15:07 nl1019 kernel: eth0: Xircom: port 0x2d0, irq 3, hwaddr 00:80:C7:74:30:DC Nov 5 09:15:07 nl1019 kernel: tty03 at 0x02e8 (irq = 3) is a 16450 Nov 5 09:15:07 nl1019 cardmgr[103]: executing: './network start eth0' Nov 5 09:15:09 nl1019 kernel: eth0: switching to 10BaseT port Nov 5 09:15:09 nl1019 kernel: eth0: media 10Base2, silicon revision 1 Nov 5 09:15:10 nl1019 kernel: eth0: media 10Base2, silicon revision 1 Nov 5 09:15:10 nl1019 cardmgr[103]: executing: './serial start ttyS3' Nov 5 09:20:50 nl1019 kernel: registered device ppp0 Nov 5 09:20:50 nl1019 pppd[192]: pppd 2.3.5 started by root, uid 0 Nov 5 09:20:51 nl1019 chat[193]: abort on (BUSY) Nov 5 09:20:51 nl1019 chat[193]: abort on (NO CARRIER) Nov 5 09:20:51 nl1019 chat[193]: abort on (VOICE) Nov 5 09:20:51 nl1019 chat[193]: abort on (NO DIALTONE) Nov 5 09:20:51 nl1019 chat[193]: abort on (NO ANSWER) Nov 5 09:20:51 nl1019 chat[193]: send (ATZ^M) Nov 5 09:20:51 nl1019 chat[193]: expect (OK) Nov 5 09:21:36 nl1019 chat[193]: alarm Nov 5 09:21:36 nl1019 chat[193]: Failed Nov 5 09:21:36 nl1019 pppd[192]: Connect script failed Nov 5 09:21:37 nl1019 pppd[192]: Exit. ---End---
