/etc/lilo.conf:
boot=/dev/hda install=/boot/cboot.b message=/boot/splash.lilo timeout=300 map=/boot/map prompt fix-table lba32 read-only disk=/dev/hda bios=0x80 image=/vmlinuz label=Debian_2.6.4 vga=0xf04 root=/dev/hda2 initrd=/boot/initrd-2.6.4-1-686.gz append="rw acpi=on " image=/vmlinuz label=Safe_Video_Mode vga=0xf04 root=/dev/hda2 initrd=/boot/initrd-2.6.4-1-686.gz append="3 rw acpi=on " image=/vmlinuz label=Debian_2.4.22 vga=0xf04 root=/dev/hda2 initrd=/boot/initrd-2.4.22-x1.gz append="rw acpi=on " image=/vmlinuz label=Safe_2.4.22 vga=0xf04 root=/dev/hda2 initrd=/boot/initrd-2.4.22-x1.gz append="3 rw acpi=on " image=/vmlinuz label=Expert vga=normal root=/dev/hda2 initrd=/boot/initrd-2.6.4-1-686.gz append="single rw acpi=on "
Output of mount command:
/dev/ide/host0/bus0/target0/lun0/part2 on / type reiserfs (rw)
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
usbdevfs on /proc/bus/usb type usbdevfs (rw,devmode=0666)
automount(pid671) on /var/autofs/floppy.1 type autofs (rw,fd=4,pgrp=671,minproto=2,maxproto=9)
automount(pid663) on /var/autofs/cdrom.1 type autofs (rw,fd=4,pgrp=663,minproto=2,maxproto=9)
/dev/floppy/0 on /mnt/fd0 type minix (rw,nosuid,nodev)
Output of fdisk -l (three times, for hda, hda1 and hda2):
Disk /dev/hda: 14.1 GB, 14135869440 bytes 240 heads, 63 sectors/track, 1826 cylinders Units = cylinders of 15120 * 512 = 7741440 bytes
Device Boot Start End Blocks Id System /dev/hda1 1 68 514048+ 82 Linux swap /dev/hda2 * 69 1826 13290480 83 Linux
Disk /dev/hda1: 526 MB, 526385664 bytes 240 heads, 63 sectors/track, 67 cylinders Units = cylinders of 15120 * 512 = 7741440 bytes
Device Boot Start End Blocks Id System
Disk /dev/hda2: 13.6 GB, 13609451520 bytes 240 heads, 63 sectors/track, 1758 cylinders Units = cylinders of 15120 * 512 = 7741440 bytes
Device Boot Start End Blocks Id System
s. keeling wrote:
Perhaps you should post your /etc/lilo.conf, the output of "mount" (in the running Xandros), and perhaps "fdisk -l /dev/your_boot_drive".
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]