Bonjour,
Je me suis lancé dans l'apprentissage de Perl (je n'y connaissais
absolument rien).
Voici donc une nouvelle version du script de Martin.
nouvelles fonctions (celles dont j'avais besoin) :
- demande un nom de paquet, si celui-ci n'est ni fourni pas le ddts ni
trouve avec « apt-cache », après avoir affiché la description complète ;
- variable $selfsend, si elle vaut "yes" (attention, c'est la valeur que
j'utilise et qui est donc dans le script que je vous envoie), lors de
l'envoie des correction, une copie vous est adressée ;
- lors de l'analyse du rapport, je récupère dans l'en-tête le champ
« Message-Id: » et j'ajoute un champ « In-Reply-To: » dans les
messages envoyés. Cela permet de créer un fil de discussion pour les
MUA qui savent s'en servir (mutt, et certainement d'autres).
à faire (toujours pour moi) :
- utiliser par exemple « >> » (si quelqu'un a une meilleure idée je
prends) en début de ligne pour indiquer des commentaires dans
NomDuPaquet.relu (plus facile à utiliser que les « -- BEGIN COMMENTS »
et « -- END COMMENTS »
Si vous avez des idées, remarques, etc. je suis preneur. Mais la mise en
oeuvre pourra prendre du temps, car je le répète, je débute en Perl.
Martin : regarde la section « AUTHORS » à la fin, je ne pense pas que ce
que j'ai fait soit l'usage, donc je prends les corrections.
a+
Nicolas
--
#! /usr/bin/perl
use strict;
### Config part
# where to put all the files
# Things you MUST change
my $home="/home/nico/Mail/rel/ddts/";
my $mail_from='Nicolas Bertolissio <[EMAIL PROTECTED]>';
my $mail_dflt="Bonjour,\n\n"
."Tu trouvera en attachement une version corrigée par mes soins de la
description de ce paquet,\n"
."ainsi qu'un diff entre la version que tu as soumise et ma version. Si tu es
d'accord avec les\n"
."corrections, merci de renvoyer la version corrigée au ddts. Dans le cas
contraire, n'hesite pas\n"
."a me recontacter.\n\n"
."a+\n\nNicolas\n";
# Things you can change
my $debug=0; # level of verbosity 0..2
my $seftsend="yes"; # if set to "yes", you will be sent a copy of
outgoing mails
my $mail_title="[relecture] %s"; # must contain %s
my $mail_enc="8bits";
my $mail_charset="iso-8859-1";
my $todoext="todo"; # extention of files waiting for a review (*)
my $revext="relu"; # extention of files you already reviewed
my $newmailext="newmail"; # extention of newly created mail files (*)
my $mailext="mail"; # extention of ready to be sent mail files
my $sentmailext="mailSent"; # extention of mails sent (*)
# files in category marked with (*) are automatically generated.
# Don't edit them, change there name before it.
### End of the config part
=head1 NAME
ddts-rev - a tool to ease the work of reviewer of ddts
=head1 SYNOPSIS
ddts-rev [parse|mail|clean]
=head1 DESCRIPTION
This program helps the reviewer of package description translation with the
ddts.
Here is the basical review process if you use this tool:
=over 4
=item o You get a daily report from the ddts, containing changed translations.
Pass this mail to the standard input of this script, providing the I<parse>
option.
It will create two files called I<pkg-name> and I<pkg-name.todo> for each
translation
in the mail. The first one is the unchanged translation, for internal use.
The second is a template to ease your review.
=item o You do your review
For that, rename I<pkg-name.todo> to I<pkg-name.relu>. Then, change the
description
found there, and add any comments you want between the lines
--BEGIN COMMENTS [don t change this line]
and
--END COMMENTS [don t change this line]
=item o You're done with the review and want to send your work to translators
back.
Call the script with the I<mail> option. It will make a diff of your version
and
the translators one. If the two versions are equal, nothing will be done. Else,
the script will send a mail in mime format with three parts:
=over 4
=item - the comments you've put between the COMMENTS lines
=item - the version resulting of your review
Just in case the translator lost it's original work
=item - the diff between your version and the translator one.
=back
Then, the script will show you the resulting mail, and prompt you if you want
to
send it or not. Be carfull with sending mails. Please make sure you are really
done with the review before.
Lastly, the script will save the sent mail to I<pkg-name.mailSent> to make sure
the mail won't be sent several times if you run the script several times.
=item o clean your workspace
Calling the script with the I<clean> option removes all temp files like *~ ones,
or the ones created internally. If I<pkg-name.todo> and I<pkg-name.relu> both
exists, the script will remove the first. So, be carfull when using this
option...
=back
=cut
my $version="0.8";
if (! -d $home) {
mkdir $home || die "Can't create $home. Is the script configured?\n";
}
sub parse_report {
my $package; # package name
my $translator; # translator address
my $desc; # english description
my $trans; # translated description
my $lang; # language translated into
my $reportid; # ddts report mail Id
# Read the mail header
# Get the 'Message-Id:' field so we can use 'In-Reply-To:' when sending
email
while (<>) {
last if (m,^$,);
if (m,^Message-Id: ,) {
chomp($reportid = substr($_, 12));
$debug && print "Message-Id: $reportid\n";
}
}
# Read all packages
while (<>) {
# Read the translator name
chomp;
$translator=$_;
$debug && print "Translator: $translator\n";
last if $translator eq "";
# Read the package name
$_=<>; chomp;
$package=$_;
$debug && print "Package: $package\n";
$_=<>;
# Read the english description
if (m,^Description: (.*)$,) {
$desc="$1\n";
while (<>) {
if (m,^ ,) {
$desc .= $_;
} else {
last;
}
}
}
$debug>1 && print "Description: $desc\n";
# Read the translated description
if (m,^Description-(..)(_..)?: (.*)$,) {
$lang="$1$2";
$trans="$3\n";
while (<>) {
if (m,^ ,) {
$trans .= $_;
} else {
last;
}
}
}
if (m,^$,) {
# Search for package name if not provided by ddts
if ($package eq "") {
my $shortdesc=$desc;
$shortdesc =~ s/\n.*//mg;
open APT, "apt-cache search '$shortdesc'|";
$package = <APT>;
chomp($package);
$package =~ s/^([^ ]*) .*$/$1/;
if ($package eq "") {
print "I guess '$shortdesc' referes to '$package'\n";
} else {
print "I can't guess '$shortdesc'\nHere is the full
description:\n$desc Please enter a package name: ";
$package=<STDIN>;
}
}
if ($package eq "" ||
$translator eq "" ||
$desc eq "" ||
$trans eq "" ||
$lang eq "") {
die "Parse error: empty line before the package is well
defined.\n"
."Are you sure I'm parsing a repport from the ddts ?\n";
}
if (-e "$home/$package.$todoext") {
warn "$home/$package.$todoext overwritten...\n";
}
# Outputs the package
open PKG, ">$home/$package"
|| die "Can't open $home/$package\n";
open TODO, ">$home/$package.$todoext"
|| die "Can't open $home/$package.$todoext\n";
my $str = "Translator: $translator\n";
$str .= "ddts Id: $reportid\n";
$str .= "Description:$desc";
$str .= "Description-$lang:$trans";
$debug>1 && print "$str\n";
print PKG "$str\n";
print TODO "--BEGIN COMMENTS [don t change this line]\n"
.$mail_dflt
."--END COMMENTS [don t change this line]\n"
."$str\n";
close PKG || die "Can't write '$home/$package': $!\n";
close TODO || die "Can't write '$home/$package.$todoext': $!\n";
# Remove the mailSent
if (-e "$home/$package.$sentmailext") {
print "removing $package.$sentmailext";
unlink "$home/$package.$sentmailext";
}
# Move revext to revext.old
if (-e "$home/$package.$sentmailext") {
print "Moving $package.$revext -> $package.$revext.old";
system ("mv $package.$revext $package.$revext.old");
}
# clears the variables
$package=$translator=$desc=$trans=$lang = "";
}
# stop when encountering the signature
last if m,^--$,;
last if m,^-- $,;
}
}
sub make_mails {
my $boundary;
my $BCount=0;
die "Cannot read the content of $home: $! \n"
unless opendir (PKGLIST,$home);
chdir $home || die "Can't chdir to $home: $!\n";
foreach (readdir(PKGLIST)) {
next if /\.$todoext$/;
next if /\.$revext$/;
next if /\.diff$/;
next if /\.$newmailext$/;
next if /\.$mailext$/;
next if /\.$sentmailext$/;
my $pkg = $_;
if (-e "$pkg.$revext" && -e "$pkg") {
if (-e "$pkg.$sentmailext") {
print "$pkg.$sentmailext exists. I won't send the same mail
twice\n";
next;
}
$boundary="----------=_".scalar(time)."-$$-".$BCount++;
# get translator name
open PKG, "$pkg" || die "Can't read $pkg\n";
chomp(my $translator=<PKG>); $translator =~ s/Translator: //;
chomp(my $reportid=<PKG>); $reportid =~ s/ddts Id: //;
close PKG;
# build the mail
my $mail = "From: $mail_from\n";
if ($debug) {
$mail .= "To: $mail_from\n";
} else {
$mail .= "To: $_\n";
}
if ($selfsend eq "yes") {
$mail .= "To: $mail_from\n";
}
$mail .= "Subject: ";
$mail .= sprintf $mail_title,$pkg;
$mail .= "\nIn-Reply-To: $reportid\n";
$mail .= "Mime-Version: 1.0\n"
."Content-Type: multipart/mixed; boundary=\"$boundary\"\n"
."Content-Disposition: inline\n"
."Content-Transfer-Encoding: $mail_enc\n"
."User-Agent: ddts review helper\n\n\n"
."--$boundary\n"
."Content-Type: text/plain; charset=$mail_charset\n"
."Content-Disposition: inline\n"
."Content-Transfer-Encoding: $mail_enc\n\n";
open REV, "$pkg.$revext";
while (<REV>) {
last if /^--BEGIN COMMENTS \[don t change this line\]$/;
}
while (<REV>) {
last if /^--END COMMENTS \[don t change this line\]$/;
$mail .= $_;
}
$mail .= "\n\n"
."--$boundary\n"
."Content-Type: text/plain; charset=$mail_charset\n"
."Content-Disposition: attachment; filename=\"$pkg.new\"\n\n";
# Prepare the diff and add the new version to the mail
open TMP,">$pkg.new";
while (<REV>) {
print TMP $_;
$mail .= $_;
}
close REV;
close TMP;
$mail .= "\n\n"
."--$boundary\n"
."Content-Type: text/plain; charset=$mail_charset\n"
."Content-Disposition: attachment; filename=\"$pkg.diff\"\n\n";
if (!system "diff -u $pkg $pkg.new > $pkg.diff") {
# empty diff
unlink "$pkg.diff";
unlink "$pkg.new";
} else {
# puts the diff
open DIFF, "$pkg.diff";
while (<DIFF>) {
$mail .= "$_";
}
close DIFF;
# Ends the mime stuff
$mail .= "--$boundary--\n\n";
print "Here is the mail:\n$mail\nDo you want to send it [y/N]
?\n";
$_=<>;
if (m/^[yY]/) {
open SENT, ">$pkg.$sentmailext";
print SENT $mail;
close SENT
|| die "Can't save the mail to $pkg.$sentmailext: $!\n";
open SENDMAIL,"| /usr/lib/sendmail -t -oi -oem";
print SENDMAIL $mail;
close SENDMAIL
|| die "Can't run sendmail: $!\n";
print "Mail sent\n";
} else {
print "As you want. Nothing sent\n";
}
}
unlink "$pkg.new" unless $debug>1;
unlink "$pkg.diff" unless $debug>1;
}
}
}
sub clean {
die "Cannot read the content of $home: $! \n"
unless opendir (PKGLIST,$home);
foreach (readdir(PKGLIST)) {
if (/~$/ ||
/\.new$/ ||
/\.diff$/) {
print "Remove $_\n";
unlink "$home/$_";
}
if (! /\./) {
my $pkg = $_;
if (-e "$home/$pkg.$revext" && -e "$home/$pkg.$todoext") {
print "Remove $pkg.$todoext\n";
unlink "$home/$pkg.$todoext";
}
}
}
}
my $cmd=shift;
if ($cmd eq "parse") {
parse_report();
} elsif ($cmd eq "mail") {
make_mails();
} elsif ($cmd eq "clean") {
clean();
} else {
my $me=$0;
$me=~s,^.*?/([^/]*)$,$1,;
die "Usage $me [parse|mail|clean]\n"
." parse: read a ddts from the standard input and change the files in
$home\n"
." mail: create the pkg.newmail files which you should edit and send\n"
." clean: remove : \n"
." - *~\n"
." - the $todoext when a $revext exists\n"
." - all tmp files (.diff, .new)\n"
."\n$me version $version\n";
}
=head1 AUTHORS
until version 0.7: Martin Quinson <[EMAIL PROTECTED]>
present maintainer: Nicolas Bertolissio <[EMAIL PROTECTED]>
=cut
