Package: src:linux
Version: 3.10.3-1
Severity: normal
Dear Maintainer,
Running almost entirely jessie/testing I installed linux-image-3.10-1-amd64
from unstable. When using it and mounting my autofs mounting NFSv3 volume it
hangs for around 15 seconds then mounts. This is recorded in syslog when
mounting right after a reboot:
Aug 2 20:46:36 neroon kernel: [ 132.580086] NFS: Registering the id_resolver
key type
Aug 2 20:46:36 neroon kernel: [ 132.580097] Key type id_resolver registered
Aug 2 20:46:36 neroon kernel: [ 132.580099] Key type id_legacy registered
<... hang happens here ...>
Aug 2 20:46:51 neroon kernel: [ 147.595379] RPC: AUTH_GSS upcall timed out.
Aug 2 20:46:51 neroon kernel: [ 147.595379] Please check user daemon is
running.
I don't have kerberos installed and am using default sec settings. Here are my
fstab lines for the mount point.
nfs:/share/public /share/public nfs
noauto,user,nfsvers=3,nosuid,nolock,hard,intr,timeo=20,rw 0 0
Here is the export line on the file server.
/share/public
192.168.1.0/255.255.1.0(rw,sync,all_squash,no_subtree_check,insecure)
If I switch back to the linux-image-3.9-1-amd64 package (3.9.8-1, the latest in
testing) the hang and timout error go away.
Hope this helps.
-- Package-specific info:
** Version:
Linux version 3.10-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3
(Debian 4.7.3-6) ) #1 SMP Debian 3.10.3-1 (2013-07-27)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.10-1-amd64
root=UUID=dc171262-c237-4d38-9e6a-cee8f7e51bb9 ro quiet i915.i915_enable_rc6=1
i915.i915_enable_fbc=1 i915.lvds_downclock=1 ipv6.disable=1 enable_mtrr_cleanup
mtrr_spare_reg_nr=1 epb=7 drm.vblankoffdelay=1
** Not tainted
** Kernel log:
[ 2.240629] usb 3-1.2.2: New USB device found, idVendor=1852, idProduct=db96
[ 2.240633] usb 3-1.2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.240636] usb 3-1.2.2: Product: NuForce \xffffffc2\xffffffb5DAC 2
[ 2.240638] usb 3-1.2.2: Manufacturer: NuForce, Inc.
[ 2.264954] media: Linux media interface: v0.10
[ 2.267356] Linux video capture interface: v2.00
[ 2.279585] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.290272] usbcore: registered new interface driver usbhid
[ 2.290276] usbhid: USB HID core driver
[ 2.306028] input: NuForce, Inc. NuForce \xffffffc2\xffffffb5DAC 2 as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.0/input/input6
[ 2.306215] hid-generic 0003:1852:DB96.0001: input,hidraw0: USB HID v1.00
Device [NuForce, Inc. NuForce \xffffffc2\xffffffb5DAC 2] on
usb-0000:00:1a.0-1.2.2/input0
[ 2.314843] usb 3-1.2.4: new low-speed USB device number 6 using ehci-pci
[ 2.326251] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[ 2.328210] input: Integrated Camera as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input7
[ 2.328428] usbcore: registered new interface driver uvcvideo
[ 2.328430] USB Video Class driver (1.1.1)
[ 2.339591] usbcore: registered new interface driver snd-usb-audio
[ 2.342613] fbcon: inteldrmfb (fb0) is primary device
[ 2.413110] usb 3-1.2.4: New USB device found, idVendor=047d, idProduct=2041
[ 2.413111] usb 3-1.2.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.413112] usb 3-1.2.4: Product: Kensington Slimblade Trackball
[ 2.413113] usb 3-1.2.4: Manufacturer: Kensington
[ 2.456036] input: Kensington Kensington Slimblade Trackball as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.4/3-1.2.4:1.0/input/input8
[ 2.456158] kensington 0003:047D:2041.0002: input,hidraw1: USB HID v1.10
Mouse [Kensington Kensington Slimblade Trackball] on
usb-0000:00:1a.0-1.2.4/input0
[ 2.487086] usb 3-1.2.5: new full-speed USB device number 7 using ehci-pci
[ 2.551996] i2400m_usb 4-1.3:1.0: WiMAX interface wmx0 (00:1d:e1:48:55:75)
ready
[ 2.553915] i2400m_usb 4-1.3:1.0: firmware: agent aborted loading
i6050-fw-usb-1.5.sbcf (not found?)
[ 2.553953] i2400m_usb 4-1.3:1.0: Could not find a usable firmware image
[ 2.553955] i2400m_usb 4-1.3:1.0: cannot bootstrap device: -2
[ 2.582614] usb 3-1.2.5: New USB device found, idVendor=05f3, idProduct=0081
[ 2.582617] usb 3-1.2.5: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.582618] usb 3-1.2.5: Product: Kinesis Keyboard Hub
[ 2.582619] usb 3-1.2.5: Manufacturer: PI Engineering
[ 2.582956] i2400m_usb 4-1.3:1.0: cannot setup device: -2
[ 2.582971] i2400m_usb: probe of 4-1.3:1.0 failed with error -2
[ 2.583223] usbcore: registered new interface driver i2400m_usb
[ 2.583276] hub 3-1.2.5:1.0: USB hub found
[ 2.583849] hub 3-1.2.5:1.0: 4 ports detected
[ 2.821371] Console: switching to colour frame buffer device 170x48
[ 2.827658] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.827660] i915 0000:00:02.0: registered panic notifier
[ 2.860692] usb 3-1.2.5.2: new full-speed USB device number 8 using ehci-pci
[ 2.893268] acpi device:01: registered as cooling_device4
[ 2.893404] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 2.893474] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 2.893711] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.963014] usb 3-1.2.5.2: New USB device found, idVendor=05f3,
idProduct=0007
[ 2.963023] usb 3-1.2.5.2: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 2.966996] input: HID 05f3:0007 as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.5/3-1.2.5.2/3-1.2.5.2:1.0/input/input10
[ 2.967113] hid-generic 0003:05F3:0007.0003: input,hidraw2: USB HID v1.00
Keyboard [HID 05f3:0007] on usb-0000:00:1a.0-1.2.5.2/input0
[ 2.980576] input: HID 05f3:0007 as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2.5/3-1.2.5.2/3-1.2.5.2:1.1/input/input11
[ 2.980689] hid-generic 0003:05F3:0007.0004: input,hidraw3: USB HID v1.00
Device [HID 05f3:0007] on usb-0000:00:1a.0-1.2.5.2/input1
[ 2.985541] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id:
0x1e2b1, caps: 0xd001a3/0x940300/0x120c00, board id: 1611, fw id: 774180
[ 2.985551] psmouse serio1: synaptics: serio: Synaptics pass-through port at
isa0060/serio1/input0
[ 3.037771] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input12
[ 3.404995] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 3.451147] EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
[ 3.560762] device-mapper: uevent: version 1.0.3
[ 3.560813] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised:
dm-de...@redhat.com
[ 3.620891] bio: create slab <bio-1> at 1
[ 3.734988] Adding 5105660k swap on /dev/mapper/cryptswap1. Priority:-1
extents:1 across:5105660k SS
[ 3.787346] fuse init (API version 7.22)
[ 3.793185] loop: module loaded
[ 3.828786] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 4.044972] RPC: Registered named UNIX socket transport module.
[ 4.044975] RPC: Registered udp transport module.
[ 4.044976] RPC: Registered tcp transport module.
[ 4.044978] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.048613] FS-Cache: Loaded
[ 4.049124] Key type dns_resolver registered
[ 4.054313] FS-Cache: Netfs 'nfs' registered for caching
[ 4.061347] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 4.357470] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[ 4.461550] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
[ 5.346967] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input13
[ 6.633627] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10
00 64
[ 7.278601] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 8.215364] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e,
buttons: 3/3
[ 8.473935] input: TPPS/2 IBM TrackPoint as
/devices/platform/i8042/serio1/serio2/input/input14
[ 9.838179] e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang:
[ 9.838179] TDH <0>
[ 9.838179] TDT <1>
[ 9.838179] next_to_use <1>
[ 9.838179] next_to_clean <0>
[ 9.838179] buffer_info[next_to_clean]:
[ 9.838179] time_stamp <fffee2bc>
[ 9.838179] next_to_watch <0>
[ 9.838179] jiffies <fffee49f>
[ 9.838179] next_to_watch.status <0>
[ 9.838179] MAC Status <80080>
[ 9.838179] PHY Status <7949>
[ 9.838179] PHY 1000BASE-T Status <0>
[ 9.838179] PHY Extended Status <3000>
[ 9.838179] PCI Status <10>
[ 11.509345] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 132.580086] NFS: Registering the id_resolver key type
[ 132.580097] Key type id_resolver registered
[ 132.580099] Key type id_legacy registered
[ 147.595379] RPC: AUTH_GSS upcall timed out.
[ 147.595379] Please check user daemon is running.
** Model information
sys_vendor: LENOVO
product_name: 4286CTO
product_version: ThinkPad X220
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: 8DET42WW (1.12 )
board_vendor: LENOVO
board_name: 4286CTO
board_version: Not Available
** Loaded modules:
rpcsec_gss_krb5
nfsv4
ecb
autofs4
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
cpufreq_stats
binfmt_misc
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
sbs
sbshc
loop
fuse
ecryptfs
sha256_generic
dm_crypt
dm_mod
joydev
hid_kensington
uvcvideo
i2400m_usb
snd_usb_audio
snd_usbmidi_lib
snd_hwdep
snd_pcm_oss
snd_mixer_oss
i2400m
videobuf2_vmalloc
hid_generic
wimax
snd_pcm
usbhid
hid
videobuf2_memops
videobuf2_core
videodev
media
snd_page_alloc
thinkpad_acpi
nvram
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
snd_seq_device
snd_timer
arc4
iwldvm
mac80211
tpm_tis
i915
snd
tpm
wmi
mperf
coretemp
battery
video
ac
button
tpm_bios
iTCO_wdt
iTCO_vendor_support
soundcore
drm_kms_helper
drm
iwlwifi
i2c_algo_bit
kvm
lpc_ich
processor
mfd_core
psmouse
i2c_i801
cfg80211
i2c_core
microcode
rfkill
serio_raw
pcspkr
evdev
mei_me
mei
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
ablk_helper
cryptd
lrw
gf128mul
glue_helper
ahci
libahci
libata
xhci_hcd
scsi_mod
ehci_pci
ehci_hcd
thermal
thermal_sys
sdhci_pci
sdhci
mmc_core
usbcore
usb_common
e1000e
ptp
pps_core
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
iface zack inet dhcp
wpa-driver wext
wpa-ssid zack
wpa-psk ***********
iface janrain inet dhcp
wpa-driver wext
wpa-ssid Janrain_VAP2_N
wpa-psk ****************
iface wlan0 inet manual
wpa-driver wext
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
iface default inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether f0:de:f1:62:26:23 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.42/24 brd 192.168.1.255 scope global eth0
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 64:80:99:33:a1:64 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
eth0: 2833239 2080 0 0 0 0 0 0 133667
1369 0 0 0 0 0 0
lo: 3736 52 0 0 0 0 0 0 3736
52 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
2123 total packets received
0 forwarded
0 incoming packets discarded
2121 incoming packets delivered
1399 requests sent out
145 dropped because of missing route
Icmp:
16 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 16
16 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 16
IcmpMsg:
InType3: 16
OutType3: 16
Tcp:
20 active connections openings
1 passive connection openings
10 failed connection attempts
0 connection resets received
0 connections established
1973 segments received
1292 segments send out
0 segments retransmited
0 bad segments received.
10 resets sent
Udp:
88 packets received
16 packets to unknown port received.
0 packet receive errors
105 packets sent
UdpLite:
TcpExt:
4 TCP sockets finished time wait in fast timer
4 delayed acks sent
1862 packet headers predicted
40 acknowledgments not containing data payload received
18 predicted acknowledgments
TCPRcvCoalesce: 4
IpExt:
InNoRoutes: 2
InBcastPkts: 28
InOctets: 2799111
OutOctets: 111101
InBcastOctets: 7126
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor
Family DRAM Controller [8086:0104] (rev 09)
Subsystem: Lenovo Device [17aa:21da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if
00 [VGA controller])
Subsystem: Lenovo Device [17aa:21da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 5000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series
Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
Subsystem: Lenovo Device [17aa:21da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at d2625000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:16.3 Serial controller [0700]: Intel Corporation 6 Series/C200 Series
Chipset Family KT Controller [8086:1c3d] (rev 04) (prog-if 02 [16550])
Subsystem: Lenovo Device [17aa:21da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 50b0 [size=8]
Region 1: Memory at d262c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network
Connection [8086:1502] (rev 04)
Subsystem: Lenovo Device [17aa:21ce]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 40
Region 0: Memory at d2600000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d262b000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 5080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:21da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d262a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset
Family High Definition Audio Controller [8086:1c20] (rev 04)
Subsystem: Lenovo Device [17aa:21da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d2620000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: d2500000-d25fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d1d00000-d24fffff
Prefetchable memory behind bridge: 00000000d0400000-00000000d0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d1500000-d1cfffff
Prefetchable memory behind bridge: 00000000d0c00000-00000000d13fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset
Family PCI Express Root Port 7 [8086:1c1c] (rev b4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
Memory behind bridge: d1400000-d14fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:21da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d2629000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset Family LPC
Controller [8086:1c4f] (rev 04)
Subsystem: Lenovo Device [17aa:21da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:21da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 46
Region 0: I/O ports at 50a8 [size=8]
Region 1: I/O ports at 50bc [size=4]
Region 2: I/O ports at 50a0 [size=8]
Region 3: I/O ports at 50b8 [size=4]
Region 4: I/O ports at 5060 [size=32]
Region 5: Memory at d2628000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family
SMBus Controller [8086:1c22] (rev 04)
Subsystem: Lenovo Device [17aa:21da]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d2624000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N +
WiMAX 6250 [Kilmer Peak] [8086:0089] (rev 5e)
Subsystem: Intel Corporation Centrino Advanced-N + WiMAX 6250 2x2 AGN
[8086:1311]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at d2500000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
0d:00.0 System peripheral [0880]: Ricoh Co Ltd MMC/SD Host Controller
[1180:e822] (rev 07) (prog-if 01)
Subsystem: Lenovo Device [17aa:21da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d1500000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
0e:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host
Controller [1033:0194] (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo Device [17aa:21da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d1400000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 004 Device 003: ID 8086:0187 Intel Corp.
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 04f2:b217 Chicony Electronics Co., Ltd Lenovo Integrated
Camera (0.3MP)
Bus 003 Device 008: ID 05f3:0007 PI Engineering, Inc. Kinesis Advantage PRO
MPC/USB Keyboard
Bus 003 Device 007: ID 05f3:0081 PI Engineering, Inc. Kinesis Integrated Hub
Bus 003 Device 006: ID 047d:2041 Kensington SlimBlade Trackball
Bus 003 Device 005: ID 1852:db96 GYROCOM C&C Co., LTD
Bus 003 Device 003: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (500, 'testing'), (99, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.10-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.10-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.113
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.10-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.10-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.10 <none>
Versions of packages linux-image-3.10-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.39
pn firmware-libertas <none>
ii firmware-linux 0.39
ii firmware-linux-nonfree 0.39
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.10-1-amd64/postinst/depmod-error-initrd-3.10-1-amd64: false
linux-image-3.10-1-amd64/prerm/removing-running-kernel-3.10-1-amd64: true
linux-image-3.10-1-amd64/postinst/ignoring-ramdisk:
* linux-image-3.10-1-amd64/postinst/missing-firmware-3.10-1-amd64:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/20130803035608.5358.57421.report...@neroon.zhar.net
