Package: src:linux Version: 3.2.41-2 Severity: normal The Chicony/Sonix USB webcam using the uvcvideo driver does not work on my Lenovo 3000 N200 laptop. The webcam is detected during bootup, and turns on when using applications such as cheese and skype, but there is no image produced.
The webcam worked correctly under Squeeze, so this is a regression. There is a report about a similar problem on Ubuntu at http://askubuntu.com/questions/264193/12-10-webcam-stopped-working-after-update, which indicates that the problem may have been fixed again in more recent kernels. -- Package-specific info: ** Version: Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=UUID=5925aa58-07cb-40d6-b790-4832612bdcd4 ro quiet ** Not tainted ** Kernel log: [ 6.387011] Bluetooth: HCI socket layer initialized [ 6.387015] Bluetooth: L2CAP socket layer initialized [ 6.387222] Bluetooth: SCO socket layer initialized [ 6.430038] iwl3945 0000:04:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 6.430043] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 6.430204] iwl3945 0000:04:00.0: irq 46 for MSI/MSI-X [ 6.430383] Registered led device: phy0-led [ 6.477707] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' [ 6.498362] [drm] initialized overlay support [ 6.533816] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x25c0b1, caps: 0xa04713/0x200000/0x0 [ 6.582426] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 6.583401] usbcore: registered new interface driver btusb [ 6.620464] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 6.667891] fbcon: inteldrmfb (fb0) is primary device [ 6.978225] Console: switching to colour frame buffer device 160x50 [ 6.984253] fb0: inteldrmfb frame buffer device [ 6.984256] drm: registered panic notifier [ 7.072177] acpi device:07: registered as cooling_device2 [ 7.072406] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6 [ 7.072482] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 7.072528] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 7.072969] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 7.073012] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 7.631308] Linux media interface: v0.10 [ 7.640755] Linux video capture interface: v2.00 [ 7.667797] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b013) [ 7.672857] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.1/usb3/3-2/3-2:1.0/input/input7 [ 7.673000] usbcore: registered new interface driver uvcvideo [ 7.673003] USB Video Class driver (1.1.1) [ 7.694285] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 7.837102] cfg80211: World regulatory domain updated: [ 7.837106] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 7.837111] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.837116] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7.837120] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7.837124] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.837128] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.417445] Adding 3903788k swap on /dev/sda3. Priority:-1 extents:1 across:3903788k [ 9.446389] EXT4-fs (sda5): re-mounted. Opts: (null) [ 10.015599] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 10.149523] loop: module loaded [ 12.118330] kjournald starting. Commit interval 5 seconds [ 12.118606] EXT3-fs (sda1): using internal journal [ 12.118615] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 12.161621] kjournald starting. Commit interval 5 seconds [ 12.162018] EXT3-fs (sda6): using internal journal [ 12.162028] EXT3-fs (sda6): mounted filesystem with ordered data mode [ 12.213325] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 13.065394] tg3 0000:06:00.0: irq 48 for MSI/MSI-X [ 13.095640] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.836553] tg3 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex [ 14.836561] tg3 0000:06:00.0: eth0: Flow control is on for TX and on for RX [ 14.836880] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 17.357607] RPC: Registered named UNIX socket transport module. [ 17.357614] RPC: Registered udp transport module. [ 17.357618] RPC: Registered tcp transport module. [ 17.357622] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 17.405217] FS-Cache: Loaded [ 17.449474] FS-Cache: Netfs 'nfs' registered for caching [ 17.458674] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 19.644946] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9 [ 20.451668] Bluetooth: RFCOMM TTY layer initialized [ 20.451676] Bluetooth: RFCOMM socket layer initialized [ 20.451679] Bluetooth: RFCOMM ver 1.11 [ 20.701143] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.701148] Bluetooth: BNEP filters: protocol multicast [ 23.083410] iwl3945 0000:04:00.0: firmware: agent aborted loading iwlwifi-3945-2.ucode (not found?) [ 23.089124] iwl3945 0000:04:00.0: firmware: agent aborted loading iwlwifi-3945-1.ucode (not found?) [ 23.091334] iwl3945 0000:04:00.0: Could not read microcode: -2 [ 24.848125] eth0: no IPv6 routers present [ 25.972164] lp: driver loaded but no devices found [ 26.117270] ppdev: user-space parallel port driver [ 391.008639] iwl3945 0000:04:00.0: firmware: agent loaded iwlwifi-3945-2.ucode into memory [ 391.008646] iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9 [ 391.078565] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 402.034728] wlan0: authenticate with f4:ec:38:cb:c7:58 (try 1) [ 402.036554] wlan0: authenticated [ 402.036865] wlan0: associate with f4:ec:38:cb:c7:58 (try 1) [ 402.039967] wlan0: RX AssocResp from f4:ec:38:cb:c7:58 (capab=0x411 status=0 aid=1) [ 402.039974] wlan0: associated [ 402.044070] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 412.100135] wlan0: no IPv6 routers present [ 1184.088390] tg3 0000:06:00.0: eth0: Link is down [ 1669.926322] wlan0: deauthenticating from f4:ec:38:cb:c7:58 by local choice (reason=3) [ 1669.936733] cfg80211: Calling CRDA to update world regulatory domain [ 1669.951357] cfg80211: World regulatory domain updated: [ 1669.951362] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1669.951366] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1669.951371] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1669.951375] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1669.951379] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1669.951383] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1675.374754] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1685.934520] wlan0: authenticate with f4:ec:38:cb:c7:58 (try 1) [ 1685.936360] wlan0: authenticated [ 1685.936701] wlan0: associate with f4:ec:38:cb:c7:58 (try 1) [ 1685.939378] wlan0: RX AssocResp from f4:ec:38:cb:c7:58 (capab=0x411 status=0 aid=1) [ 1685.939385] wlan0: associated [ 1685.941198] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1696.384056] wlan0: no IPv6 routers present ** Model information not available ** Loaded modules: cryptd aes_i586 aes_generic parport_pc ppdev lp parport bnep rfcomm uinput nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ext3 jbd loop snd_hda_codec_realtek uvcvideo videodev media joydev btusb snd_hda_intel snd_hda_codec snd_hwdep arc4 snd_pcm bluetooth iwl3945 r852 snd_page_alloc iwl_legacy sm_common i915 nand r592 drm_kms_helper drm i2c_algo_bit iTCO_wdt iTCO_vendor_support acpi_cpufreq mperf nand_ecc nand_ids memstick mtd mac80211 snd_seq snd_seq_device snd_timer cfg80211 snd rfkill soundcore i2c_i801 psmouse pcspkr serio_raw coretemp i2c_core evdev processor ac video button battery thermal_sys power_supply wmi ext4 crc16 jbd2 mbcache sg sd_mod sr_mod cdrom crc_t10dif ata_generic ata_piix ahci libahci libata uhci_hcd firewire_ohci ehci_hcd sdhci_pci sdhci mmc_core firewire_core crc_itu_t scsi_mod tg3 usbcore libphy usb_common ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN qlen 1000 link/ether 00:1b:38:09:92:2c brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:1b:77:8f:91:10 brd ff:ff:ff:ff:ff:ff inet 192.168.0.101/24 brd 192.168.0.255 scope global wlan0 inet6 fe80::21b:77ff:fe8f:9110/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 43699 655 0 0 0 0 0 0 43699 655 0 0 0 0 0 0 wlan0: 81698681 71446 0 0 0 0 0 0 4814215 40418 0 0 0 0 0 0 eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 75952 total packets received 5 with invalid addresses 0 forwarded 0 incoming packets discarded 75476 incoming packets delivered 43760 requests sent out 8 outgoing packets dropped Icmp: 307 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 307 302 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 302 IcmpMsg: InType3: 307 OutType3: 302 Tcp: 607 active connections openings 13 passive connection openings 3 failed connection attempts 37 connection resets received 5 connections established 70559 segments received 37697 segments send out 171 segments retransmited 26 bad segments received. 148 resets sent Udp: 4452 packets received 8 packets to unknown port received. 0 packet receive errors 5508 packets sent UdpLite: TcpExt: 247 TCP sockets finished time wait in fast timer 546 delayed acks sent 1 delayed acks further delayed because of locked socket Quick ack mode was activated 103 times 53098 packet headers predicted 7447 acknowledgments not containing data payload received 448 predicted acknowledgments 1 times recovered from packet loss by selective acknowledgements 3 congestion windows recovered without slow start by DSACK 87 congestion windows recovered without slow start after partial ack 1 fast retransmits 1 retransmits in slow start 119 other TCP timeouts 98 DSACKs sent for old packets 39 DSACKs received 15 connections reset due to unexpected data 35 connections reset due to early user close 3 connections aborted due to timeout TCPDSACKIgnoredNoUndo: 10 TCPSackShiftFallback: 12 TCPChallengeACK: 26 TCPSYNChallenge: 26 IpExt: InMcastPkts: 716 OutMcastPkts: 543 InBcastPkts: 2 InOctets: 84719945 OutOctets: 3647024 InMcastOctets: 138256 OutMcastOctets: 106824 InBcastOctets: 656 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c) Subsystem: Lenovo Device [17aa:383c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:383e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 45 Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=1M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 1800 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 0c) Subsystem: Lenovo Device [17aa:383e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fc100000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:3846] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:3847] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:3849] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fc504800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) Subsystem: Lenovo Device [17aa:384e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 47 Region 0: Memory at fc300000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f6000000-f7ffffff Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f8000000-f9ffffff Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: fa000000-fbffffff Prefetchable memory behind bridge: 00000000f4000000-00000000f5ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: c8000000-c9ffffff Prefetchable memory behind bridge: 00000000cc000000-00000000cdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:3843] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:3844] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device [17aa:3845] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 18a0 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:3848] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fc504c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=32 Memory behind bridge: fc200000-fc2fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03) Subsystem: Lenovo Device [17aa:3840] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Lenovo Device [17aa:386d] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1810 [size=16] Kernel driver in use: ata_piix 00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device [17aa:386c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 44 Region 0: I/O ports at 1c00 [size=8] Region 1: I/O ports at 18d4 [size=4] Region 2: I/O ports at 18d8 [size=8] Region 3: I/O ports at 18d0 [size=4] Region 4: I/O ports at 18e0 [size=32] Region 5: Memory at fc504000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03) Subsystem: Lenovo Device [17aa:3842] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 19 Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1c20 [size=32] 04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4227] (rev 02) Subsystem: Intel Corporation ThinkPad R60e/X60s [8086:1011] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: iwl3945 06:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02) Subsystem: Lenovo Device [17aa:3861] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at c8000000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 08:06.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (prog-if 10 [OHCI]) Subsystem: Lenovo Device [17aa:3829] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max) Interrupt: pin A routed to IRQ 22 Region 0: Memory at fc200000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 08:06.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19) Subsystem: Lenovo Device [17aa:382a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin B routed to IRQ 23 Region 0: Memory at fc200800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 08:06.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 0a) Subsystem: Lenovo Device [17aa:382c] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 23 Region 0: Memory at fc201000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: r592 08:06.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 05) Subsystem: Lenovo Device [17aa:382d] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 23 Region 0: Memory at fc201400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: r852 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor Bus 003 Device 003: ID 04f2:b013 Chicony Electronics Co., Ltd USB 2.0 Camera Bus 005 Device 002: ID 0a5c:2101 Broadcom Corp. BCM2045 Bluetooth -- System Information: Debian Release: 7.0 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'testing'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 3.2.0-4-686-pae (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-686-pae depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109.1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.2.0-4-686-pae recommends: ii firmware-linux-free 3.2 ii libc6-i686 2.13-38 Versions of packages linux-image-3.2.0-4-686-pae suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u1 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 0.36+wheezy.1 pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.36+wheezy.1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae: false linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae: true linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae: linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20130622005856.8337.43866.reportbug@muillap.stewjar
