Package: src:linux Version: 3.9.6-1 Severity: normal File: linux-image-3.9 Dear Maintainer,
after the last kernel update from 3.2.x to 3.9.x in Debian "Jessie", a warning is shown upon boot up about some CPU microcode not being found. In my case, the warning is the following one: platform microcode: firmware: agent aborted loading intel-ucode/06-2a-07 (not found?) Other users seem to also have found this exactly after upgrading the kernel as I did: http://forums.debian.net/viewtopic.php?f=5&t=94248#p502708 Installing intel-microcode fixes this, but it's a non-free package. If the previous 3.2 kernel didn't produce this warning, I think there should be some way to avoid installing that package in order to properly load the required CPU microcodes. Thanks! -- Package-specific info: ** Version: Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-4) ) #1 SMP Debian 3.9.6-1 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.9-1-amd64 root=UUID=28c225a1-305c-493e-9946-f2e52bf08193 ro quiet ** Tainted: C (1024) * Module from drivers/staging has been loaded. ** Kernel log: [ 6.102980] ACPI Error: Method parse/execution failed [\_SB_.ATKD.WMNB] (Node ffff88011a2c7308), AE_ALREADY_EXISTS (20130117/psparse-537) [ 6.103191] ACPI Error: [IIA0] Namespace lookup failure, AE_ALREADY_EXISTS (20130117/dsfield-211) [ 6.103196] ACPI Error: Method parse/execution failed [\_SB_.ATKD.WMNB] (Node ffff88011a2c7308), AE_ALREADY_EXISTS (20130117/psparse-537) [ 6.103262] ACPI: Marking method WMNB as Serialized because of AE_ALREADY_EXISTS error [ 6.105062] uvcvideo: Found UVC 1.00 device ASUS USB2.0 Webcam (1bcf:2883) [ 6.113276] asus-nb-wmi: probe of asus-nb-wmi failed with error -5 [ 6.122175] input: ASUS USB2.0 Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input6 [ 6.122229] usbcore: registered new interface driver uvcvideo [ 6.122230] USB Video Class driver (1.1.1) [ 6.270669] ath: EEPROM regdomain: 0x60 [ 6.270672] ath: EEPROM indicates we should expect a direct regpair map [ 6.270675] ath: Country alpha2 being used: 00 [ 6.270677] ath: Regpair used: 0x60 [ 6.272172] psmouse serio4: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 6.297336] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 6.297587] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90009980000, irq=17 [ 6.637161] cfg80211: World regulatory domain updated: [ 6.637162] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.637165] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.637167] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.637168] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.637170] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.637171] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.720845] Console: switching to colour frame buffer device 170x48 [ 6.730685] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 6.730689] i915 0000:00:02.0: registered panic notifier [ 6.737077] acpi device:32: registered as cooling_device4 [ 6.744971] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 6.745117] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 6.745284] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 6.745487] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 6.769535] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03) [ 6.783204] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e. [ 6.853920] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8 [ 6.954965] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 6.955174] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 6.955382] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 7.816443] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 9.154956] Adding 7812092k swap on /dev/sda3. Priority:-1 extents:1 across:7812092k [ 9.185143] EXT4-fs (sda2): re-mounted. Opts: (null) [ 9.555327] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 9.772755] fuse init (API version 7.21) [ 9.818978] loop: module loaded [ 11.098949] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 11.318707] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 11.958745] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.019868] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 12.152283] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 12.998903] RPC: Registered named UNIX socket transport module. [ 12.998907] RPC: Registered udp transport module. [ 12.998908] RPC: Registered tcp transport module. [ 12.998910] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.040380] FS-Cache: Loaded [ 13.049167] Key type dns_resolver registered [ 13.094423] FS-Cache: Netfs 'nfs' registered for caching [ 13.149149] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 15.687582] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 [ 18.208423] Bluetooth: Core ver 2.16 [ 18.208451] NET: Registered protocol family 31 [ 18.208453] Bluetooth: HCI device and connection manager initialized [ 18.208461] Bluetooth: HCI socket layer initialized [ 18.208463] Bluetooth: L2CAP socket layer initialized [ 18.208468] Bluetooth: SCO socket layer initialized [ 18.472992] Bluetooth: RFCOMM TTY layer initialized [ 18.473008] Bluetooth: RFCOMM socket layer initialized [ 18.473010] Bluetooth: RFCOMM ver 1.11 [ 18.706315] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.706319] Bluetooth: BNEP filters: protocol multicast [ 18.706329] Bluetooth: BNEP socket layer initialized [ 18.940152] lp: driver loaded but no devices found [ 18.957113] ppdev: user-space parallel port driver [ 21.785758] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.789389] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.658989] Ebtables v2.0 registered [ 24.082242] wlan0: authenticate with c0:ac:54:01:79:82 [ 24.100455] wlan0: send auth to c0:ac:54:01:79:82 (try 1/3) [ 24.103316] wlan0: authenticated [ 24.103675] wlan0: associate with c0:ac:54:01:79:82 (try 1/3) [ 24.107726] wlan0: RX AssocResp from c0:ac:54:01:79:82 (capab=0x431 status=0 aid=1) [ 24.107812] wlan0: associated [ 24.107820] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 24.107932] cfg80211: Calling CRDA for country: ES [ 24.114355] ath: regdomain 0x82d4 updated by CountryIE [ 24.114364] ath: EEPROM regdomain: 0x82d4 [ 24.114368] ath: EEPROM indicates we should expect a country code [ 24.114373] ath: doing EEPROM country->regdmn map search [ 24.114377] ath: country maps to regdmn code: 0x37 [ 24.114381] ath: Country alpha2 being used: ES [ 24.114385] ath: Regpair used: 0x37 [ 24.114415] cfg80211: Regulatory domain changed to country: ES [ 24.114419] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.114425] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 24.114430] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 24.114434] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 24.114439] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 25.308006] [UFW BLOCK] IN=wlan0 OUT= MAC=dc:85:de:88:b9:98:00:78:9e:48:78:ef:08:00 SRC=108.160.162.45 DST=192.168.1.14 LEN=231 TOS=0x00 PREC=0x00 TTL=43 ID=16806 DF PROTO=TCP SPT=80 DPT=38065 WINDOW=41 RES=0x00 ACK PSH URGP=0 [ 33.446655] [UFW BLOCK] IN=wlan0 OUT= MAC=dc:85:de:88:b9:98:00:78:9e:48:78:ef:08:00 SRC=108.160.162.45 DST=192.168.1.14 LEN=231 TOS=0x00 PREC=0x00 TTL=43 ID=16807 DF PROTO=TCP SPT=80 DPT=38065 WINDOW=41 RES=0x00 ACK PSH URGP=0 [ 53.944982] [UFW BLOCK] IN=wlan0 OUT= MAC=dc:85:de:88:b9:98:00:78:9e:48:78:ef:08:00 SRC=108.160.162.45 DST=192.168.1.14 LEN=231 TOS=0x00 PREC=0x00 TTL=43 ID=16808 DF PROTO=TCP SPT=80 DPT=38065 WINDOW=41 RES=0x00 ACK PSH URGP=0 [ 94.677901] [UFW BLOCK] IN=wlan0 OUT= MAC=dc:85:de:88:b9:98:00:78:9e:48:78:ef:08:00 SRC=108.160.162.45 DST=192.168.1.14 LEN=231 TOS=0x00 PREC=0x00 TTL=43 ID=16809 DF PROTO=TCP SPT=80 DPT=38065 WINDOW=41 RES=0x00 ACK PSH URGP=0 [ 165.303805] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. ** Model information sys_vendor: ASUSTeK COMPUTER INC. product_name: X55CR product_version: 1.0 chassis_vendor: ASUSTeK COMPUTER INC. chassis_version: 1.0 bios_vendor: American Megatrends Inc. bios_version: X55CR.404 board_vendor: ASUSTeK COMPUTER INC. board_name: X55CR board_version: 1.0 ** Loaded modules: ebtable_nat ebtables parport_pc ppdev lp parport bnep rfcomm bluetooth binfmt_misc uinput nfsd auth_rpcgss nfs_acl nfs lockd dns_resolver fscache sunrpc xt_hl ip6t_rt nf_conntrack_ipv6 nf_defrag_ipv6 ipt_REJECT xt_LOG xt_limit xt_tcpudp xt_addrtype nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ip6table_filter ip6_tables nf_conntrack_netbios_ns nf_conntrack_broadcast nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack iptable_filter ip_tables x_tables nls_utf8 nls_cp437 vfat fat loop fuse snd_hda_codec_hdmi joydev snd_hda_codec_via arc4 ath9k ath9k_common ath9k_hw uvcvideo ath asus_wmi videobuf2_vmalloc videobuf2_memops videobuf2_core mac80211 snd_hda_intel snd_hda_codec cfg80211 sparse_keymap snd_hwdep rfkill videodev i915 drm_kms_helper drm snd_pcm_oss snd_mixer_oss media acpi_cpufreq i2c_algo_bit psmouse snd_pcm iTCO_wdt iTCO_vendor_support coretemp mperf i2c_i801 pcspkr serio_raw mei efivars i2c_core lpc_ich processor mfd_core snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi video evdev kvm_intel battery kvm snd_seq crc32c_intel ghash_clmulni_intel wmi button ac snd_seq_device snd_timer snd cryptd soundcore ext4 crc16 jbd2 mbcache dm_mod sg sr_mod sd_mod cdrom crc_t10dif ahci libahci libata scsi_mod thermal thermal_sys xhci_hcd ehci_pci ehci_hcd alx(C) microcode usbcore usb_common ** Network interface configuration: auto lo iface lo inet loopback ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000 link/ether 08:60:6e:04:49:cc brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether dc:85:de:88:b9:98 brd ff:ff:ff:ff:ff:ff inet 192.168.1.14/24 brd 192.168.1.255 scope global wlan0 valid_lft forever preferred_lft forever inet6 fe80::de85:deff:fe88:b998/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 lo: 1344 12 0 0 0 0 0 0 1344 12 0 0 0 0 0 0 wlan0: 1500860 1287 0 0 0 0 0 0 119856 952 0 0 0 0 0 0 *** Protocol statistics: Ip: 1346 total packets received 0 forwarded 0 incoming packets discarded 1253 incoming packets delivered 930 requests sent out 40 dropped because of missing route Icmp: 0 ICMP messages received 0 input ICMP message failed. ICMP input histogram: 14 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 14 IcmpMsg: OutType3: 14 Tcp: 25 active connections openings 0 passive connection openings 2 failed connection attempts 3 connection resets received 5 connections established 1103 segments received 719 segments send out 2 segments retransmited 0 bad segments received. 5 resets sent Udp: 138 packets received 14 packets to unknown port received. 0 packet receive errors 195 packets sent UdpLite: TcpExt: 11 TCP sockets finished time wait in fast timer 20 delayed acks sent Quick ack mode was activated 2 times 873 packet headers predicted 61 acknowledgments not containing data payload received 3 predicted acknowledgments 2 congestion windows recovered without slow start after partial ack 2 other TCP timeouts 2 DSACKs sent for old packets 2 DSACKs received 3 connections reset due to early user close TCPDSACKIgnoredNoUndo: 1 TCPRcvCoalesce: 604 IpExt: InNoRoutes: 1 InMcastPkts: 19 OutMcastPkts: 21 InBcastPkts: 49 OutBcastPkts: 43 InOctets: 1493173 OutOctets: 84291 InMcastOctets: 3589 OutMcastOctets: 3669 InBcastOctets: 6975 OutBcastOctets: 6124 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: ASUSTeK Computer Inc. Device [1043:14c7] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:14c7] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:14c7] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 41 Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:14c7] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at f7e1a000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:14c7] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7e18000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:1c33] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: f7d00000-f7dfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f7c00000-f7cfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:14c7] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7e17000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:14c7] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:14c7] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 42 Region 0: I/O ports at f0b0 [size=8] Region 1: I/O ports at f0a0 [size=4] Region 2: I/O ports at f090 [size=8] Region 3: I/O ports at f080 [size=4] Region 4: I/O ports at f060 [size=32] Region 5: Memory at f7e16000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:14c7] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f7e15000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] 02:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01) Subsystem: AzureWave Device [1a3b:1186] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=512K] Expansion ROM at f7d80000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k 03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 Gigabit Ethernet [1969:1091] (rev 10) Subsystem: ASUSTeK Computer Inc. Device [1043:14c7] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 40 Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at e000 [size=128] Capabilities: <access denied> Kernel driver in use: alx ** USB devices: Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1bcf:2883 Sunplus Innovation Technology Inc. -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.9-1-amd64 (SMP w/4 CPU cores) Locale: LANG=es_ES.utf8, LC_CTYPE=es_ES.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.9-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.50 ii initramfs-tools [linux-initramfs-tool] 0.112 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.9-1-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.9-1-amd64 suggests: pn debian-kernel-handbook <none> pn grub-pc | extlinux | lilo <none> pn linux-doc-3.9 <none> Versions of packages linux-image-3.9-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.9-1-amd64/postinst/ignoring-ramdisk: linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64: linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20130621222612.4473.12595.report...@ugi.home
