Your message dated Tue, 11 Jun 2013 02:07:35 +0100
with message-id <1370912855.15470.3.ca...@deadeye.wl.decadent.org.uk>
and subject line Re: Bug#711888: linux-image-3.9-1-amd64: Problem with cooling
when running CPU intensive tasks
has caused the Debian Bug report #711888,
regarding linux-image-3.9-1-amd64: Problem with cooling when running CPU
intensive tasks
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
711888: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=711888
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: src:linux
Version: 3.9.4-1
Severity: normal
When running regular tasks, fans run at regular level and mantain CPU
temperature at regular leves, i.e: http://foolcontrol.org/img/temp47.png
However, if I do CPU intensive tasks such as if I play Half Life 2 on Steam, or
even watch a video on Youtube in HQ. Temperatures get incredibly high with fans
working on maximum. i.e: http://foolcontrol.org/img/temp85.png
I also had same problem on 3.8, please inform me if you have any other comments
or questions.
Adnan
-- Package-specific info:
** Version:
Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2
(Debian 4.7.2-5) ) #1 SMP Debian 3.9.4-1
** Command line:
BOOT_IMAGE=/vmlinuz-3.9-1-amd64 root=/dev/mapper/havoc-root ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[17330.355889] ehci-pci 0000:00:1d.0: setting latency timer to 64
[17330.355929] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[17330.390152] tpm_tis 00:09: TPM is disabled/deactivated (0x6)
[17330.570235] usb 1-4: reset high-speed USB device number 2 using xhci_hcd
[17330.586298] usb 1-4: device firmware changed
[17330.658307] usb 3-1.4: reset full-speed USB device number 4 using ehci-pci
[17330.674026] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[17330.674650] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[17330.674654] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[17330.676312] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[17330.676315] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK)
filtered out
[17330.677124] ata1.00: configured for UDMA/133
[17330.690047] sd 0:0:0:0: [sda] Starting disk
[17330.752080] btusb 3-1.4:1.0: no reset_resume for driver btusb?
[17330.752082] btusb 3-1.4:1.1: no reset_resume for driver btusb?
[17330.822205] usb 3-1.6: reset high-speed USB device number 5 using ehci-pci
[17331.037704] PM: resume of devices complete after 682.626 msecs
[17331.038346] PM: Finishing wakeup.
[17331.038348] Restarting tasks ... done.
[17331.046500] video LNXVIDEO:00: Restoring backlight state
[17331.053752] usb 1-4: USB disconnect, device number 2
[17331.055327] cdc_ncm 1-4:1.6 wwan0: unregister 'cdc_ncm' usb-0000:00:14.0-4,
Mobile Broadband Network Device
[17331.082211] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff88021269e340
[17331.082216] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff88021269e380
[17331.082219] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff88021269e2c0
[17331.082222] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff88021269e300
[17331.082225] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff88021269e1c0
[17331.082227] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff88021269e200
[17331.082230] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff880211d92ac0
[17331.082232] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff88021269e240
[17331.082235] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff88021269e280
[17331.082238] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff880211d92b40
[17331.082240] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff880211d92b00
[17331.082243] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff880211d92b80
[17331.082245] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff880211d92bc0
[17331.082248] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with
disabled ep ffff880211d92c00
[17331.250604] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[17331.266278] usb 1-4: New USB device found, idVendor=0bdb, idProduct=1927
[17331.266291] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[17331.266312] usb 1-4: Product: H5321 gw
[17331.266320] usb 1-4: Manufacturer: Lenovo
[17331.266328] usb 1-4: SerialNumber: 8BD2F4B2E6D85CC0
[17331.267679] usb 1-4: USB disconnect, device number 3
[17331.451488] hidraw: raw HID events driver (C) Jiri Kosina
[17331.458646] usbcore: registered new interface driver usbhid
[17331.458656] usbhid: USB HID core driver
[17331.478274] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[17331.485579] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[17331.696575] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[17332.013615] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[17332.353128] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[17332.370661] usb 1-4: New USB device found, idVendor=0bdb, idProduct=1926
[17332.370672] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[17332.370679] usb 1-4: Product: H5321 gw
[17332.370684] usb 1-4: Manufacturer: Lenovo
[17332.370689] usb 1-4: SerialNumber: 8BD2F4B2E6D85CC0
[17332.401988] cdc_acm 1-4:1.1: ttyACM0: USB ACM device
[17332.405856] cdc_acm 1-4:1.3: ttyACM1: USB ACM device
[17332.414038] cdc_wdm 1-4:1.5: cdc-wdm0: USB WDM device
[17332.429447] usb 1-4: MAC-Address: 02:15:e0:ec:01:00
[17332.430065] cdc_ncm 1-4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:14.0-4,
Mobile Broadband Network Device, 02:15:e0:ec:01:00
[17332.430904] cdc_wdm 1-4:1.8: cdc-wdm1: USB WDM device
[17332.431317] cdc_acm 1-4:1.9: ttyACM2: USB ACM device
[17338.440644] wlan0: authenticate with 72:b6:86:74:46:e0
[17338.444310] wlan0: send auth to 72:b6:86:74:46:e0 (try 1/3)
[17338.446873] wlan0: authenticated
[17338.447269] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[17338.449993] wlan0: associate with 72:b6:86:74:46:e0 (try 1/3)
[17338.452671] wlan0: RX AssocResp from 72:b6:86:74:46:e0 (capab=0x431 status=0
aid=2)
[17338.455134] wlan0: associated
[17338.455197] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[17338.455382] cfg80211: Calling CRDA for country: CA
[17338.470814] cfg80211: Regulatory domain changed to country: CA
[17338.470827] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[17338.470836] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2700 mBm)
[17338.470843] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
1700 mBm)
[17338.470850] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[17338.470856] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[17338.470862] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
3000 mBm)
[17338.896222] IPv6: wlan0: IPv6 duplicate address fe80::8e70:5aff:fe80:f75c
detected!
[17699.980011] CPU3: Package power limit notification (total events = 46912)
[17699.980014] CPU2: Package power limit notification (total events = 46911)
[17699.980016] CPU0: Package power limit notification (total events = 46918)
[17699.980018] CPU1: Package power limit notification (total events = 46918)
[17699.991029] CPU2: Package power limit normal
[17699.991031] CPU3: Package power limit normal
[17699.991040] CPU0: Package power limit normal
[17699.991041] CPU1: Package power limit normal
[17999.837191] CPU1: Package power limit normal
[17999.837194] CPU0: Package power limit normal
[17999.837214] CPU3: Package power limit normal
[17999.837216] CPU2: Package power limit normal
[18299.682631] CPU2: Package power limit notification (total events = 82160)
[18299.682633] CPU3: Package power limit notification (total events = 82159)
[18299.682643] CPU0: Package power limit notification (total events = 82174)
[18299.682646] CPU1: Package power limit notification (total events = 82172)
[18299.688330] CPU2: Package power limit normal
[18299.688332] CPU3: Package power limit normal
[18299.688354] CPU1: Package power limit normal
[18299.688356] CPU0: Package power limit normal
** Model information
sys_vendor: LENOVO
product_name: 3444CTO
product_version: ThinkPad X1 Carbon
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: G6ET59WW (2.03 )
board_vendor: LENOVO
board_name: 3444CTO
board_version: Not Defined
** Loaded modules:
usbhid
hid
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
parport_pc
ppdev
lp
parport
vboxdrv(O)
bnep
rfcomm
binfmt_misc
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
ext2
loop
fuse
snd_hda_codec_hdmi
snd_hda_codec_realtek
joydev
cdc_mbim
uvcvideo
videobuf2_vmalloc
videobuf2_memops
btusb
videobuf2_core
videodev
bluetooth
cdc_ncm
media
usbnet
cdc_acm
cdc_wdm
mii
iTCO_wdt
iTCO_vendor_support
arc4
snd_hda_intel
coretemp
kvm_intel
snd_hda_codec
snd_hwdep
iwldvm
snd_pcm
snd_page_alloc
kvm
mac80211
snd_seq
psmouse
snd_seq_device
pcspkr
snd_timer
thinkpad_acpi
i915
serio_raw
nvram
acpi_cpufreq
battery
mperf
evdev
ac
snd
iwlwifi
tpm_tis
i2c_i801
tpm
tpm_bios
drm_kms_helper
cfg80211
lpc_ich
drm
mfd_core
video
wmi
rfkill
i2c_algo_bit
i2c_core
soundcore
mei
button
processor
ext4
crc16
jbd2
mbcache
dm_crypt
dm_mod
sg
sd_mod
crc_t10dif
crc32c_intel
ghash_clmulni_intel
ahci
libahci
aesni_intel
libata
aes_x86_64
ablk_helper
cryptd
xts
lrw
gf128mul
ehci_pci
ehci_hcd
scsi_mod
microcode
xhci_hcd
sdhci_pci
sdhci
mmc_core
thermal
thermal_sys
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM
Controller [8086:0154] (rev 09)
Subsystem: Lenovo Device [17aa:21f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core
processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:21f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo Device [17aa:21f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f1500000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Lenovo Device [17aa:21f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f1515000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei
00:16.3 Serial controller [0700]: Intel Corporation 7 Series/C210 Series
Chipset Family KT Controller [8086:1e3d] (rev 04) (prog-if 02 [16550])
Subsystem: Lenovo Device [17aa:21f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 4090 [size=8]
Region 1: Memory at f151b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:21f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f151a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Lenovo Device [17aa:21f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f1510000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0d00000-f14fffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f0c00000-f0cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:21f9]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f1519000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation QS77 Express Chipset LPC
Controller [8086:1e56] (rev 04)
Subsystem: Lenovo Device [17aa:21f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family
6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:21f9]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at 4088 [size=8]
Region 1: I/O ports at 409c [size=4]
Region 2: I/O ports at 4080 [size=8]
Region 3: I/O ports at 4098 [size=4]
Region 4: I/O ports at 4060 [size=32]
Region 5: Memory at f1518000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller [8086:1e22] (rev 04)
Subsystem: Lenovo Device [17aa:21f9]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f1514000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel driver in use: i801_smbus
02:00.0 System peripheral [0880]: Ricoh Co Ltd MMC/SD Host Controller
[1180:e822] (rev 07) (prog-if 01)
Subsystem: Lenovo Device [17aa:21f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0d00000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205
[Taylor Peak] [8086:0085] (rev 96)
Subsystem: Intel Corporation Device [8086:c220]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f0c00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
** USB devices:
Bus 001 Device 004: ID 0bdb:1926 Ericsson Business Mobile Networks BV
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 147e:2020 Upek TouchChip Fingerprint Coprocessor (WBF
advanced mode)
Bus 003 Device 004: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0
[ThinkPad]
Bus 003 Device 005: ID 04f2:b315 Chicony Electronics Co., Ltd
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (600, 'unstable'), (500, 'stable-updates'), (300, 'testing'),
(200, 'stable'), (100, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.9-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.9-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.50
ii initramfs-tools [linux-initramfs-tool] 0.112
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.9-1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.9-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-14
pn linux-doc-3.9 <none>
Versions of packages linux-image-3.9-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.38
pn firmware-libertas <none>
ii firmware-linux 0.38
ii firmware-linux-nonfree 0.38
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.9-1-amd64/postinst/ignoring-ramdisk:
* linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64:
linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true
linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false
--- End Message ---
--- Begin Message ---
On Mon, 2013-06-10 at 19:23 +0200, Adnan Hodzic wrote:
> Package: src:linux
> Version: 3.9.4-1
> Severity: normal
>
> When running regular tasks, fans run at regular level and mantain CPU
> temperature at regular leves, i.e: http://foolcontrol.org/img/temp47.png
>
> However, if I do CPU intensive tasks such as if I play Half Life 2 on Steam,
> or
> even watch a video on Youtube in HQ. Temperatures get incredibly high with
> fans
> working on maximum. i.e: http://foolcontrol.org/img/temp85.png
>
> I also had same problem on 3.8, please inform me if you have any other
> comments
> or questions.
This is expected behaviour.
Ben.
--
Ben Hutchings
If God had intended Man to program,
we'd have been born with serial I/O ports.
signature.asc
Description: This is a digitally signed message part
--- End Message ---
