Package: src:linux Version: 3.2.41-2 Severity: normal Dear Maintainer,
my system has a PCI multi IO card (2 serial, 1 parallel port) with the NetMos 9835 chipset. The PCI card worked well in squeeze. After upgarde to wheezy the parallel port is not longer detected. When a print job is queued and the squeeze kernel get booted the job is printed. Message from /var/log/message related to the multi io card when running on wheezy are: [ 0.756263] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16 [ 0.776456] 0000:01:05.0: ttyS1 at I/O 0xdc00 (irq = 16) is a 16550A [ 0.808213] 0000:01:05.0: ttyS2 at I/O 0xd880 (irq = 16) is a 16550A Messages from squeeze: [ 3.454300] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16 [ 3.454315] parport_serial 0000:01:05.0: PCI INT A -> Link[LNKA] -> GSI 16 (level, low) -> IRQ 16 [ 3.454333] parport0: PC-style at 0xd800 [PCSPP,TRISTATE,EPP] [ 3.466874] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS [ 3.467040] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:18/LNXVIDEO:00/input/input5 [ 3.467070] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 3.486976] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded [ 3.488397] parport0: Printer, Hewlett-Packard HP LaserJet 1100 [ 3.488539] 0000:01:05.0: ttyS1 at I/O 0xdc00 (irq = 16) is a 16550A [ 3.488629] 0000:01:05.0: ttyS2 at I/O 0xd880 (irq = 16) is a 16550A At least one other user has the same problem too: http://debianforum.de/forum/viewtopic.php?f=13&t=142814&p=936672#p936672 The slightly newer kernel version (3.2.41-2+deb7u2) has the problem too. -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=2d5475d5-fb2e-455b-a504-0822abb601b8 ro libata.force=noncq nmi_watchdog=0 nr_uarts=1 quiet ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 3.577908] IR LIRC bridge handler initialized [ 3.582331] All bytes are equal. It is not a TEA5767 [ 3.582346] tuner 1-0060: Tuner -1 found with type(s) Radio TV. [ 3.605547] nvidia: module license 'NVIDIA' taints kernel. [ 3.605555] Disabling lock debugging due to kernel taint [ 3.707171] tda9887 1-0043: creating new instance [ 3.707179] tda9887 1-0043: tda988[5/6/7] found [ 3.708036] scsi 9:0:0:0: Direct-Access Generic USB CF Reader 0.00 PQ: 0 ANSI: 2 [ 3.708107] tuner 1-0043: Tuner 74 found with type(s) Radio TV. [ 3.708480] scsi 9:0:0:1: Direct-Access Generic USB SD Reader 0.00 PQ: 0 ANSI: 2 [ 3.708845] scsi 9:0:0:2: Direct-Access Generic USB MS Reader 0.00 PQ: 0 ANSI: 2 [ 3.709219] scsi 9:0:0:3: Direct-Access Generic USB SM Reader 0.00 PQ: 0 ANSI: 2 [ 3.709680] sd 9:0:0:0: Attached scsi generic sg9 type 0 [ 3.710054] sd 9:0:0:1: Attached scsi generic sg10 type 0 [ 3.710171] sd 9:0:0:2: Attached scsi generic sg11 type 0 [ 3.710395] sd 9:0:0:3: Attached scsi generic sg12 type 0 [ 3.716092] sd 9:0:0:0: [sdi] Attached SCSI removable disk [ 3.716713] sd 9:0:0:1: [sdj] Attached SCSI removable disk [ 3.717338] sd 9:0:0:2: [sdk] Attached SCSI removable disk [ 3.720338] sd 9:0:0:3: [sdl] Attached SCSI removable disk [ 3.788200] cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01 [ 3.788842] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21 [ 3.788863] nvidia 0000:02:00.0: setting latency timer to 64 [ 3.788873] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 3.789194] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013 [ 3.791633] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0 [ 3.791646] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0 [ 3.792126] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 [ 3.792135] hda_intel: Disabling MSI [ 3.792202] snd_hda_intel 0000:00:07.0: setting latency timer to 64 [ 3.815840] tuner-simple 1-0060: creating new instance [ 3.815845] tuner-simple 1-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 3.860032] Registered IR keymap rc-winfast [ 3.860126] input: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:08.0/0000:01:07.0/rc/rc0/input5 [ 3.860176] rc0: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:08.0/0000:01:07.0/rc/rc0 [ 3.860182] cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 19, latency: 32, mmio: 0xf9000000 [ 3.860231] cx88[0]/0: set_audio_standard_BTSC (status: known-good) [ 3.862726] cx88[0]/0: registered device video0 [v4l2] [ 3.862778] cx88[0]/0: registered device vbi0 [ 3.862817] cx88[0]/0: registered device radio0 [ 3.874396] cx88[0]/0: cx88: tvaudio thread started [ 3.886550] cx88[0]/0: set_audio_standard_FM (status: unknown) [ 3.886574] cx88[0]/0: cx88_set_stereo: mask 0x3f, ctl 0x1a [status=0x22,ctl=0x101a,vol=0x40] [ 4.065529] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input6 [ 5.980998] Adding 9764860k swap on /dev/sdb1. Priority:-1 extents:1 across:9764860k [ 6.168915] EXT3-fs (sda1): using internal journal [ 6.217417] loop: module loaded [ 9.298714] kjournald starting. Commit interval 5 seconds [ 9.298971] EXT3-fs (sdb10): using internal journal [ 9.298981] EXT3-fs (sdb10): mounted filesystem with ordered data mode [ 9.319564] kjournald starting. Commit interval 5 seconds [ 9.319937] EXT3-fs (sdb11): using internal journal [ 9.319946] EXT3-fs (sdb11): mounted filesystem with ordered data mode [ 9.353305] kjournald starting. Commit interval 5 seconds [ 9.353561] EXT3-fs (sdb5): using internal journal [ 9.353570] EXT3-fs (sdb5): mounted filesystem with ordered data mode [ 9.365949] kjournald starting. Commit interval 5 seconds [ 9.366922] EXT3-fs (sdc5): using internal journal [ 9.366933] EXT3-fs (sdc5): mounted filesystem with ordered data mode [ 9.404639] kjournald starting. Commit interval 5 seconds [ 9.404898] EXT3-fs (sdb9): using internal journal [ 9.404907] EXT3-fs (sdb9): mounted filesystem with ordered data mode [ 9.459880] kjournald starting. Commit interval 5 seconds [ 9.460691] EXT3-fs (sdb6): using internal journal [ 9.460702] EXT3-fs (sdb6): mounted filesystem with ordered data mode [ 9.493077] kjournald starting. Commit interval 5 seconds [ 9.493345] EXT3-fs (sdb8): using internal journal [ 9.493354] EXT3-fs (sdb8): mounted filesystem with ordered data mode [ 10.729963] RPC: Registered named UNIX socket transport module. [ 10.729971] RPC: Registered udp transport module. [ 10.729977] RPC: Registered tcp transport module. [ 10.729982] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 10.742139] FS-Cache: Loaded [ 10.761015] FS-Cache: Netfs 'nfs' registered for caching [ 10.766808] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 10.984890] fuse init (API version 7.17) [ 12.053811] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 12.070578] NFSD: starting 90-second grace period [ 12.549495] Bluetooth: Core ver 2.16 [ 12.549515] NET: Registered protocol family 31 [ 12.549516] Bluetooth: HCI device and connection manager initialized [ 12.549519] Bluetooth: HCI socket layer initialized [ 12.549520] Bluetooth: L2CAP socket layer initialized [ 12.549523] Bluetooth: SCO socket layer initialized [ 12.552225] Bluetooth: RFCOMM TTY layer initialized [ 12.552229] Bluetooth: RFCOMM socket layer initialized [ 12.552231] Bluetooth: RFCOMM ver 1.11 [ 12.571898] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.571900] Bluetooth: BNEP filters: protocol multicast [ 12.606690] forcedeth 0000:00:0a.0: irq 44 for MSI/MSI-X [ 12.672480] lp: driver loaded but no devices found [ 12.686509] ppdev: user-space parallel port driver [ 23.088018] eth0: no IPv6 routers present [ 36.235650] cx88[0]/0: set_audio_standard_FM (status: unknown) [ 36.235677] cx88[0]/0: cx88_set_stereo: mask 0x3f, ctl 0x1a [status=0x22,ctl=0x101a,vol=0x40] [ 36.249199] cx88[0]/0: set_audio_standard_FM (status: unknown) [ 36.249222] cx88[0]/0: cx88_set_stereo: mask 0x3f, ctl 0x1a [status=0x22,ctl=0x101a,vol=0x40] [ 36.252917] cx88[0]/0: set_audio_standard_FM (status: unknown) [ 36.252942] cx88[0]/0: cx88_set_stereo: mask 0x3f, ctl 0x1a [status=0x22,ctl=0x101a,vol=0x40] [ 36.280072] cx88[0]/0: set_audio_standard_FM (status: unknown) ** Model information sys_vendor: System manufacturer product_name: System Product Name product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 1004 board_vendor: ASUSTeK Computer INC. board_name: M4N78 PRO board_version: Rev 1.xx ** Loaded modules: parport_serial parport_pc ppdev lp parport bnep rfcomm bluetooth rfkill crc16 cpufreq_stats cpufreq_powersave cpufreq_conservative cpufreq_userspace fuse nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop snd_hda_codec_hdmi snd_hda_codec_via rc_winfast tuner_simple tuner_types snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc tda9887 nvidia(P) snd_seq_midi snd_seq_midi_event tda8290 tea5767 ir_lirc_codec lirc_dev ir_mce_kbd_decoder tuner snd_rawmidi ir_sony_decoder ir_jvc_decoder snd_seq ir_rc6_decoder snd_seq_device snd_timer snd cx8800 ir_rc5_decoder psmouse shpchp powernow_k8 edac_mce_amd mperf ir_nec_decoder cx88xx btcx_risc tveeprom videobuf_dma_sg videobuf_core v4l2_common videodev v4l2_compat_ioctl32 media rc_core i2c_algo_bit edac_core serio_raw pcspkr evdev k10temp soundcore asus_atk0110 video wmi i2c_nforce2 i2c_core button processor thermal_sys ext3 mbcache jbd sr_mod usb_storage sg cdrom sd_mod crc_t10dif ata_generic floppy xhci_hcd ohci_hcd pata_amd ahci libahci ehci_hcd libata scsi_mod forcedeth usbcore usb_common ** Network interface configuration: auto lo iface lo inet loopback allow-hotplug eth0 allow-hotplug usb0 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1320 qdisc pfifo_fast state UP qlen 1000 link/ether 00:26:18:ae:09:6e brd ff:ff:ff:ff:ff:ff inet 192.168.178.3/24 brd 192.168.178.255 scope global eth0 inet6 fe80::226:18ff:feae:96e/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 56550 231 0 0 0 0 0 0 56550 231 0 0 0 0 0 0 eth0: 5926211 5343 0 0 0 0 0 0 490322 4049 0 0 0 0 0 0 *** Protocol statistics: Ip: 5622 total packets received 0 forwarded 0 incoming packets discarded 5622 incoming packets delivered 4228 requests sent out 144 dropped because of missing route Icmp: 0 ICMP messages received 0 input ICMP message failed. ICMP input histogram: 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: Tcp: 91 active connections openings 11 passive connection openings 4 failed connection attempts 5 connection resets received 1 connections established 5076 segments received 3694 segments send out 3 segments retransmited 0 bad segments received. 26 resets sent Udp: 584 packets received 0 packets to unknown port received. 0 packet receive errors 528 packets sent UdpLite: TcpExt: 24 TCP sockets finished time wait in fast timer 104 delayed acks sent Quick ack mode was activated 1 times 178 packets directly queued to recvmsg prequeue. 56495 bytes directly received in process context from prequeue 3813 packet headers predicted 47 packets header predicted and directly queued to user 228 acknowledgments not containing data payload received 229 predicted acknowledgments 1 times recovered from packet loss by selective acknowledgements Detected reordering 2 times using time stamp 1 congestion windows fully recovered without slow start 2 congestion windows partially recovered using Hoe heuristic 1 fast retransmits 1 forward retransmits 1 other TCP timeouts 1 DSACKs sent for old packets 2 DSACKs received 6 connections reset due to unexpected data 5 connections reset due to early user close TCPDSACKIgnoredNoUndo: 1 TCPSackShifted: 4 TCPSackMerged: 1 TCPSackShiftFallback: 2 IpExt: InMcastPkts: 33 OutMcastPkts: 35 InBcastPkts: 56 OutBcastPkts: 51 InOctets: 5918065 OutOctets: 483092 InMcastOctets: 4318 OutMcastOctets: 4450 InBcastOctets: 8996 OutBcastOctets: 7356 ** PCI devices: 00:00.0 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075c] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: I/O ports at 2f00 [size=256] 00:01.1 SMBus [0c05]: NVIDIA Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 2900 [size=64] Region 4: I/O ports at 2d00 [size=64] Region 5: I/O ports at 2e00 [size=64] Capabilities: <access denied> Kernel driver in use: nForce2_smbus 00:01.2 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.3 Co-processor [0b40]: NVIDIA Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 10 Region 0: Memory at f8f80000 (32-bit, non-prefetchable) [size=512K] 00:01.4 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:02.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at f8f7e000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:02.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at f8f7fc00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:04.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at f8f7d000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:04.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 20 Region 0: Memory at f8f7f800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:06.0 IDE interface [0101]: NVIDIA Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: pata_amd 00:07.0 Audio device [0403]: NVIDIA Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1) Subsystem: ASUSTeK Computer Inc. Device [1043:836c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at f8f78000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f9000000-f9ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:09.0 SATA controller [0106]: NVIDIA Corporation MCP78S [GeForce 8200] AHCI Controller [10de:0ad4] (rev a2) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 43 Region 0: I/O ports at c480 [size=8] Region 1: I/O ports at c400 [size=4] Region 2: I/O ports at c080 [size=8] Region 3: I/O ports at c000 [size=4] Region 4: I/O ports at bc00 [size=16] Region 5: Memory at f8f76000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci 00:0a.0 Ethernet controller [0200]: NVIDIA Corporation MCP77 Ethernet [10de:0760] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 44 Region 0: Memory at f8f7c000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at b880 [size=8] Region 2: Memory at f8f7f400 (32-bit, non-prefetchable) [size=256] Region 3: Memory at f8f7f000 (32-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: forcedeth 00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fa000000-fbefffff Prefetchable memory behind bridge: 00000000d6000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:13.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:14.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Memory behind bridge: fbf00000-fbffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:05.0 Communication controller [0780]: NetMos Technology PCI 9835 Multi-I/O Controller [9710:9835] (rev 01) Subsystem: LSI Logic / Symbios Logic 1P2S [1000:0012] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at dc00 [size=8] Region 1: I/O ports at d880 [size=8] Region 2: I/O ports at d800 [size=8] Region 3: I/O ports at d480 [size=8] Region 4: I/O ports at d400 [size=8] Region 5: I/O ports at d080 [size=16] Kernel driver in use: serial 01:07.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05) Subsystem: LeadTek Research Inc. Winfast TV 2000XP Expert [107d:6611] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M] Capabilities: <access denied> Kernel driver in use: cx8800 02:00.0 VGA compatible controller [0300]: NVIDIA Corporation C77 [GeForce 8300] [10de:0848] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:82e2] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 21 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d8000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at d6000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at ec00 [size=128] [virtual] Expansion ROM at fbee0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia 05:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) (prog-if 30 [XHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fbffe000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0ea0:2126 Ours Technology, Inc. 7-in-1 Card Reader Bus 004 Device 002: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub Bus 004 Device 003: ID 1307:0330 Transcend Information, Inc. 63-in-1 Multi-Card Reader/Writer -- System Information: Debian Release: 7.0 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109.1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.2.0-4-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u1 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.36+wheezy.1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20130610172459.5357.26135.report...@sle3.camline.com
