Your message dated Mon, 14 Jan 2013 22:17:35 +0000
with message-id <e1tuslx-0003nn...@franck.debian.org>
and subject line Bug#635840: fixed in firmware-free 3.2
has caused the Debian Bug report #635840,
regarding Missing firmware for carl9170 driver
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)
--
635840: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=635840
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 3.0.0-1
Severity: normal
Tags: sid
I cannot raise up my wireless interface using kernel 3.0:
# ifconfig wlan0 up
wla0n: ERROR while getting interface flags: No such device
With kernel 2.6.39 I'm able to run the same command and get a stable connection
(using wpa_supplicant).
I've used ar9170usb module but now it was removed and replaced by carl9170
(http://linuxwireless.org/en/users/Drivers/ar9170)
# lsusb
Bus 001 Device 003: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N
v2 [Atheros AR9001U-(2)NG]
dmesg doesn't give any useful information about how my device was registered.
Thank you and sorry about my english.
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: OEM
product_name:
product_version:
chassis_vendor: OEM
chassis_version:
bios_vendor: OEM
bios_version: 1.09
board_vendor: OEM
board_name: N/A
board_version: N/A
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** PCI devices:
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 671MX [1039:0671]
Subsystem: Elitegroup Computer Systems Device [1019:5050]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-sis
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SiS AGP Port
(virtual PCI-to-PCI bridge) [1039:0003] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: b0000000-b00fffff
Prefetchable memory behind bridge: c0000000-cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS968 [MuTIOL
Media IO] [1039:0968] (rev 01)
Subsystem: Elitegroup Computer Systems Device [1019:5a00]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE]
[1039:5513] (rev 01) (prog-if 80 [Master])
Subsystem: Elitegroup Computer Systems Device [1019:5a00]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Interrupt: pin ? routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1080 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_sis
00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1
Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device [1019:5a00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at b0104000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1
Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems Device [1019:5a00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at b0105000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:03.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0
Controller [1039:7002] (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Device [1019:5a00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max)
Interrupt: pin C routed to IRQ 22
Region 0: Memory at b0106000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191
Gigabit Ethernet Adapter [1039:0191] (rev 02)
Subsystem: Elitegroup Computer Systems Device [1019:5a00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: Memory at b0307000 (32-bit, non-prefetchable) [size=128]
Region 1: I/O ports at 1000 [size=128]
Capabilities: <access denied>
Kernel driver in use: sis190
00:05.0 IDE interface [0101]: Silicon Integrated Systems [SiS] SATA Controller
/ IDE mode [1039:1183] (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Silicon Integrated Systems [SiS] SATA Controller / IDE mode
[1039:1183]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 10c8 [size=8]
Region 1: I/O ports at 10bc [size=4]
Region 2: I/O ports at 10c0 [size=8]
Region 3: I/O ports at 10b8 [size=4]
Region 4: I/O ports at 10a0 [size=16]
Capabilities: <access denied>
Kernel driver in use: sata_sis
00:0f.0 Audio device [0403]: Silicon Integrated Systems [SiS] Azalia Audio
Controller [1039:7502]
Subsystem: Elitegroup Computer Systems Device [1019:5a00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at b0100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS]
771/671 PCIE VGA Display Adapter [1039:6351] (rev 10) (prog-if 00 [VGA
controller])
Subsystem: Elitegroup Computer Systems Device [1019:5050]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
BIST result: 00
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: Memory at b0000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 9000 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N
v2 [Atheros AR9001U-(2)NG]
Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard
reader
Bus 003 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 003 Device 003: ID 0c10:0000
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.39-2-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.0.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy
ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs
ii linux-base 3.3 Linux image base package
ii module-init-tools 3.16-1 tools for managing Linux kernel mo
Versions of packages linux-image-3.0.0-1-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-3.0.0-1-amd64 suggests:
ii grub-pc 1.99-9 GRand Unified Bootloader, version
pn linux-doc-3.0.0 <none> (no description available)
Versions of packages linux-image-3.0.0-1-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-3.0.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.0.0-1-amd64/prerm/removing-running-kernel-3.0.0-1-amd64: true
linux-image-3.0.0-1-amd64/postinst/missing-firmware-3.0.0-1-amd64:
linux-image-3.0.0-1-amd64/postinst/depmod-error-initrd-3.0.0-1-amd64: false
--- End Message ---
--- Begin Message ---
Source: firmware-free
Source-Version: 3.2
We believe that the bug you reported is fixed in the latest version of
firmware-free, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 635...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Ben Hutchings <b...@decadent.org.uk> (supplier of updated firmware-free package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Format: 1.8
Date: Mon, 14 Jan 2013 22:02:47 +0000
Source: firmware-free
Binary: firmware-linux-free
Architecture: source all
Version: 3.2
Distribution: unstable
Urgency: low
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Ben Hutchings <b...@decadent.org.uk>
Description:
firmware-linux-free - Binary firmware for various drivers in the Linux kernel
Closes: 635840
Changes:
firmware-free (3.2) unstable; urgency=low
.
* Update to linux-support 3.2.0-4
* Add Atheros AR9170 free firmware for use with carl9170 (Closes: #635840)
Checksums-Sha1:
d1aa0b7824c7d4f2a86e4ea46a4886247b516c42 1790 firmware-free_3.2.dsc
72c4162baa27040557eb2e5ccccfc581c3bcd3c3 230930 firmware-free_3.2.tar.gz
a35ccd7e9d54239b4c60ee0e4b729a08992a8db0 20662 firmware-linux-free_3.2_all.deb
Checksums-Sha256:
6f65bb995f11796c79821977345532a61c0cbb87bc479dd1201a760ee45205ec 1790
firmware-free_3.2.dsc
f34d3b22fb88702dd866e6da11b5f652d5d6777a0e2b976a2e84c3437786666d 230930
firmware-free_3.2.tar.gz
b485a7c11f889044de6a22b595a45524e5f91a2a6b757cff06aebc004ce451b2 20662
firmware-linux-free_3.2_all.deb
Files:
bd5df0583a2e4fea9968422f5f6661d4 1790 kernel optional firmware-free_3.2.dsc
ec256aa0cc3131ec9be211a104d99bb9 230930 kernel optional
firmware-free_3.2.tar.gz
c0db2b20f88293d8441ab3206270d686 20662 kernel optional
firmware-linux-free_3.2_all.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=sZwn
-----END PGP SIGNATURE-----
--- End Message ---
