Package: src:linux
Version: 3.2.35-2
Severity: normal
File: uvesafb
Dear Maintainer,
the Intel i815 integrated with this graphics card has relatively significant
compatibility issues with many Linux kernels and loaders.
LILO prompts about pressing Enter to list video modes on every boot. Can use
vga=normal or vga=ext, but noting down a video mode and passing it to a 2.4
kernel doesn't work properly.
GRUB2 can display a graphic menu. On both 2.6.32-5-686 and 3.2.35-2-686-pae
kernels, trying to increase the resolution via gfxpayload produces unreadable
text due to it being squished together. (on my CRT monitor, it appears brighter
than the standard dim white, comparable to "bold" bright white).
In the GRUB2 command line, `vbeinfo` turns the screen black and `vbetest` just
displays a blinking cursor. Ctrl+Alt+Del is the only way out.
Running `modprobe uvesafb` returns "[timestamp] uvesafb: vbe_init() failed with
-22" and the /sys/bus/platform/drivers/uvesafb/uvesafb.0/vbe_modes file,
supposed to contain available resolutions, isn't created. Re-running the
command produces no output.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version
4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae
root=UUID=64d759db-b054-499c-9d71-34634055e5c3 ro quiet
** Not tainted
** Kernel log:
[ 8.811351] usbcore: registered new device driver usb
[ 8.857268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.858028] ehci_hcd 0000:01:01.2: EHCI Host Controller
[ 8.858151] ehci_hcd 0000:01:01.2: new USB bus registered, assigned bus
number 1
[ 8.880092] ehci_hcd 0000:01:01.2: irq 10, io mem 0xec100400
[ 8.892204] ehci_hcd 0000:01:01.2: USB 2.0 started, EHCI 1.00
[ 8.892326] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.892338] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.892348] usb usb1: Product: EHCI Host Controller
[ 8.892356] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 8.892364] usb usb1: SerialNumber: 0000:01:01.2
[ 8.892907] hub 1-0:1.0: USB hub found
[ 8.892927] hub 1-0:1.0: 5 ports detected
[ 8.898502] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.898642] ohci_hcd 0000:01:01.0: OHCI Host Controller
[ 8.898699] ohci_hcd 0000:01:01.0: new USB bus registered, assigned bus
number 2
[ 8.898756] ohci_hcd 0000:01:01.0: irq 7, io mem 0xec101000
[ 8.902534] Floppy drive(s): fd0 is 1.44M
[ 8.919622] FDC 0 is a National Semiconductor PC87306
[ 8.930307] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.930538] uhci_hcd 0000:00:1f.2: setting latency timer to 64
[ 8.930551] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 8.930599] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus
number 3
[ 8.930664] uhci_hcd 0000:00:1f.2: irq 11, io base 0x00001820
[ 8.930799] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.930810] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.930819] usb usb3: Product: UHCI Host Controller
[ 8.930827] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 8.930836] usb usb3: SerialNumber: 0000:00:1f.2
[ 8.931666] hub 3-0:1.0: USB hub found
[ 8.931687] hub 3-0:1.0: 2 ports detected
[ 8.985315] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.985330] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.985340] usb usb2: Product: OHCI Host Controller
[ 8.985348] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 8.985357] usb usb2: SerialNumber: 0000:01:01.0
[ 9.004209] hub 2-0:1.0: USB hub found
[ 9.004249] hub 2-0:1.0: 3 ports detected
[ 9.004581] ohci_hcd 0000:01:01.1: OHCI Host Controller
[ 9.004615] ohci_hcd 0000:01:01.1: new USB bus registered, assigned bus
number 4
[ 9.004673] ohci_hcd 0000:01:01.1: irq 11, io mem 0xec102000
[ 9.090381] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.090394] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 9.090404] usb usb4: Product: OHCI Host Controller
[ 9.090412] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 9.090420] usb usb4: SerialNumber: 0000:01:01.1
[ 9.091220] hub 4-0:1.0: USB hub found
[ 9.091244] hub 4-0:1.0: 2 ports detected
[ 9.106517] parport_pc 00:0c: reported by Plug and Play ACPI
[ 9.106580] parport0: PC-style at 0x278, irq 5 [PCSPP]
[ 9.121601] iTCO_vendor_support: vendor-support=0
[ 9.134945] 3c59x: Donald Becker and others.
[ 9.134998] 0000:01:04.0: 3Com PCI 3c905C Tornado at d073a000.
[ 9.183575] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 9.183590] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 9.185553] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 9.240157] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 9.242943] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 9.250097] iTCO_wdt: Found a ICH TCO device (Version=1, TCOBASE=0x1060)
[ 9.252711] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.276583] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.277428] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 9.282957] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 9.383452] psmouse serio1: synaptics: Touchpad model: 1, fw: 4.6, id:
0xb5aa1, caps: 0x804710/0x0/0x0
[ 9.405752] usb 3-1: New USB device found, idVendor=1241, idProduct=1111
[ 9.405769] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9.418839] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input4
[ 9.569798] snd_intel8x0 0000:00:1f.5: enabling device (0000 -> 0001)
[ 9.569876] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[ 10.047623] input: HID 1241:1111 as
/devices/pci0000:00/0000:00:1f.2/usb3/3-1/3-1:1.0/input/input5
[ 10.049806] generic-usb 0003:1241:1111.0001: input,hidraw0: USB HID v1.00
Mouse [HID 1241:1111] on usb-0000:00:1f.2-1/input0
[ 10.050759] usbcore: registered new interface driver usbhid
[ 10.050769] usbhid: USB HID core driver
[ 10.164071] intel8x0_measure_ac97_clock: measured 55288 usecs (2658 samples)
[ 10.164085] intel8x0: clocking to 48000
[ 15.654848] Adding 649212k swap on /dev/sda4. Priority:-1 extents:1
across:649212k
[ 16.559575] EXT3-fs (sda2): using internal journal
[ 16.757522] fuse init (API version 7.17)
[ 16.848368] loop: module loaded
[ 87.994178] kjournald starting. Commit interval 5 seconds
[ 87.994719] EXT3-fs (sda3): using internal journal
[ 87.994734] EXT3-fs (sda3): mounted filesystem with ordered data mode
[ 88.257602] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts:
(null)
[ 90.626435] eth0: setting full-duplex.
[ 94.978400] lp0: using parport0 (interrupt-driven).
[ 95.055177] ppdev: user-space parallel port driver
[ 101.360043] eth0: no IPv6 routers present
[ 355.763518] parport_pc 00:0c: disabled
[ 355.799943] parport 0x278 (WARNING): CTR: wrote 0x0c, read 0xff
[ 355.799959] parport 0x278 (WARNING): DATA: wrote 0xaa, read 0xff
[ 355.799967] parport 0x278: You gave this address, but there is probably no
parallel port there!
[ 355.799992] parport0: PC-style at 0x278 [PCSPP,TRISTATE]
[ 356.047337] parport_pc 00:0c: activated
[ 356.047354] parport_pc 00:0c: reported by Plug and Play ACPI
[ 356.047412] parport0: PC-style at 0x278, irq 5 [PCSPP]
[ 356.191960] lp0: using parport0 (interrupt-driven).
[ 356.227963] ppa: Version 2.07 (for Linux 2.4.x)
[ 356.312504] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 359.558599] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 359.558610] EDD information not available.
** Model information
not available
** Loaded modules:
st
lp
parport_pc
ppdev
snd_hrtimer
ext4
crc16
jbd2
ext2
loop
fuse
usbhid
hid
joydev
snd_intel8x0
snd_ac97_codec
snd_pcm_oss
snd_mixer_oss
sg
sr_mod
snd_pcm
iTCO_wdt
3c59x
cdrom
iTCO_vendor_support
snd_page_alloc
mii
snd_seq_midi
snd_seq_midi_event
parport
uhci_hcd
floppy
ohci_hcd
snd_rawmidi
ehci_hcd
snd_seq
usbcore
intel_rng
rng_core
psmouse
i2c_i801
snd_seq_device
snd_timer
i2c_core
snd
pcspkr
soundcore
ac97_bus
shpchp
usb_common
evdev
serio_raw
container
processor
thermal_sys
button
ext3
mbcache
jbd
sd_mod
crc_t10dif
ata_generic
ata_piix
libata
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82815 815 Chipset Host Bridge and
Memory Controller Hub [8086:1130] (rev 02)
Subsystem: Intel Corporation 82815 815 Chipset Host Bridge and Memory
Controller Hub [8086:1130]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82815 Chipset
Graphics Controller (CGC) [8086:1132] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:1245]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at ec000000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:1e.0 PCI bridge [0604]: Intel Corporation 82801AA PCI Bridge [8086:2418]
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: ec100000-ec1fffff
Prefetchable memory behind bridge: 10000000-100fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801AA ISA Bridge (LPC)
[8086:2410] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801AA IDE Controller
[8086:2411] (rev 02) (prog-if 80 [Master])
Subsystem: Intel Corporation 82801AA IDE Controller [8086:2411]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at 1800 [size=16]
Kernel driver in use: ata_piix
00:1f.2 USB controller [0c03]: Intel Corporation 82801AA USB Controller
[8086:2412] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801AA USB Controller [8086:2412]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1f.3 SMBus [0c05]: Intel Corporation 82801AA SMBus Controller [8086:2413]
(rev 02)
Subsystem: Intel Corporation 82801AA SMBus Controller [8086:2413]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 9
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97
Audio Controller [8086:2415] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1249]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 9
Region 0: I/O ports at 1200 [size=256]
Region 1: I/O ports at 1300 [size=64]
Kernel driver in use: snd_intel8x0
01:01.0 USB controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
(prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 7
Region 0: Memory at ec101000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
01:01.1 USB controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
(prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at ec102000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
01:01.2 USB controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04)
(prog-if 20 [EHCI])
Subsystem: NEC Corporation USB 2.0 [1033:00e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 132 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 10
Region 0: Memory at ec100400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
01:04.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado]
[10b7:9200] (rev 78)
Subsystem: Hewlett-Packard Company Device [103c:1246]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 80 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at 2000 [size=128]
Region 1: Memory at ec100000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 10000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3c59x
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 1241:1111 Belkin Mouse
-- System Information:
Debian Release: 7.0
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-4-686-pae (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-686-pae recommends:
ii firmware-linux-free 3.1
ii libc6-i686 2.13-38
Versions of packages linux-image-3.2.0-4-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-26
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae:
false
linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae:
true
linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae:
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20130114185643.3550.36079.report...@vectra.lan
