Package: linux-2.6 Version: 3.1.6-1 Severity: important Dear Maintainer,
The kernel image provided by package linux-image-3.1.0-1-kirkwood don't support the LaCie Kirkwood boards. Please, consider applying the following patch: diff --git a/config/armel/config.kirkwood b/config/armel/config.kirkwood index 1eae313..85b0c64 100644 --- a/config/armel/config.kirkwood +++ b/config/armel/config.kirkwood @@ -63,6 +63,12 @@ CONFIG_MACH_DOCKSTAR=y CONFIG_MACH_OPENRD_BASE=y CONFIG_MACH_OPENRD_CLIENT=y CONFIG_MACH_OPENRD_ULTIMATE=y +CONFIG_MACH_NETSPACE_V2=y +CONFIG_MACH_INETSPACE_V2=y +CONFIG_MACH_NETSPACE_MAX_V2=y +CONFIG_MACH_D2NET_V2=y +CONFIG_MACH_NET2BIG_V2=y +CONFIG_MACH_NET5BIG_V2=y CONFIG_MACH_T5325=y ## @@ -172,6 +178,11 @@ CONFIG_GPIO_SYSFS=y # CONFIG_DRM is not set ## +## file: drivers/hwmon/Kconfig +## +CONFIG_SENSORS_GPIO_FAN=m + +## ## file: drivers/i2c/Kconfig ## CONFIG_I2C=y @@ -244,6 +255,8 @@ CONFIG_ISDN_DIVAS_MAINT=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_NS2=y +CONFIG_LEDS_NETXBIG=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y Regards, Simon -- Package-specific info: Here are the boot logs: Marvell>> set bootcmd "ext2load ide 0:1 0x800000 /boot/uImage-3.1.0-1-kirkwood; ext2load ide 0:1 0x1200000 /boot/initrd.img-3.1.0-1-kirkwood; setenv bootargs console=ttyS0,115200 initrd=0x1200000 root=/dev/sda1; bootm 0x800000" Marvell>> saveenv Marvell>> run bootcmd ## Valid DOS partition found ## ## Valid DOS partition found ## 1577596 bytes read ## Valid DOS partition found ## ## Valid DOS partition found ## 6559762 bytes read ## Booting image at 00800000 ... Image Name: linux-3.1 Created: 2011-11-19 5:20:45 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1577532 Bytes = 1.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK bootargs from environment variables : console=ttyS0,115200 initrd=0x1200000 root=/dev/sda1 cap=gpt,lba64 Starting kernel ... Uncompressing Linux... done, booting the kernel. Error: unrecognized/unsupported machine ID (r1 = 0x00000899). Available machine support: ID (hex) NAME 00000690 Marvell DB-88F6281-BP Development Board 00000691 Marvell RD-88F6192-NAS Development Board 00000692 Marvell RD-88F6281 Reference Board 0000078c Marvell 88F6281 GTW GE Board 00000a76 Marvell eSATA SheevaPlug Reference Board 00000831 Marvell SheevaPlug Reference Board 00000a63 Marvell GuruPlug Reference Board 00000bb6 Seagate FreeAgent DockStar 0000085b QNAP TS-119/TS-219 000009c6 QNAP TS-41x 00000b44 Marvell OpenRD Ultimate Board 00000939 Marvell OpenRD Client Board 00000915 Marvell OpenRD Base Board 00000b1e HP t5325 Thin Client Please check your kernel config and/or bootloader. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: armel (armv5tel) Kernel: Linux 2.6.31.14-g2d85800-dirty Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.1.0-1-kirkwood depends on: ii debconf [debconf-2.0] 1.5.28 ii initramfs-tools [linux-initramfs-tool] 0.99 ii linux-base 3.4 ii module-init-tools 3.12~pre1-1 Versions of packages linux-image-3.1.0-1-kirkwood recommends: ii firmware-linux-free 3 ii uboot-mkimage 2011.12-2 Versions of packages linux-image-3.1.0-1-kirkwood suggests: pn fdutils <none> pn linux-doc-3.1 <none> Versions of packages linux-image-3.1.0-1-kirkwood is related to: pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn xen-hypervisor <none> -- debconf information excluded
signature.asc
Description: Digital signature
